LLRN 7.5
These are low-level release notes for IP Fabric release branch 7.5. Please note, that this page contains very low-level information about the actual release, which can lead to false conclusions if you don’t have access to the tickets. On the other hand, it can provide valuable information, if you are looking for a particular detail. This release branch contains a total of 961 fixed issues.
7.5.11
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-21825– High – Cisco WLC-Air - no 2.4 GHz radios visible in BSSID table [requested check from customer]NIM-21860– High – Parsing issues on PaloAltoNIM-21881– High – Missing APs for older WLC version than 9800NIM-21885– High – Juniper / F5 - Saved config consistency - current config not availableNIM-21896– High – Cisco ios-xr - Saved config consistency - current config not availableNIM-21954– High – PSQL Slow Managed IPv4 address tableNIM-21955– Highest – Slow PSQL query for Snapshot Inventory tableNIM-21995– High – Missing data for not present power supplies for Cisco IOS-XENIM-22018– Medium – Management > Confguration - filter Statusno changedoes not workNIM-22064– Highest – pre-upgrade-check timed out after 60 seconds due to IPF checker I/ONIM-22073– Highest – Config import failing on required ‘discovery-history’
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-21893– Highest – Huawei YunShan - fix ver detection and run disco as VRPNIM-21948– Medium – [ipf-checker] - implement json outputNIM-21973– Highest – Add support for Discovery History export/import
7.5.10
Epics
Epics are high-level features, that may consist of many tasks.
NIM-21859– High – Azure Mapping failures
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-20279– Highest – Username’s credentials are not sanitizedNIM-21363– Highest – Do recursive MPLS lookupNIM-21631– High – Palo Alto Parsing and Mapping issuesNIM-21649– High – IOS-XR PTP missing informationNIM-21688– High – UI - wrongly displayed IPv6 addresses with portsNIM-21725– Highest – ACI - E2E PL - improvement of routing after SGNIM-21743– Highest – STP instance queries are tremendously slowNIM-21748– Highest – ACI - E2E PL - wrongly dropped ethernet headerNIM-21760– High – X-API-* Response Headers missing when wrong version is used.NIM-21813– Medium – Unencrypted passwords in configuration show in sanitized configuration downloads in management configurationNIM-21815– High – Addressing -> MAC Table is empty for Juniper devicesNIM-21835– High – GCP Inventory table does not load with column dev.attributes does not exist errorNIM-21841– Highest – PSQL slow getSnHostnameLoginTypeLists query during Tasker calculationsNIM-21848– Highest – Can’t import 7.3.20 config onto 7.5.8/7.5.9NIM-21855– Highest – IPF 7.5 Slow discovery when many router commands are needed due to responseStartMsNIM-21864– High – Aruba - 503H APs are not discoveredNIM-21875– Highest – LDAP broken after 7.3.20 -> 7.5.9 upgrade due to CA certificate reference issueNIM-21883– Highest – vLdap migration 7.3 to 7.5 does not properly migrate the reference to vRolesNIM-21884– High – Wired hosts missing in Inventory → Hosts are being visible in ARP tables.NIM-21887– Highest – IPF 7.5 Emptying dashboard intent verification widget causes frontend crashNIM-21891– Medium – ACI - e2e pathlookup - dropped ethernet header causes loopNIM-21892– Medium – ACI - e2e pathlookup - tunnel packet dropped on spineNIM-21897– Medium – Cisco nx-os mroute task fails on loading dep ipMrouteAllNIM-21904– Highest – Double ACI table match, second one empty, VLAN’s not matching interfaceNIM-21911– High – Dell - parsing errors during PoCNIM-21917– Medium – Azure - Cannot validate instanceViewNIM-21919– Medium – Azure - Cannot map VirtualMachineNIM-21941– Highest – Slow PSQL Spanning Tree Neighbors table
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-21648– Medium – Update IPF Checker with IOPS valuesNIM-21958– Highest – Integrate pre-upgrade check with ipf-checker and use disk check as a gate for upgradeNIM-21963– Highest – Set default Maximum number of loaded snapshots and locked snapshots in 7.5 to same values like in 7.3
Sub-Tasks
Sub-tasks are very well contained work packages, organized under Tasks.
NIM-21766– Medium – Paloalto mapping issue - tasks/mac - Can’t find vlanId for ethernet⅓NIM-21772– Medium – Paloalto mapping issue - preprocess rulebase
7.5.9
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-21313– Medium – siteName column missing from tablesNIM-21407– Highest – Attribute filter does not work for hosts tableNIM-21505– High – AWS Path lookup failing on IPF 7.5 due to some DXGW BGP routes missingNIM-21537– Highest – Can’t configure credential without username on IPF >=7.3NIM-21582– High – Juniper - Login/MOTD Banner supportNIM-21606– High – ACI Path lookup failing onTraffic loop detected.NIM-21617– Highest – ArangoDB data from loaded snapshots remains on disk after 7.3 -> 7.5 upgradeNIM-21619– High – Slow PSQL query log from IPF API contains no timestamp in JSONNIM-21652– High – Arista VXLAN tasks/l2interfaces fail due to vlan interface with id over 4095NIM-21657– High – ArubaCX - LLDP remote interface incorrect, affecting xDP links between AP and switchNIM-21658– Highest – RBAC removed from many endpointsNIM-21676– Medium – MAC Address not formatted correctly on 7.3NIM-21682– High – Read Only user can’t view graphs - Unexpected FailureNIM-21685– Medium – User with insufficient access rights should not see the Backup & Maintenance page menu itemNIM-21696– Medium – Azure VirtualNetworkGateway - omit IPv6 address rangesNIM-21716– Medium – HP IAP - Couldn’t validate client with the IP address: 172.19.22.213, “wirelessInfo.protocol” is requiredNIM-21717– Highest – New getUnscannedPrefixes query takes too long with full IPv4 BGP tableNIM-21724– High – [7.5] - Cisco ACI: APIC model reports % signNIM-21770– High – Vendor API connectivity tester doesn’t work on new snapshot settings pageNIM-21796– Medium – ABParseError: Unknown status code: RNIM-21803– Medium – ABParseError: Problem parsing neighbor on port (1/1/1): “neiIp” contains an invalid value
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-21615– High – Compare 7.3 & 7.5 performance on minimal configurationNIM-21616– High – Compare 7.3 & 7.5 performance on medium configurationNIM-21666– Highest – Update the UI message to notify customers about increased number of loaded snapshotsNIM-21670– Highest – Add analyze total duration metric
Sub-Tasks
Sub-tasks are very well contained work packages, organized under Tasks.
NIM-21763– Medium – Paloalto parsing issue - Error in parsing of application, configuration contains two application sections.NIM-21767– Medium – Paloalto parsing issue - Details for authentication profile dow.tacacs.profile not found
7.5.8
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-9638– Medium – cisco stack - environment information (power supplies and fans)NIM-15077– Highest – AWS TGW - VPC attachment routes refactor (static & propagated)NIM-15229– High – Investigate wrong BGP neighbor information in BGP Neighbors table when devices have same IPs (blocked - pending PSQL query refactor)NIM-20966– Highest – Scanner not working as expected.NIM-21068– High – Inventory - EoL Milestones - Duplicate entries still seenNIM-21071– High – Path Lookup shows incorrect Passing Traffic valueNIM-21173– Highest – Cisco ACI - get correct sPcTag for transparent firewall on ingress leafNIM-21204– High – Mikrotik LLDP-only neighbors missing from xDP tableNIM-21207– Highest – ipf-cli-config -u silently fails in PSQL if there’s already admin userNIM-21209– Medium – New version doesnt fix dot1x indicator, shows as unknown - related to NIM-17875NIM-21286– High – F5OS - command timeoutsNIM-21289– Highest – Upgrade failing on configuration import from 7.3 to 7.5NIM-21290– High – commands/hpe/_arubaIap/portStatusDetail Couldn’t validate AP with the error “speed” must be a numberNIM-21291– Medium – IPv4-mapped IPv6 address not recognized/compared correctly with normal IPv6NIM-21292– High – Some Aruba IAP are missing the interfacesNIM-21295– High – F5OS Documentation BrokenNIM-21296– High – Update F5OS 7.5 Release NotesNIM-21298– Medium – Cisco ACI - PBR evaluation is not executed if ACL policy is already appliedNIM-21299– Medium – Cisco ACI - ACL - add destination mac to BD GW tests + add redirect rules to ACL chain to avoid deny packetNIM-21304– High – Fortigate FW specific context missing all rules on IPFNIM-21311– Medium – ABMapResultError: Error validating WAN link ‘LTE-AVIEW-AWB (155.166.155.163)’ - “interfacesList” must contain at least 1 itemsNIM-21323– Highest – BGP Advertised Routes task is completely broken on IPF 7.3NIM-21327– High – 7.5 Upgrade removed all Saved DiagramsNIM-21329– High – show ip route detail vrfis truncated on CISCO Nexus9000 NIM-21349– Medium – AWS VGW - wrongly loaded dependenciesNIM-21351– Highest – Fortigate - E2EPL FW eval is deny but explicit allow policy is presentNIM-21436– Medium – Unable to save the viewNIM-21441– Highest – Versa routing table missing label - path lookup failingNIM-21455– High – Fix parsing of L2 VXLAN related properties on Juniper QFX switchesNIM-21456– High – Default Policy OTHERS does not allow user to see PathlookupNIM-21457– Highest – Incorrect command to get full vrf routing tables nx-osNIM-21470– Medium – E2E PL - Cisco ACI - failed to load graphNIM-21475– Medium – IPv6 Routing Filtering is brokenNIM-21478– High – Fortinet detected as a router in 7.5.7NIM-21501– Highest – Upgrade 7.3.19 -> 7.5.7 migration fails insert into vLdap null value in column “bindCredentials”NIM-21504– Highest – E2E PL: ACI switching mode instead of routingNIM-21510– Highest – IPF 7.3.19 -> 7.5.7 migrations failed, error with backend-cli-toolsNIM-21512– Highest – Cisco missing routing table vrf commands when BGP threshold is disabledNIM-21514– Medium – UI - wrongly selected filter in expanded filter list after “Save as”NIM-21518– Highest – Manual upgrade failed 7.5.7-> 7.6.1NIM-21537– Highest – Can’t configure credential without username on IPF >=7.3NIM-21575– High – Checkpoint VS rules discovery inconsistent accross multiple snapshotsNIM-21584– High – Failures when exportingSummary of Issuestables to csvNIM-21594– Highest – Slow Tasker discovery PSQL query - setCliJobsAsFoundNIM-21595– Highest – Slow Tasker discovery PSQL query - setErrorIpToReadyNIM-21596– High – Slow Tasker discovery PSQL query - getCliTasksNIM-21608– High – Cannot edit API TokenNIM-21609– Highest – Wrong Policy forprepared-requestsendpointsNIM-21610– Highest – RBAC for/prepared-requests/{preparedRequestId}/executedoes not work at all and only admins can export to CSVNIM-21618– Highest – Missing relationship in BGP neighbors tableNIM-21622– High – [7.5] - Cisco ACI: APIC model reports % sign
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-20248– Medium – Verify 7.5 Upgrade transfers over Vendor API settings (before GA)NIM-20249– Medium – Verify LDAP / AD works after 7.5 Upgrade (before GA)NIM-21058– Highest – E2E Path Lookup - increase the limit for FW rules - currently is set to 4K rulesNIM-21158– Medium – Cisco ACI - evaluate security rules on ingress leaf also for external subnetsNIM-21462– High – Mention performance impact of many loaded snapshotsNIM-21472– Highest – Update defaults and validation for snapshots collection in GUI and API
7.5.7
Epics
Epics are high-level features, that may consist of many tasks.
NIM-20385– Medium – Fix partitions in queries & tables
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-19829– Medium – API tasks/sn wasn’t seen in error tableNIM-20099– High – SyslogWorker removing devices from discovery historyNIM-20506– Highest – Service graph -> ACI always denyNIM-20532– Highest – Cisco ACI - ServiceGraphs - wrongly not matched ruleNIM-20833– High – Mikrotik - missing SNMP data for all devicesNIM-20834– High – Mikrotik - missing NTP dataNIM-20900– High – PE router is missing routing+MPLS dataNIM-20909– Medium – IPF 7.5 Frontend cache flushingNIM-20920– Highest – Updater reaches heap allocation limit while loading snapshot with full BGP tablesNIM-20963– Medium – neighbors/unidirectional API table is very slow (502)NIM-20964– Medium – Azure API client returns nullNIM-20972– Highest – Saved Path Check API not working as expectedNIM-20997– Medium – Junos interfaces in the IPF GUI show the speed type as “fixed”, but the interfaces have auto-negotiation enabled.NIM-21027– High – Huawei tasks/deviceConfig/startup ABTaskMapResultError - Saved config consistency not workingNIM-21032– Medium – Azure - tasks/routingTable - Cannot read properties of undefined (reading ‘type’)NIM-21040– Medium – Azure - DROP: routing loop detectedNIM-21053– Highest – Scan worker stuck - doesn’t get to Init event received, startingNIM-21059– Highest – Configuration import does not overwrite the discovery settingsNIM-21067– Medium – ABMapResultError: undefined is not a functionNIM-21070– Medium – Path lookup user defined first hop, interface dropdown requires clicking away from hostnameNIM-21074– Highest – Scan worker exiting with code 246 upon discovery finishNIM-21097– Medium – Azure - static routes to IPSEC (VNET2VNET) creates loopNIM-21099– Medium – Azure - duplicate routes created for ER circuitNIM-21144– High – Cisco ACI - NX-OS routes missing due to negative timestampNIM-21155– Medium – Azure VirtualNetworkGateway - Cannot read properties of undefined (reading ‘toLowerCase’) bugfixNIM-21175– High – Interface original name missing for EXOS devicesNIM-21182– High – ISIS - Huawei parsing issueNIM-21191– High – Not converted, deprecated AQL API Table VDC/Devices not removed in 7.5NIM-21194– Medium – Wrong feature flag used in ipf-migrate postinst fileNIM-21208– High – PSQL techsupport contains vUser - doesn’t play nice with ipf-cli-configNIM-21284– High – Routing table on Arista doesn’t workNIM-21294– High – PSQL Inventory - Sites table query is very slow with 100 loaded snapshots
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-15736– Low – Create CLI interface for the appliance upgrade serviceNIM-19653– Medium – eVlanRouted not created for trunk interfaces without vlanIdNIM-20490– High – Saved filters with unsupported cross-column operators should present a warningNIM-20951– Medium – Azure - normalize resource IDs to lowercaseNIM-20956– High – Get all e2e path tests passing on 7.3 & 7.5 branchesNIM-21026– High – Check discovery code for bluebird Promise.map() usageNIM-21079– High – reconstructVersaMplsTable slow on f4a40e4b-bf47-40bf-82ee-f48d1a8ad8a6 snapshotNIM-21080– High – createELinksFromStp slow on f4a40e4b-bf47-40bf-82ee-f48d1a8ad8a6 snapshotNIM-21085– Medium – Investigate Arango removal inintegrations/postmanNIM-21088– Medium – Investigate Arango removal innae/callhome-testNIM-21168– Medium – Use _ci in model calls in the calcSyntaxSearch finish job
7.5.5
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-19271– Medium – Cisco APIC - Platform/Model/Memory utilization is missing/not collectedNIM-19859– Highest – worker@1 heap out of memory during Versa discoveryNIM-19971– Medium – IPF Displays Incorrect Memory Utilization for FortiSwitch DevicesNIM-20034– High – eos errors for commands/arista/_eos/ipRouteVrf and commands/arista/_eos/ipRouteNIM-20095– Highest – Discovery syslogworker configuration backup - performance logger does not logNIM-20134– Medium – ABParseError: Unexpected row: access-group OUTSIDE_access_in in interface OUTSIDE per-user-overrideNIM-20172– High – End to end path tracing not finding the right ACL on Cisco ASANIM-20178– Medium – ABTaskMapResultError: Unable to find localAddress for pimInt: Tu16NIM-20318– Medium – ABTaskMapResultError: “value” does not match any of the allowed typesNIM-20377– High – PaloAlto - login problemNIM-20445– Medium – “Database dump without devices data” option fails in TechSupport (PSQL)NIM-20529– High – IPF 7.2+ upgrade should fix broken PSQL during upgradeNIM-20530– High – Cisco WLC failing on “SSH client has not received any data for the last 300000 ms! cmd => show client summary”NIM-20563– Medium – Missing VLAN ID in IPV4 Managed IPv4 addresses - JuniperNIM-20835– High – “Can’t log. The requested logger is not set yet”NIM-20844– Highest –/tables/platforms/vdc/devicesNot properly deprecated - Not in any Release NotesNIM-20846– Highest – Azure - Can’t log. The requested logger is not set yetNIM-20848– High – Worker logs for task or command finished doesn’t include enough information for Azure Vendor APINIM-20854– High – Silverpeak - 403 errors on API calls when RBAC rule is appliedNIM-20868– Lowest – Link to #Groups from PIM Boostrap RP mappings is not workingNIM-20884– Medium – Migration to 7.5.3 failed - No user with admin role is presented in the configuration fileNIM-20887– Highest – IPF Discovery is completely stuck due the AWS devicesNIM-20891– High – Mikrotik - Wrong device serial numberNIM-20895– High – IPF 7.3 & 7.5 - Configuration Management diff doesn’t consider SN+hash but only hashNIM-20921– High – Arista EOS - Backup next-hop is (incorrectly) used in Path LookupsNIM-20926– Highest – Shaper related networking issuesNIM-20928– Medium – Fix SQL JOIN in /technology/security/lsvpn/satellitesNIM-20931– High – Failed multicast pathlookupNIM-20932– Medium – Unable to save API endpoint policy in 7.5NIM-20933– High – TS upgrade testing: failed 7.5.0-26 updateVCollectMetaFromDb.ts Arango migrationNIM-20944– Medium – Azure ER Circuit ARP - Error: Cannot read properties of null (reading ‘value’)NIM-20949– High – Vendors API settings import to postgres doesn’t workNIM-20953– High – Long time getting snapshot logsNIM-20960– Highest – Azure Discovery - hubRouteTables command causing slownessNIM-20976– Highest – Duplicated rule chains (NAT44)NIM-20982– High – Configuration import doesn’t work on 7.5 if file is exported on lower versionsNIM-20988– Medium – Azure - member state is unknown but availability is upNIM-20989– Medium – Cisco stack switch showing part number description as c36xx Stack instead Switch 1 in inventory/part-numbersNIM-20993– High – ArangoImport during snapshot load in PG modeNIM-20995– Medium – Fix broken filtering integration testsNIM-21002– High – API clients to not destroy on a data request’s Authorization errorNIM-21015– High – BGP Advertised Routes still failingNIM-21037– Medium – getFhrpGroupMembersTable - MISMATCHED objects with same itemId
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-19050– Medium – 10 - Moderate - Broken Access ControlsNIM-20231– Medium – Relculate intent checks after import is successfulNIM-20350– Low – Fix failing tests for table management/snmp/communities (valid)NIM-20356– Low – Fix failing tests for table settings/ports (valid)NIM-20386– Medium – Fix partitions for calcFromApClientsWhichAreNotInArpNIM-20389– Medium – Fix partitions for getDeviceAttributeValuesNIM-20395– Medium – Fix partitions for getMplsL2VpnPseudowiresTableNIM-20396– Medium – Fix partitions for getPlatformsClusterSrxTableNIM-20397– Medium – Fix partitions for getRoutingProtocolsOspfNeighborsTableNIM-20400– Medium – Fix partitions for getSpanningTreeInconsistenciesMultipleStpTableNIM-20401– Medium – Fix partitions for getSpanningTreeInconsistenciesNeighborPortsVlanMismatchTableNIM-20402– Medium – Fix partitions for getSpanningTreePortsTableNIM-20404– Medium – Fix partitions for getWirelessClientsTableNIM-20405– Medium – Fix partitions for reconstructAwsDxgwRouteTableNIM-20406– Medium – Fix partitions for removeVdcInventoryNIM-20407– Medium – Fix partitions for setErrorIpToReadyNIM-20408– Medium – Fix partitions for setMacAddressesFromParentInterfacesNIM-20409– Medium – Fix partitions for updateFabricpathNIM-20502– High – Table /wireless/access-points is very slowNIM-20957– Medium – Cisco ACI - change mapping of any group from range to trivial trueNIM-20970– Medium – Optimize the StartLimit of discovery servicesNIM-20984– High – Do not mask AWS assume role
7.5.4
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-19580– Highest – Discovery delayed/stuck between onDone start and finishNIM-19793– Medium – Cisco N9Ks modules not in “Platforms -> Environment -> Modules” tableNIM-19818– High – Cisco - Catalyst 9K missing modulesNIM-20181– High – Transceivers not correctly discovered for VSS CISCO IOS platformNIM-20469– Highest – Fortigate interface/managed IPs not being populated/parsedNIM-20470– High – Juniper - L2Circuit parsing issueNIM-20515– Medium – Release Testing - Data consistency - License summary endpointNIM-20516– High – Release Testing - Data consistency - BGP Advertised routes - missing all dataNIM-20517– Medium – Release Testing - Data consistency - AWS Vendor inventory - resource type modifiedNIM-20551– Medium – ipf-system-upgrade possible race condition with upgrade-status.jsonNIM-20827– Medium – ACI - security evaluation - expand BD’s pcTags to IP rangesNIM-20849– Highest – Azure tasks/routingTable mapping duration too long, blocking event loop and stuck discoveryNIM-20850– Highest – Azure expressRouteCircuits commands - lock could not be acquired for 3620000 millis, stuck discoveryNIM-20861– High – 7.5.3 - Manual Site Separation not workingNIM-20863– High – after Upgrade to 7.5.3 - unable to load snapshotNIM-20867– Medium – broken DHCP Server Summary table linksNIM-20871– High – Slow updateNonDupliticItemsInArp queryNIM-20875– Medium – 7.2->7.3.15->7.5.3 - Failed to run ipf-migrate migrations.NIM-20879– Medium – Upgrade 7.3.15 → 7.5.3 failed with “invalid input syntax for type bigint” when inserting into vLdapNIM-20883– Medium – Upgrade from 7.3-> 7.5.3. network calculations errorNIM-20899– High – Fix commas in optional columns in PSQL (if-def) in /inventory/devices/vendorsNIM-20938– Medium – Fix failing PSQL API test for /tables/security/nat44NIM-20946– Medium – TS upgrade testing: error: insert into “vReport”
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-19771– Medium – Arango - PSQL Regex DiscrepancyNIM-20165– High – Test Upgrade Process on realistic data [before GA]NIM-20347– Medium – Fix failing test for table /jobs (valid)NIM-20353– Medium – Fix failing tests for table security/acl/index (valid)NIM-20358– Low – Fix failing tests for table spanningTree/inconsistencies/portsMultipleNeighbors (valid)NIM-20371– High – Stop licensing lightweight wireless AP controllers [7.3, 7.5, 7.6]NIM-20388– High – Fix partitions for getCachedGraphNodesNIM-20391– High – Fix partitions for getEdgesIntoOpenPathsNIM-20392– High – Fix partitions for getEdgesOutOfNodesNIM-20399– High – Fix partitions for getSnapshotDevicesTableNIM-20403– High – Fix partitions for getStpEdgesNIM-20542– High – Optimize query getEVlanWithCdpNIM-20828– Medium – Upgrade pre-check should check available size on the root filesystem
7.5.3
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-20415– Highest – Attempting to send command ‘’ through a non-established session NIM-20514– High – Can’t see current logs on 7.5NIM-20522– High – 7.5.1 - slowness: snapshotLoad, reportNIM-20536– Medium – 7.5 OAS has no VersionNIM-20537– Highest – Breaking changes intables/jobsNIM-20567– Medium – Columns removed intables/settings/api-tokensoutside major releaseNIM-20852– Highest – 7.5.2 - migration failed from 7.3.15NIM-20857– Medium – Upgrade from 7.3.15 -> 7.5.2 Failed on arango:upNIM-20860– Medium – Release Testing - UI issue - Unexpected failure when sorting columsNIM-20878– High – 7.5.2 - licenses - cisco-smart-license – Something went wrong
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-20357– Medium – Fix failing tests for table spanningTree/bridges (valid)NIM-20394– Medium – Fix partitions for getManagementLoggingSummaryTableNIM-20838– Medium – Fortigate Execute tasks/pbr just for masterUnit
7.5.2
Stories
Stories are high-level features, that may consist of many tasks. These would typically cover extensive functionality in IP Fabric
NIM-16952– Medium – Make ScanWorker follow the RFC0014
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-19414– High – AWS discovery - is not a valid target group ARN error slowing down discoveryNIM-19704– Medium – Validate arangod.conf is symlinked prior to upgradeNIM-19945– Medium – Try to fix file displacements afterseddriven developmentNIM-20011– High – E2E Path Lookup - path ends up in transit instead of firewallNIM-20041– High – Jumphosts are not creating the explicit.logfiles, journald has all the logsNIM-20265– High – Loopback interface is not populated in MANAGED IP table within GUI - hpe arubaswNIM-20446– Medium – IPF 7.5.1 - migrations failed upon upgrading from 7.3.14 - vGraphDefaultLayout vUserIdNIM-20457– Medium – IPF 7.5.1 - can’t create manual snapshot after opening snapshot settings - seedList: “seedList” must be an arrayNIM-20465– Medium – View URL change filters from column filters to advanced filterNIM-20467– Highest – Scan worker - credentials list is empty even though it shouldn’t beNIM-20468– Medium – IOS-XR - all ipv6 routes are obtained even if community filtering is enabledNIM-20473– Highest – IPF 7.5.1 - migration failed, eUserHasRolesNIM-20478– Highest – Update from 7.3.15 -> 7.5.1 fails with database migration issuesNIM-20497– Medium – Validation error when adding a device to an existing snapshotNIM-20501– Medium – Changed payload of POST /settings/credentials in non-breaking releaseNIM-20510– High – Failing BGP Advertised Routes task on nx-osNIM-20518– Medium – Journal logs starting from the last boot are part of the Techsupport fileNIM-20523– Medium – UsePre-Dependsfor postgresql, to ensure it is ready for packagesNIM-20550– High – ipf-migrate postinst failed on demo1.us.ipfabric.ioNIM-20564– Medium – Fortigate - global cache in preprocess task use sn without suffix
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-19341– Medium – Support rollback of configuration import in case of an errorNIM-20346– Medium – Fix failing test for table interfaces/connectivityMatrix/index (valid)NIM-20360– Medium – Fix failing tests for table vrf/summary (valid)NIM-20361– Medium – Fix failing tests for table vxlan/peers (valid)NIM-20363– Medium – Fix failing tests for table snapshotAttributes (valid)NIM-20364– Medium – Fix failing tests for table snapshotDevices (valid)NIM-20552– Medium – Remove deprecated flag from loginIp fields
7.5.1
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-19007– Highest – PATCH/settings/credentials/{id}does not allow for changing username/passwordNIM-19816– Medium – Device Credentials - unable to save settings - credentials[0].notes must be a stringNIM-19835– Medium – Wizard - configured credentials can be lost during processNIM-19916– Medium – IPSubnetInput component does not return validation errorNIM-19933– High – Introduce Arango migration to remove duplicates in sysDevInventoryNIM-19942– Medium – GUI error after deleting dashboardNIM-19952– Medium – Advanced CLI options - Basic failure should allow a value of Zero.NIM-19996– Medium – Technology-SDN-APIC-applications - unexpected failureNIM-19998– Medium – CSV download with intent filter returns empty resultNIM-20004– Medium – Failing test for multicast/routes/countersNIM-20035– High – PaloAlto Discovery issues - XML tags displayedNIM-20051– Medium – When I choose “array column” -> “any item” -> “is empty” in Advanced filter, value field disappearsNIM-20057– Highest – Appliance is not properly installableNIM-20059– High – Missing dashboard config on upgrade - Import / export removes all vReportGroup recordsNIM-20063– Medium – Version fetcher never clears version.json when there’s no internet accessNIM-20110– High – BGP community filtering for ipv6 not following flowchartNIM-20112– Medium – all.txt and error.txt logs not removed for scanworkerNIM-20113– Medium – Authentication failure not able to be set to 0NIM-20157– Highest – Upgrade 7.3 -> 7.5 failed - config import errors on dashboard.rows undefinedNIM-20160– Medium – Cisco ASA - ACL - can’t get IP addreess for inteface with IPv6 addressNIM-20173– High – Snapshot selection does not reload dataNIM-20174– Medium – Mist APs are missing the API slug in the Inventory -> Devices tableNIM-20182– Medium – Fortigate - contexts are not discovered if others were previouslyDiscoveredNIM-20206– High – Basic failure not able to be set to 0NIM-20214– High – Extreme VOSS - running configuration not in CLI Logs due to wrong commandNIM-20218– Medium – PSQL Network analysis report not working properlyNIM-20222– Medium – Discovery is not able to complete with the VeloCloud API — it has to be stopped manually after 64 hours.NIM-20223– Medium – Error message during copying URL of the viewNIM-20225– Medium – Impossible to import Arango -> Arango configuration due to unrecognized table-data importerNIM-20244– Highest – Config import fails to import graph viewsNIM-20266– Medium – Resolve deadlocks in Postgres manual site separationNIM-20268– Medium – Device details tab shows No data availableNIM-20271– Medium – Unable to modify settings of existing credentialsNIM-20278– Medium – IPSubnetInput component allows to add the same IPv6 address/network represented by expanded and shortened formNIM-20281– Highest – Cloud (Meraki) managed catalyst switches not being discoveredNIM-20283– Medium – IPF 7.3.13 - reference to net-shaping-newshape.sh in /etc/network/interfaces causes no DNS resolutionNIM-20337– Medium – “Untitled” still appears in name of force stopped snapshotNIM-20370– Medium – Upgrade portal stuck after empty file uploaded and GPG verification failureNIM-20458– Highest – Fatal Error Discovery Palo Device 10.64.128.21NIM-20459– Highest – Query getMacAqlTagOnRouter got stuckNIM-20477– Highest – 7.5.1 - Security > ACL – /v7/tables/security/acl failed to fetch, HTTP status: 504NIM-20480– High – 7.5.1 - loading snapshot failed: Error: insert into “vSecuritySyntaxSearch”
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-19076– Medium – Missing items from Config ExportNIM-19220– High – Add IPv6 information into feature matrixNIM-19772– Highest – Extend import/export scope to cover more configuration related dataNIM-19785– High – Make IPSubnetInput trigger leave dialog from error stateNIM-19950– High – Test performance with ~100 snapshots loaded (before GA)NIM-20145– Highest – Aruba IAP - Revert logic to 6.9 for Aruba central managed APs
7.5.0
Epics
Epics are high-level features, that may consist of many tasks.
NIM-9556– Medium – Role-based access control (RBAC) - Phase 3NIM-10927– High – API convert all tables endpoints from AQL to PSQLNIM-12678– High – API convert e2e queries to PSQL (pathlookup)NIM-12702– Medium – API convert controllers to PSQLNIM-15669– Highest – Arango -> PSQL Upgrade Process [7.5]NIM-15816– High – Fix queries failing testsNIM-16494– High – Prepare for PSQL stable releaseNIM-17027– High – Transparent FWNIM-17374– Medium – Discovery improvements [7.5]NIM-17401– High – Support for IPv6 in GUINIM-17744– Medium – OAS ImprovementsNIM-17950– High – Implement PostgresTaskerSetEdgeAzureExpressRouteDataProvider data provider [7.5]NIM-18154– Medium – Create an API client generated from OAS to improve type consistencyNIM-18450– High – Extensions – securityNIM-18629– Highest – Follow up on AQL/PSQL queriesNIM-18696– High – Add support for Multi-Segment/tenant SD-WAN routing 7.5NIM-18856– High – Add support for F5OS - basic vendor discovery of chassis information [7.5]NIM-18869– Medium – Discover Cisco 9300 switches running in cloud-native mode via Meraki APINIM-18897– Medium – Cloud scaling groups [7.5]NIM-18984– Medium – Cloud subnets discovery 7.8NIM-19003– Medium – v6 support for BGP Advertised Routing taskNIM-19078– Medium – Syslogworker improvementsNIM-19087– High – Fix PSQL Pathlookup Failing TestsNIM-19114– Medium – Viptela - Collect Device ConfigurationNIM-19147– High – Config Backup over IPv6NIM-19162– High – Extensions - bugsNIM-19254– High – Configuration import/export [7.5]NIM-19381– Medium – Utilize Chromatic for automated visual testing of Storybook libraryNIM-19393– Medium – Cisco Meraki - Path lookup improvements - research [7.5]NIM-19397– High – PSQL - Fix partition selection in API TablesNIM-19425– Medium – AWS NAT gateway NAT44NIM-19427– High – Update Table component according to UX proposalNIM-19548– Medium – PSQL - Fix partition selection in e2e path lookup queriesNIM-19949– Medium – PSQL Correctness & Performance Testing [GA]
Bugs
Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.
NIM-11920– Lowest – Wrong categorization for /tables/rolesNIM-12470– Highest – AWS security group isn’t evaluated for paths from transit gatewayNIM-15912– Medium – Static NAT - Path lookup issue - Juniper vSRXNIM-16111– Highest – Configuration backup might not working as expected [git repo archive from customer]NIM-16392– Highest – Saving graph nodes (wired hosts) - Collection vGraphNode - save failedNIM-16547– High – APIC data are not mapped to large controllersNIM-17022– Highest – Worker restart and stuck discovery due to Invalid string length errorNIM-17179– Medium – Brocade - diagram inconsistencyNIM-17362– Highest – Incorrect $last Snapshot ReferenceNIM-17364– Medium – New IPv4 Managed IP Summary does not use Attribute FiltersNIM-17872– High – Pan-OS field negation does not show on the IPF GUINIM-17966– High – Inventory tab does not contain devices being discovered [spike]NIM-18084– High – Path lookup shows strange drops - v7.0.13NIM-18088– High – Review Versa VOS Feature MatrixNIM-18131– Medium – Aruba CX - Wrong remote interface in XDP neighbor tableNIM-18133– Medium – Aruba IAP - no xdpIdList in vDevice, no L1 links seen in diagram for those APsNIM-18147– High – Some IP Phones not detected as such via CDP/LLDPNIM-18204– Medium – Juniper - VXLAN doesn’t work for 23.4R2 as expectedNIM-18349– High – BGP Current State Time is incorrect on NX-OSNIM-18381– Medium – Viptela - exclude duplicate IPs from cli discoveryNIM-18431– High – CLI credentials are required for discoveryNIM-18449– Medium – Deprecated Table Tags were not removed in OASNIM-18494– Medium – Error during CLI msg processing - Map maximum size exceededNIM-18509– Medium – slow discovery - ompRoutesReceivedPrefixRequestLimit not respectedNIM-18525– High – Slow queries on Silverpeak-Overlay causes failed discovery and Overlay table can’t be loadedNIM-18555– Medium – Missingget log fortianalyzer settingcommand from matrixNIM-18590– Highest – ACI E2E path is showing an incorrect ACL packet dropNIM-18601– High – Table simple filter - last value is not used when submitted fast twiceNIM-18603– Medium – PSQL - slow report calculation, increasing over timeNIM-18609– Medium – Floating list component has no vertical offsetNIM-18611– Medium – FRR - Recursive route is being used as next hopNIM-18637– Medium – Extensions - When the wrong file is selected, it emits weird errorNIM-18646– Medium – Discovery history table data mismatch between Arango and PGNIM-18674– High – Checkpoint Gaia OS -> Parsing error :Text still has unparsed interesting sections: mode.NIM-18684– Medium – Menu to Logout doesn’t look right when long usernameNIM-18685– Medium – Data model inconsistency in getNeighborsIpv4 (arangoTaskerVoidRoutingProtocolAssignDataProvider)NIM-18687– Medium – Diagram Labels “Show each value on a new line” does not workNIM-18692– Medium – Device Credentials tab shows warning icon with no obvious reasonNIM-18697– Highest – Path lookup crash while working with FWs with 6K rulesNIM-18719– High – Export to VSDX fails with collapsed nodesNIM-18742– Highest – ipf-cli-config -u does not allow resetting admin passwordNIM-18743– Medium – Diagram Tables - can’t download CSVsNIM-18744– Medium – Callhome-bugfix: hp 7.0.0-48 commands/hp/_arubasw/cdpNeiDetailNIM-18748– Medium – Callhome-bugfix: azure 7.2.0-28 commands/azure/applicationGatewaysNIM-18820– Highest –appliance-buildercalling wrong port on pre-upgrade checkNIM-18823– Medium – Cannot rediscover from connectivity reportNIM-18824– High – 3Com/HP OS version check failingNIM-18825– Medium – Viptela BFD Summary Table title is wrongNIM-18832– High – Can’t add device when device credentials are missingNIM-18835– Medium – Configuration import job throws undefined errorNIM-18837– Medium – HP Aruba - Missing vlan ID to create an interface for VLAN: JP102/UAData/10.2…!NIM-18844– Highest – Stopping snapshot discovery throws an errorNIM-18846– High – Pagination does not reset on simple filter searchNIM-18848– High – Technology > Networks tables were removed but Intent Rules were not deleted.NIM-18849– Medium – Global settings can override device credentials from global settingsNIM-18855– High – Add support for Aruba AOS-10 Instant Access APNIM-18857– Medium – OSPF v3 Neighbors table shows (not displayable object) in Local Address columnNIM-18874– Medium – Missing IP addresses in Connectivity ReportNIM-18880– Medium – Alcatel Interface Parsing Link Aggregation StatusNIM-18881– Medium – Device explorer > Interfaces is not filteredNIM-18883– Medium – Palo Alto Interface Parsing Status - UnknownNIM-18886– Highest – Failing discovery on too many resumesNIM-18901– Highest – Built-inreadpolicy includes dangerous write actionsNIM-18911– Medium – H3C leads into “Couldn’t parse any info from the input text.”NIM-18913– Medium – IPF 7.2 Extension security breaks extension websocketNIM-18914– Medium – Callhome-bugfix: cisco 6.9.0-12 commands/cisco/_meraki/v1/devices/lldpCdpNIM-18919– Medium – Configuration Export/Import tagged incorrectly in OASNIM-18927– Medium – Support Matrix incorrectly shows vendors do not support license taskNIM-18935– High – Extra filter being sent without any values for interfacesNIM-18938– Medium – PSQL: SNMP settings stores configurations data after disabling what makes glitches in enabling other versionsNIM-18939– Medium – Intent result design on empty cell in Edges column of Inventory->Hosts is brokenNIM-18940– Highest – Configuration Management download doesn’t consider SN but only hashNIM-18945– Medium – Multi-select dropdown missing top border highlight on focus stateNIM-18955– Medium – Path Lookup - Advanced Packet Options always shown as customNIM-18956– High – Viptela - NTP SYNC status not parsed properlyNIM-18961– Medium – “BIG-IP F5 R-Series / Tenant – Model & Platform fields missing after discovery”NIM-18964– Highest – Slow query - missing index on BGP Advertised Routes tableNIM-18965– High – Discovery Forcepoint client is missing await in post()NIM-18986– Medium – Extensions: privilege escalation, wrong extensions served on URLNIM-18989– Medium – Callhome-bugfix: cisco 7.0.0-48 commands/cisco/_meraki/v1/networks/clientsNIM-18990– Medium – Callhome-bugfix: cisco 7.0.0-48 commands/cisco/_meraki/v1/devices/switch/portsNIM-18992– Medium – Search for “PE” emits duplicate React key errorNIM-18997– Medium – Missing error message in SNMP form when IP address is missingNIM-19001– Medium – Filter fires two requests on each filtering in Device explorerNIM-19002– Highest – Combined discovery - remove excluded IP addresses fromLogin IPlistNIM-19005– Medium – Missing L1 & L2 Neighbors for ArubaCXNIM-19008– High – Cannot update Credential UsernamesNIM-19009– High – Discovery Seeds Error message is confusingNIM-19010– Medium – Intent Rule Menu not being displayed in Saved Config Consistency TableNIM-19016– Medium – Incorrectrel-mainappliance API version instead v7.4 it is v8.0NIM-19018– Highest – Restoral of a backup isn’t waiting for syslogWorker to fully stopNIM-19019– High – [backend]Update manual links from global settings does not work in new snapshot settingsNIM-19020– Low – Saved Config Consistency page wrongly handles missing snapshotNIM-19022– Medium – Unable to upgrade to 7.3.1NIM-19024– Medium – Some of the dropdown do not work as expected when focused with TabNIM-19026– Medium – Config sanitization replaces only last octet of IPv4 in CIDR as<IPv6 prefix>NIM-19030– Medium – Permissions required page style lacks margins/paddingNIM-19031– High – Unable to create/save policy with all endpoints selectedNIM-19032– Highest – Importing settings exported from arango into postgres failsNIM-19033– Medium – No visible feedback when trying to generate a CSR in the UI (settings) while lacking permissionsNIM-19034– High – Slow parsing of commands/cisco/ipv6NeighborsVrf causing rabbit disconnect/reconnect for the workerNIM-19064– Medium – Azure - add IP type check to isPrefixLearnedFromMSEE functionNIM-19068– Highest – Slow calcVirtualMachineDevices queryNIM-19070– Highest – Slow calcVirtualMachineInterfaces queryNIM-19072– Highest – Mist worker job preventing Discovery completionNIM-19073– Medium – [frontend] Duplicate device informationNIM-19075– Medium – Breaking postgres changes found intables/management/snapshotsNIM-19082– Medium – Intent check filter has egg-shaped circlesNIM-19086– Medium – Investigate Slow Discovery due to Wireless queriesNIM-19091– Highest – Cisco 9300 - Routing information not displayedNIM-19093– Medium – Wrong VRF simple filter in device explorerNIM-19094– High – Cisco IOS-XE WLC support does not recognise CW9800 Wireless ControllersNIM-19095– Medium – Breaking Changes in GET/tables/*in PostgresNIM-19099– Low –security schema sandboxpage has broken layout in component galleryNIM-19105– High – Meraki API -400errors being received / displayed, including “pagination” errors.NIM-19119– Low – Combined discovery - Viptela - error that shouldn’t be thereNIM-19129– Medium – theexampleparam formarshmallowfield is not supported in version 4NIM-19132– Medium – Fix upgrade script non-zero exit on successfull upgradeNIM-19134– High – [PSQL] IPv6 Searching needs to accept full and double colon formatsNIM-19135– Highest – [PSQL] Upsert of vUrl does not store_keyproperlyNIM-19138– Medium – Zone firewall table, can’t filter for empty from/to zone or match in/out interfacesNIM-19140– Medium – ABNoConfig: Couldn’t get platform/model for cisco (asa), ValidationError: “model” is requiredNIM-19142– Highest – The E2E path lookup displays many unnecessary paths leading to incorrect destinations.NIM-19143– High – Alcatel Omniswitch STP mode shows incorrectlyNIM-19144– Highest – Disabled Wireless - Lan List task makes settings impossible to save on IPF >7.0NIM-19153– Medium – ABParseError: Not valid rule in ACL aclProtVlan03: ABParseError: Unknown combination of port netbios and protocol udpNIM-19159– Medium – Missing progress indication for Override with global settingsNIM-19170– Medium – Different views between Arango and PSQL with ipf-gui roleNIM-19174– High – Investigate failing backend API tests on PostgresNIM-19175– Medium – BGP Community list tooltip offers semicolon as separatorNIM-19179– High – [PSQL] RBAC test failingNIM-19182– High – Front-end layout problems on validation in Configuration wizardNIM-19190– Medium – FortiGate sdwan commands fail in specific FOS versionsNIM-19199– Medium – Cisco C1000 processor wrong parsingNIM-19201– Medium – Discovery cannot be started with just device credentialsNIM-19215– Medium – ABTaskMapResultError: Cannot read properties of undefined (reading ‘some’)NIM-19216– Medium – Support Matrix incorrectly shows Arista and IOS-XR does not support Configuration SavedNIM-19232– Highest – appliance image has broken systemd unit dependencies, local-fs.target not reachedNIM-19243– High – Path simulation - Inconsistent data - unknown is not supportedNIM-19249– Highest – IOS-XR segment routing parsing issueNIM-19252– Medium – Duplicate IPSec gateway entriesNIM-19253– Medium – Attributes scopes not exported as part of the appliance configurationNIM-19259– Medium – Import/Export not working properly on linked collectionsNIM-19261– Medium – After import of users, extensions do not have an ownerNIM-19262– Medium – Extreme VOSS - Can’t get OS versionNIM-19263– Medium – After successful import appliance hallucinates for the userNIM-19267– Medium – IPF 7.2.11 - cannot export configurationNIM-19270– High – VeloCloud routes not being mapped/parsedNIM-19272– Medium – Old storybook is brokenNIM-19274– Medium – xDP neighbor incorrect on Meraki switchesNIM-19276– Medium – Citrix ADC - Platform and model missingNIM-19277– Highest – Fortigate commands failing with error Command fail. Return code -61NIM-19305– Medium – Missing Seeds from Discovery HistoryNIM-19313– Medium – Azure - NIC ACL is not being evaluatedNIM-19329– Medium –ipf-sso-setup-helperproducess in-valid yamlNIM-19330– Highest – Site low lovel design report having errorsNIM-19331– Medium – Credentials not persisted in syslogworkerNIM-19337– Medium – Dropdown component doesn’t fill selected option until click away is performedNIM-19343– Medium – Callhome-bugfix: cisco 7.2.0-32 commands/cisco/bgp/allNeighborsNIM-19344– High – Extensions not accessible in PSQL mode due to missing nginx configNIM-19358– Medium – Editing a user with no roles assigned crashes the UINIM-19363– Medium – PSQL - Manual link tab is not visibleNIM-19365– Medium – PSQL pathlookup intent checks are not workingNIM-19366– Medium – Callhome-bugfix: vmware 7.0.0-48 commands/vmware/velocloud/edge/getEdgeConfigurationModulesNIM-19369– High – Opengear OM/ACM config management doesn’t work - Hostname task isn’t configured for versionNIM-19374– Medium – Add global attribute throws error when no snapshot is loadedNIM-19376– Medium – ABParseError: Problem parsing VRRP group: “state” must be one of [master, backup, init]NIM-19377– Medium – Callhome-bugfix: extreme 7.0.0-48 commands/extreme/_voss/ipInterfaceNIM-19378– Medium – ABParseError: Cannot parse or validate “Tengi-SSR-Site”: ValidationError: “dpd” is requiredNIM-19379– Medium – ABParseError: Error in parsing webfilter profile Corpo Internet: [NIM-19380– Medium – Callhome-bugfix: extreme 7.0.0-48 commands/extreme/_exos/portsMgmtNIM-19384– Medium – ABTaskMapResultError: “[0].intL3Name” is requiredNIM-19385– Medium – ABParseError: “memoryTotalBytes” is requiredNIM-19386– Medium – ABParseError: “outPkts” is requiredNIM-19387– Medium – ABParseError: Couldn’t validate wlan with id 8, Unknown MAC address format “N”NIM-19388– Medium – Mikrotik - backup/not active routes affecting path lookupNIM-19392– High – PSQL - Device Attributes tab does nothingNIM-19400– High – Meraki STP and MAC are not processed after switching to PSQLNIM-19403– Medium – Invalid typing / unknown behaviour in table column filter supportNIM-19411– Medium – ABMapResultError: IPF-INFO: API data invalid! “[0].mdnsName” is not allowed to be emptyNIM-19413– Medium – AWS - Security token expired during discoveryNIM-19428– Medium – commands/aws/elb/describeTargetGroups mapping failure - ipAddressType is requiredNIM-19433– Medium – PSQL - Slow pathlookupNIM-19434– Medium – epoch_now returns secondsNIM-19443– Medium – AWS VPC Error - Main routing table not foundNIM-19444– Medium – AWS ELB NAT44 result mapping failure - “test” must be one of [object]NIM-19446– Medium – IOS-XR segment routing - No nexthops found for undefinedNIM-19448– Medium – ABParseError: “name” is requiredNIM-19450– Medium – ABParseError: Cannot parse active image!NIM-19460– Highest – scanWorker Allocation failed - JavaScript heap out of memoryNIM-19467– High – [backend] Add Manual Links to Export/ImportNIM-19468– High – Path simulation over ACI - matching Deny Any for permitted trafficNIM-19471– Medium – Azure - use lowercase when searching for subnetPrefix & routeTableNIM-19473– Medium – Add pagination support for backup command in cisco/routingTableNIM-19476– Highest – Deleting a Path Verification removes different row than where delete was clickedNIM-19483– Medium – Unexpected null in Rule.test in zone firewall ofL71FW9/rootNIM-19490– Medium – IPF is not able to discover endpoints in vNet vn-prod_wvd-use2-01NIM-19491– Medium – Azure - Cannot map the Load Balancer “ilb-tfe_web-dev-uscn”: ValidationError: “probeList[0].requestPath” is not allowedNIM-19494– Highest – scanWorker creates massive log outputs and includes sensitive informationNIM-19495– High – PANOS - parsing problemNIM-19498– Medium – Selecting Operating System policies gives inconsistent views between 7.3 and 7.4NIM-19501– Medium – Cannot persist BGP CommunitiesNIM-19502– Medium – Wrong error message when adding duplicate OUI entryNIM-19508– Medium – syslogWorker logs are placed in syslog file and also contain sensitive informationNIM-19510– Medium – API responds with 500 error code when applying filter in Login IPv6 column in Manual Site Separation TableNIM-19512– Medium – Number of devices not updated after deleting a deviceNIM-19517– Medium – DB deadlock during loading of multiple snapshotsNIM-19519– Medium – Extension URL returns 500 after removalNIM-19522– Medium – Error: Couldn’t validate neighbor 10.140.254.10, “bdr” is requiredNIM-19526– Medium – PL/PSQL function get_data_directory will not execute on customer machinesNIM-19528– Highest – Something went wrong - frontend error on upgrade from 7.0.15 to 7.2.13NIM-19536– Highest – Worker and syslogworker failure due to “Sorry, the maximum number of sessions are active” messageNIM-19542– Medium – Fix styles of Switch and FormFieldLabelNIM-19571– Medium – STP task disabled for CIsco IOS / IOS-XENIM-19598– Medium – ABTaskMapResultError: Cannot map SD-Wan policy ID “12”: “test” must be one of [object]NIM-19604– Medium – ABTaskMapResultError: “hsrp[0]” does not match any of the allowed typesNIM-19605– Medium – Configuration mgmt on Postgre doesn’t workNIM-19607– Medium – ABParseError: Error in parsing webfilter profile zigbee: [ { “code”: “invalid_type”, “expected”: “string”, “received”: “undefined”, “path”: [ “description” ], “message”: “Required” } ]NIM-19611– Medium – Cisco ASA Null0 Interface parsing errorNIM-19622– Highest – BGP Community filtering doesn’t work on IOS-XRNIM-19623– Highest – Numeric field overflow in vDevice leads to discovery not being able to finishNIM-19626– High – Manual Links visualization includes IP address not L1 or L2NIM-19627– Highest – Jumphost does not allow for IPv6 addressNIM-19629– Medium – Versa branch device IP not assigned to an interfaceNIM-19630– Medium – Notification about new version appears only in one browser tabNIM-19634– Medium – Improve issues in frontend request middlewareNIM-19663– Medium – Unable to load snapshot after upgrade to 7.3.8NIM-19664– Medium – Missing padding in overlay pagesNIM-19665– Highest –ipf-eolpackage has migrationsNIM-19673– Medium – Cisco Stack Standby Member Shows Incorrect Serial NumberNIM-19674– Medium – Logrotate missing for syslogWorkerjsonfilesNIM-19684– High – Decrease number of scanWorker logsNIM-19700– Medium – Duplicated input controls for number inputNIM-19737– Medium – ABParseError: Unable to validate healthCheck “TO_HUB_MPLS_OVERLAY”: “recoverytime” is requiredNIM-19740– High – Dashboard -Invalid initial advanced filterwhen clicking on an intent checkNIM-19741– Medium – ABTaskMapResultError: Cannot read properties of undefined (reading ‘push’)NIM-19755– Medium – Saving Discovery settings before running Discovery triggers an errorNIM-19768– Medium – Investigate mac transformation in test for voidRoutingProtocolAssignDataProvider.getNeighborsIpv4NIM-19769– Highest – MAC address format mismatch in getSwitchToRouterNexthopsNIM-19781– Medium – ABParseError: Parsing of prefix 172.16.180.0/24 failed, errorMsg: “nexthop” must be a valid ip address with a forbidden CIDRNIM-19789– High – Update transitive dependencies to solve Qwiet critical warningNIM-19790– Highest – syslogWorker is not logging after logrotate runs on the structured json fileNIM-19798– High – Remove of include ip address list record cause removing credentialsNIM-19799– Medium – Device credentials can’t be addedNIM-19800– High – Versa discovery doesn’t work on main and 7.3 branchNIM-19813– Medium – Filter issue with Logging (Remote|Local) Services pages via Dashboard - “filters.filters” does not match any of the allowed typesNIM-19814– High – IP address list component remains in error stateNIM-19815– High – Saved graph view is not deletedNIM-19827– Medium – Unreliable settings (removing credentials) on both PSQL and AQLNIM-19828– High – Error downloading diagram in vsdxNIM-19838– Medium – FE - field validation occasionally does not workNIM-19844– High – hpe arubacx LLDP Parsing errorNIM-19848– Medium – fortigate - allow showFirewallAddress6 , showFirewallAddrgrp6, fqdn6list, authIpv6List on older versionsNIM-19851– Medium – An error is thrown when applying filterNIM-19861– Medium – ABParseError: Couldn’t validate AP 6851.34cc.fb77, index: 0, with the error “l2Interfaces[0].speed” must be a numberNIM-19863– High – Getting “Cannot detect prompt” errorNIM-19889– Medium – ABParseError: “vendor” is requiredNIM-19890– Highest – syslogWorker not closing SSH sessions properly after 7.2 upgradeNIM-19908– Medium – ABParseError: “[0].delay” must be a numberNIM-19912– Medium – TypeError: Couldn’t validate route “::/0”, Cannot read properties of undefined (reading ‘map’)NIM-19913– Medium – Breaking change in PSQL format payloadNIM-19924– High – Aruba AOS-10 not properly processedNIM-19930– Medium – Support routes are not dropped from RBAC despite being admin-onlyNIM-19932– Medium – Fix failing migration on removing wlanListNIM-19934– High – Upgrade portal stuck after IPF API is running error - allow soft errorsNIM-19939– High – Meraki Improvements not documented in 7.3 Release NotesNIM-19940– Medium – ABParseError: Cannot parse ISIS neighbor: “systemHostname” is requiredNIM-19942– Medium – GUI error after deleting dashboardNIM-19944– Medium – Postgres models return malformed mac addressNIM-19946– Medium – Documentation for Meraki incorrectNIM-19953– High – Wrong ipv6 routing table nameNIM-19957– Medium – Trigger Backup API does not allow IPv6 AddressesNIM-19968– High – Investigate failing API table multicast/routes/counters from the Postgres Alpha testingNIM-19975– Medium – ABMapResultError: IPF-INFO: API data invalid! “value” does not match any of the allowed typesNIM-19985– High – PaloAlto - fix config parsing for missing categ:any statementNIM-20058– Highest – It is not possible to login to the appliance even though theipf-backend-cli-toolssays “User created successfully”NIM-20101– Medium – Value out of range in DHCP snooping API tableNIM-20255– Medium – PSQL Restore CLI script is missing vCollect snapshot import for snapshot restore optionNIM-20270– Medium – PSQL - Fix broken searching by Vlan IDNIM-20272– Medium – ipf-migrate fails migrating 6.5.2 snapshot vCollect to PSQLNIM-20311– Highest – “API died” after restoring backup (PSQL)NIM-20424– Highest – Database dump is missing in TechSupport UINIM-20858– Medium – Release Testing - Data consistency - Portchannel inbound tableNIM-20924– Medium – Use DoublePostgresColumn instead of IntegerPostgresColumn for columns using TIMESTAMP_DOUBLENIM-21307– Medium – ABMapResultError: Error validating subinterface ‘GE8:4087’ - Cannot read properties of undefined (reading ‘push’)
Tasks
Task may be associated into Epics or Stories to form complex features.
NIM-7894– Medium – Better filenames for exported graphsNIM-10948– Low – OAS SortpathsNIM-11682– Medium – Convert table /networks/path-lookup-checks to postgresNIM-11766– Medium – Convert table /security/aaa/authentication to postgresNIM-13582– Medium – SortNetwork Analysis Reporttable byStartedcolumn in descending orderNIM-13763– Medium – Migrate customer data from Arango to PSQL (ConfigManagement data)NIM-14522– Medium – Table request should take snapshot property availability from OAS request definitionNIM-14568– Medium – Enable references from eEdge to vGraphNodeNIM-14673– High – Implement Menu item componentNIM-14676– High – Implement Tab component - No scrollingNIM-15131– Medium – Replace legacy tooltip component with new one in frontend packageNIM-15350– Medium – Introduce migration to move customer data from Arango to PostgresNIM-15442– High – E2E - Security - pbrMacOption supportNIM-15492– Medium – Add support for multi-segment routing for VelocloudNIM-15519– Medium – Improve path-lookup tool based on real usageNIM-15722– Medium – Add import-snapshots option for init-postgres migrationNIM-15950– Medium – Add Policy ID column to the Zone firewall rule tableNIM-16457– Medium – Add E2E path-lookup support based on new sdWanHeader added to nexthops in routingTable taskNIM-16495– Medium – Prepare debian packages for Postgres releaseNIM-16688– High – Utilize Chromatic visual testing for Storybook - Execution Phase 1NIM-16703– Medium – Apply attribute filters to Pathlookup sources endpointsNIM-17378– High – Azure NAT Gateway - NAT supportNIM-17451– Medium – Extend discovery seeds settings – discovery historyNIM-17529– Medium – Add support for AAA on Cisco ACI (IPv4+IPv6)NIM-17537– Medium – Add support for SNMP on Cisco ACI (IPv4 + IPv6)NIM-17542– Medium – Add support for IPv6 ACL on Cisco IOS-XENIM-17545– Medium – Add support for IPv6 BGP on Cisco ASANIM-17546– Medium – Add support for IPv6 IS-IS on Cisco IOS-XENIM-17558– Medium – Add support for OSPFv3 on FortigateNIM-17674– Medium – AWS Cloud WAN discoveryNIM-17688– High – Fix type imports and exportsNIM-17723– Medium – Update Table component designNIM-17724– Medium – Render full-height drag handle border when resizing a columnNIM-17725– Medium – Add customizable description to TableNIM-17741– Medium – Add support for AAA on Fortigate (IPv6+IPv4)NIM-17906– Low – React 19 prerequisites - Remove react-copy-to-clipboardNIM-18065– Medium – MovepostOuiHandlerto ORMNIM-18066– Medium – MovepostResetOuiHandlerto ORMNIM-18068– Medium – MoveupdateOuito ORMNIM-18069– Medium – MoveputSiteSeparationHandlerto ORMNIM-18070– Medium – MovesendParsingErrorsToCallhometo ORMNIM-18081– Medium – Unique serial number field in Interface tableNIM-18115– Medium – Add VRF as a possible linecap label to all L3 protocolsNIM-18209– Low – Include paths with parameters in generated api clientNIM-18210– Medium – Include tables in generated api clientNIM-18227– Medium – Bring our ssh2 fork up to dateNIM-18231– Highest – Investigate COLLECT INTO g with g[0] usageNIM-18232– Highest – Investigate FIRST usageNIM-18393– Medium – Sentry / Callhome to catch warns from Arango/PSQL to separate groupNIM-18394– Medium – Type test React Hook Form typingNIM-18444– Medium – Change rapidoc to default to 10 recordsNIM-18492– Medium – Cisco APIC API client better incorrect data reportingNIM-18506– Medium – Remove ENABLE_ACI_FVTENANT_ENDPOINT feature flagNIM-18589– Medium – Azure - Improve VNET routingNIM-18593– High – Document Posthog architectureNIM-18625– Medium – Enable noUncheckedIndexedAccess option in TS configuration - frontend and backend packagesNIM-18679– Medium – Add background to selected table rowsNIM-18681– Medium – Send Jupee warnings to Sentry in real timeNIM-18705– Medium – Disallow all usages of consoleNIM-18749– Medium – remove getMcastSwitchFloodingNexthops functionNIM-18751– Medium – Polish architecture of Jumphost formNIM-18757– Medium – Cisco APIC - servicegraphs - change phase to pbrPreRoutingNIM-18761– Medium – Redesign table helpNIM-18797– Medium – nimpee-install-2.0 - raise max update package sizeNIM-18802– Medium – Create a variant of Select component with mandatory valueNIM-18811– Medium – URL Filtering is not shown in the ZoneFW TableNIM-18812– High – Analyse getArangoModels in API Controllers - PART 2NIM-18842– Medium – Rename “Snapshot Retention” pageNIM-18853– Medium – F5OS API clients and basic backend supportNIM-18854– Medium – F5OS API Clients frontend and full backend supportNIM-18884– Medium – Update Intent RulesNIM-18893– Highest – Create ipf-node deb package that provides Node.js v22NIM-18895– Medium – Azure Virtual Machine Scale SetsNIM-18898– Medium – AWS auto scaling groups [discovery]NIM-18907– High – NSX-T client to trigger re-auth on 500 http response with “INVALID_ARGUMENT: The token is not valid”NIM-18915– Medium – Cisco APIC - service graph - extend redirection for vlanNIM-18918– Medium – Make Sentry display the original error textNIM-18920– Medium – Re-enable UI system update notificationsNIM-18921– Medium – make links in diagram bi-directionalNIM-18922– Medium – Test F5OS All tenants on one server need to be discovered (prevent SN duplicates)NIM-18923– High – [backend] Add support for manual link portchannels in e2eNIM-18926– Medium – Compress large received data itemsNIM-18933– Medium – Convert arango export to PSQLNIM-18941– Medium – Invalidate callhome commands older than 6.8 and tasks older than 6.9NIM-18946– Medium – Add Postgres implementation for manual links and virtual wire in e2eNIM-18947– Medium – Investigate and fix getMacAqlNoTagOnRouter (arangoTaskerCalcSwitchRouterVlansDataProvider)NIM-18948– High – Perform MAC lookup for traffic sending over manual linkNIM-18958– High – Bidirectional manual links create loopsNIM-18959– Medium – AWS API - syntax check for all assume rolesNIM-18971– Medium – FixgetAllSnapshotsquery failing testsNIM-18972– Medium – FixgetCliTasksquery failing testsNIM-18975– Medium – FixgetPriorityIpsquery failing testsNIM-18983– Medium – Get rid of discovery-shared Biome warningsNIM-18993– Medium – Azure subnetsNIM-18994– Medium – AWS subnetsNIM-18995– Medium – GCP subnetsNIM-19017– Highest – Investigate failing e2e pathlookup tests in postgres modeNIM-19028– Medium – Manual link constrain validation - avoid create two links between same devices and same ports, links are bidirectional by defaultNIM-19047– High – 7 - Important - IPF License Key World-ReadableNIM-19048– High – 8 - Important - Sensitive Information Disclosed in System LogsNIM-19066– Medium – Finish RFC21 (Independent product versioning) and create implementation tasks stemming from RFCNIM-19067– Medium – Rewrite SNMP to remove saga from this part of applicationNIM-19071– High – Investigate a way how to persuade Chromium to accept self-signed certificateNIM-19074– Medium – Unify & fix how we work with product version in codeNIM-19084– Medium – adding v6 support for bgp advertised routes taskNIM-19096– Medium – Add validation for existing name of the dashboardNIM-19108– Medium – Keep all commands in the CLI logNIM-19113– High – Convert getEdgeSeverity() to PSQLNIM-19116– Medium – Implement collection of device configurationNIM-19117– Medium – APIC Service graph - update original of pathlookup optionNIM-19120– Medium – Migrate updateVnetRouteNexthopIpList to PSQLNIM-19121– Medium – Migrate updateErcRouteNexthopIpList to PSQLNIM-19123– Medium – Migrate setEdgeAzureErc to PSQLNIM-19126– Medium – Backend extensions orchestrator improvementsNIM-19139– Medium – Display a deprecation noticeNIM-19141– Medium – ipf-system-upgrade: Update APIFlask data schemes for marshmallow v4.0.0 changesNIM-19146– High – Analyse database sizeNIM-19149– Medium – Implement Config Backup over IPv6NIM-19150– High – Create a generic URL shortener for API GET requestsNIM-19151– Medium – GCP zonal managed instance groupsNIM-19155– Medium – Azure - Improve Internal LB routingNIM-19157– High – Add API Documentation Link to Support MenuNIM-19163– Medium – F5OS - basic discovery - devinfo, init, osversionNIM-19166– Medium – F5OS - network - l2/l3 interfacesNIM-19167– Medium – F5OS - network - neighborsNIM-19169– Low – Remove no longer existing wlanList task from Disabled Discovery Tasks setting, considering migrationNIM-19177– Medium – [PSQL] OUI tests are failing on a timeoutNIM-19188– Medium – [frontend] Show warning when selected interface for manual link is a subinterfaceNIM-19205– Medium – Convert table /management/banners/summary to PostgresNIM-19206– Highest – Convert table /apic/service-graphs to PostgresNIM-19207– Highest – Convert table /mpls/l2-vpn/circuit-cross-connect to PostgresNIM-19210– Medium – Allow discovery for Cloud Managed Catalyst switchesNIM-19211– Medium – Improve MAC address table for Meraki switchesNIM-19213– Low – Improve error reporting in copyToClipboardNIM-19223– Medium – Make technology table pages pinned by particular tabNIM-19224– Medium – Redesign table pagesNIM-19230– Medium – Migrate tables module in backend-shared according to RFC0014NIM-19234– Medium – appliance-builder should mark root FS for fsckNIM-19241– Medium – Add STP port statuses for Meraki switchesNIM-19247– High – Convert getDeviceConfigurationHandler() to PSQLNIM-19275– Medium – Define Process and Automation for Chromatic Visual Testing IntegrationNIM-19280– Medium – Optimize “/tables/interfaces/duplex” API table performance when many snapshots are loadedNIM-19283– Medium – Optimize “/tables/addressing/mac” API table performance when many snapshots are loadedNIM-19284– Medium – Optimize “/tables/inventory/interfaces” API table performance when many snapshots are loadedNIM-19285– Medium – Optimize “/tables/spanning-tree/ports” API table performance when many snapshots are loadedNIM-19286– Medium – Optimize “/tables/vlan/device” API table performance when many snapshots are loadedNIM-19287– Medium – Optimize “/tables/spanning-tree/inconsistencies/neighbor-ports-vlan-mismatch” API table performance when many snapshots are loadedNIM-19288– Medium – Optimize “/tables/addressing/duplicate-ip” API table performance when many snapshots are loadedNIM-19289– Medium – Optimize “/tables/networks/gateway-redundancy” API table performance when many snapshots are loadedNIM-19290– Medium – Optimize “/tables/neighbors/all” API table performance when many snapshots are loadedNIM-19291– Medium – Optimize “/tables/neighbors/unidirectional” API table performance when many snapshots are loadedNIM-19292– Medium – Optimize “/tables/addressing/arp” API table performance when many snapshots are loadedNIM-19293– Medium – Optimize “/tables/networks/route-stability” API table performance when many snapshots are loadedNIM-19294– Medium – Optimize “/tables/security/secure-ports/interfaces” API table performance when many snapshots are loadedNIM-19295– Medium – Optimize “/tables/reports/eof/detail” API table performance when many snapshots are loadedNIM-19297– Medium – Optimize “/tables/qos/queuing” API table performance when many snapshots are loadedNIM-19298– Medium – Optimize “/tables/load-balancing/virtual-servers/pool-members” API table performance when many snapshots are loadedNIM-19299– Medium – Optimize “/tables/interfaces/port-channel/member-status” API table performance when many snapshots are loadedNIM-19300– Medium – Optimize “/tables/inventory/phones” API table performance when many snapshots are loadedNIM-19301– Medium – [frontend] Prepare manual link scenario for MQNIM-19302– High – Redesign Snapshot Management to better show more loaded snapshotsNIM-19318– Medium – Switch Postgres feature flags on by defaultNIM-19319– Medium – Switch OAS to be generated from PSQLNIM-19322– Medium – FixgetApClientByHashquery failing testsNIM-19323– Medium – FixgetMcastFromCloudTargetsquery failing testsNIM-19324– Medium – FixgetMcastRouterToCloudquery failing testsNIM-19325– Medium – FixgetSwitchVirtualWireInfoquery failing testsNIM-19326– Medium – FixgetWirelessApquery failing testsNIM-19328– Medium –ipf-sso-helper-setupshould be more user friendlyNIM-19335– Medium – Make devimage PSQL-firstNIM-19345– Medium – Create F5OS clients documentationNIM-19359– Medium – Explore potentially risky places that utilize data from the table vUrlNIM-19390– Highest – Convert pwdList from global settings to RFC0014NIM-19391– Medium – Return jobId when scheduling oneNIM-19398– Medium – Optimize “/tables/spanning-tree/instances” API table performanceNIM-19404– Medium – AQL query calcFromArp follow-upNIM-19405– High – Address import/export inconsistencies [7.4 / PSQL]NIM-19412– Medium – NAE - Add IPv6 property to task’s documentationNIM-19424– Medium – Azure scalingGroups - task supportNIM-19426– Medium – AWS NAT gateway NAT44 - discoveryNIM-19432– Medium – Rename SeveritySelect to IntentFilterSelect component based on latest FigmaNIM-19436– Medium – CHREP/Sentry - implement prioritization functionNIM-19441– Medium – CHREP/Sentry - Design normalization function and test locallyNIM-19442– Medium – CHREP/Sentry - implement normalization function and adjust fingerprintsNIM-19457– Medium – Optimize “/tables/interfaces/inconsistencies/summary” API table performance when many snapshots are loadedNIM-19458– Medium – Optimize “/tables/addressing/managed-devs” API table performance when many snapshots are loadedNIM-19459– Medium – Optimize “/tables/addressing/hosts” API table performance when many snapshots are loadedNIM-19461– High – Solve critical Qwiet warningsNIM-19470– Medium – Enable Postgres database migrationsNIM-19474– Medium – Reduce number of parallel update device messages in postgres modeNIM-19481– Medium – Handle data sanitization in PSQL db dumpsNIM-19482– Medium – Import PSQL DB dumps with partitionsNIM-19485– Medium – Fix OUI duplicatesNIM-19492– Medium – InterfaceEndpoints new task and support for azureNIM-19493– Medium – Explore potentially risky places that utilize data from the table vSettings - focus on cliSessionsLimit + Discovery and CLI settings formsNIM-19496– Medium – RemovevnetIdproperty fromcloud\Subnetstask for AzureNIM-19525– Medium – AWS client get to take optional assumeRole parameterNIM-19530– Medium – Remove unconverted itemsNIM-19535– High – Fix UX of IP/Subnet input component when submitting with non-empty text inputNIM-19539– Medium – CHREP/Sentry - Implement CHREP Task resolution (using Sentry API)NIM-19540– Medium – CHREP/Sentry - Implement Task verification (inc. version check)NIM-19543– Medium – Add PSQL to support status pageNIM-19549– Medium – Investigate migrating ConfigManagement data from Arango to PSQLNIM-19551– Highest – Version Resolution MiddlewareNIM-19552– Medium – Legacy Path Migration MiddlewareNIM-19555– High – OpenAPI Documentation UpdateNIM-19557– Medium – Make snapshotId required in the PathlookupNIM-19558– Medium – Use snapshotId in the pathlookup/aci data providerNIM-19559– Medium – Use snapshotId in the pathlookup/deviceHelpers data providerNIM-19560– Medium – Use snapshotId in the pathlookup/ifaceHelpers data providerNIM-19561– Medium – Use snapshotId in the pathlookup/mpls data providerNIM-19562– Medium – Use snapshotId in the pathlookup/multicast data providerNIM-19563– Medium – Use snapshotId in the pathlookup/routing data providerNIM-19564– Medium – Use snapshotId in the pathlookup/security data providerNIM-19565– Medium – Use snapshotId in the pathlookup/startingQueue data providerNIM-19566– Medium – Use snapshotId in the pathlookup/switching data providerNIM-19567– Medium – Use snapshotId in the pathlookup/wireless data providerNIM-19588– Medium – 8 - Important: Updateexpectto do not log passwordsNIM-19593– Medium – Cisco ACI - Peformance Optimization for actrlRule mappingNIM-19599– Medium – Azure - Collect service tag prefixes for subnets without NICNIM-19600– Medium – Implement enable support for configuration mgmt and hybrid discoveryNIM-19716– Medium – Investigate why DoW discovery failedNIM-19719– Medium – Create documentation for VELOS/rSeries - release notesNIM-19722– High – CLI tool to support postgres migrationNIM-19765– Medium – Ensure apache2-utils is removed on machines upgraded to 7.4+NIM-19792– Medium – GCP regional managed instance groupsNIM-19796– Medium – Allow select multiple snapshots in PSQL version of snapshot listNIM-19801– High – Test BGP community implementation for Juniper and create an MQ ticket for itNIM-19808– Medium – Rename Untitled snapshots in Current snapshot select-boxNIM-19817– Medium – Recheck the partition selection in all data provider queriesNIM-19819– Medium – Addnet.ipv4.ip_local_reserved_portskernel parameters to ensure LISTEN ports for applicationsNIM-19906– High – Enhance snapshot listNIM-19920– Medium – Make shell script wrapper for ipf-migrate packageNIM-19923– Medium – Prevent closing modals with forms on click awayNIM-19943– High – Investigate usage of createTransformFunction in tests definitionsNIM-19965– Medium – Remove useless code from ipf-techsupport-exporterNIM-20186– Medium – Cleanup warnings in cacheNIM-20187– Medium – Cleanup warnings in locksNIM-20188– Medium – Cleanup warnings in loggerNIM-20190– Medium – Cleanup warnings in backend-cli-toolsNIM-20192– Medium – Cleanup warnings in discovery-afterrestartNIM-20193– Medium – Cleanup warnings in discovery-networkerNIM-20194– Medium – Cleanup warnings in discovery-scanworkerNIM-20195– Medium – Cleanup warnings in syslogworkerNIM-20196– Medium – Cleanup warnings in discovery-taskerNIM-20197– Medium – Cleanup warnings in discovery-updaterNIM-20198– Medium – Cleanup warnings in discovery-workerNIM-20217– Medium – qa-tests - missing 7.5 and 8.0 snapshotsNIM-20242– Highest – Retest 7.5 upgrade and installation scenariosNIM-20324– Medium – Remove periodic Arango calls frommasterProcess.tson PSQLNIM-20349– Low – Fix failing tests for table management/ntp/summary (valid)NIM-20352– Medium – Fix failing tests for table reports/settingsOui (valid)NIM-20355– Highest – Fix failing tests for table security/lsvpn/gateways (valid)
Sub-Tasks
Sub-tasks are very well contained work packages, organized under Tasks.
NIM-18238– Medium – Check COLLECT usage in calcFromArp (arangoTaskerCalcHostTableDataProvider)NIM-18243– Medium – Check COLLECT usage in calcVlanForACIWithXdpConnectedSwitches (arangoTaskerCalcVlanAciDataProvider)NIM-18244– Medium – Check COLLECT usage in getVlan (arangoTaskerCalcVlanBridgeDomainDataProvider)NIM-18245– Medium – Check COLLECT usage in createELinksFromECdp (arangoTaskerSaveELinksDataProvider)NIM-18246– Medium – Check COLLECT usage in createELinksFromECef (arangoTaskerSaveELinksDataProvider)NIM-18247– Medium – Check COLLECT usage in createELinksFromStp (arangoTaskerSaveELinksDataProvider)NIM-18261– Medium – Check FIRST usage in getGatewaysForArpDevice (arangoPathlookupStartingQueueDataProvider)NIM-18275– Medium – Check FIRST usage in calcForVirtualMachinesIpv4 (arangoTaskerCalcHostTableDataProvider)NIM-18284– Medium – Check FIRST usage in calcVlanForACIWithXdpConnectedSwitches (arangoTaskerCalcVlanAciDataProvider)NIM-18285– Medium – Check FIRST usage in getCdp (arangoTaskerCalcVlanAciDataProvider)NIM-18292– Medium – Check FIRST usage in saveWirelessHostNodes (arangoTaskerSaveGraphElementsDataProvider)NIM-18297– Medium – Check FIRST usage in updateTrapSourceIp (arangoTaskerSetSnmpIntIpDataProvider)NIM-18298– Medium – Check FIRST usage in updateTrapSourceInt (arangoTaskerSetSnmpIntIpDataProvider)NIM-18482– Medium – Create rspack configuration for backend-testingNIM-19164– Medium – F5OS - basic discovery - devinfo, init, osVersion - RSeriesNIM-19165– Medium – F5OS - basic discovery - devinfo, init, osVersion - VELOSNIM-19235– Medium – Alcatel PerVlan STP - commands + testsNIM-19236– Medium – Alcatel PerVlan STP - task + parsing testNIM-19279– Medium – Optimize “/tables/wireless/access-points” API table performance when many snapshots are loadedNIM-19486– Medium – F5OS - network - l2/l3 interfaces (Velos)NIM-19487– Medium – F5OS - network - l2/l3 interfaces (RSeries)NIM-19581– Medium – F5OS - network - neighbors - VelosNIM-19582– Medium – F5OS - network - neighbors - RSeries