NIMPEE v2.x.x

NIMPEE v2.x.x

2.4.0 (27th February 2019)

Features - Protocol and technology support

• Collecting SNMP configuration for all vendor/families
  • Technology => Management => SNMP
• Collecting Netflow / IPFIX, sFlow configuration for all vendor/families
  • Technology => Management => Flow
• Added VXLAN support for Cisco IOS-XE, NX-OS, Arista EOS
  • Technology => VXLAN
• Added BGP support for Arista EOS
• Added NTP support for Arista EOS, ArubaSW, Huawei, F5
• Added OSPF support for Arista EOS, Check Point Gaia, Cisco ASA, Extreme XOS, Fortinet FortiGate, Huawei VRP, PaloAlto
• Added Routing table summary for Arista EOS, Extreme XOS, Huawei VRP, Checkpoint, Cisco ASA
• Added VRRP support for Fortinet FortiGate
• Configuration Management - added support for Fortinet FortiGate, Extreme XOS
• Added overview of local and remote logging targets configured on network devices
  • Technology => Management => Logging
• BGP address family support (new tables with all session families).
  • Technology => Routing => BGP => Address Families (table is also available after click from graph on BGP edge)

Features - Visualization

• Significant speedup of graph for big networks
• Added VXLAN as L3 protocol
• Host to GW - "show only active devices" option added, it will display only devices in the path
• Path lookup - Asymmetry check is evaluated based on the layer instead of a protocol.
• Graph RIB edges - L2 switches have default GW route disabled by default. Can be enabled in RIB protocol settings
• Unmanaged devices can now be added and displayed, even if connected edges are not visible.

Discovery

• Shaper was limited to 10Mb

Improvements

• Discovery page - statistic about how many devices were discovered is without AP now
• Added support for Cisco Mobility Express WLC detection
• Site separation by regex - you can specify the transformation of hostnames before regex separation is used. It solves a situation when is used mix uppercase/lowercase hostnames in the network.
• Arista vEOS version detection improvement
• Juniper ISIS - added support for any other level than 1 or 2
• Juniper Loopback interfaces lo0.16384, lo0.16385, lo0.32768 are internal auxiliary loopbacks and are not included in discovery.
• Fortinet FortiGate - improved version detection for devices running with FortiOS6
• Fortinet FortiGate - improved prompt detection in case that prompt ends with $
• Cisco IOS/XE/XR - Updated next-hop evaluation for CEF/MPLS records
• Cisco SG300 - Added support for different show version output
• Huawei - added NTP support on Huawei VRP 8.x
• Huawei - xDP interface names correctly standardized
• Huawei - Routing table sanitation (127.0.0.0 and 0.0.0.0 next-hop removed)
• HP Aruba AP, F5 - added missing memory information
• HP Aruba switch/Procurve - OS detection - added support for 2600/2300/2500 platforms
• HP Aruba switch/Procurve - Localhost routes removed from the routing table
• Routing stability table - Added connected routes

Bug Fixes

• Virtual gateways count in tables fixed.
• Path lookup - Edge switch must be in the same site as default gw (fixes wrong edge switch selection because of virtual mac addresses)
• Router to switch L2 connection - Fix for routers with virtual mac addresses
• Cisco IOS - MPLS forwarding table fixed parsing - output for one record can be broke to more lines
• Cisco IOS, IOS-XE w/o routing table - default gw entry adds interface now
• Cisco IOS - fixed parsing "show environment all" command
• Cisco IOS - ACL - role based trustsec entries are ignored until trustsec support will be added.
• Cisco IOS-XR duplicate hsrp virtual addresses fixed
• Cisco NX - improved parsing "show environment fex all" when it returns "FEX is not present"
• Cisco ASA - routing table fixed parsing
• Cisco XR - improved parsing for "show mpls ldp vrf \ neighbor detail" command
• Cisco IOS-XE OSPF interfaces fixed parsing for the unnumbered tunnel interface
• Cisco MPLS LDP - updated parsing for LDP neighbor with no source interface
• Cisco QOS policy-map interface - improved parsing for different command output
• Cisco IOS-XE 3560 - show version stack inventory parsing fix.
• Cisco SG - fixed parsing of different output for STP detail command
• Extreme XOS - MTU wasn't parsed on extreme xos 22.5.1.7
• Path lookup - FEX on access fixed
• Arista vEOS - missing SN is replaced by system mac address
• Arista vEOS - interface unconfigured speed parsing fix
• Arista vEOS - arp N/A timer parsing fix
• Arista vEOS - interfaces MTU parsing fix
• Arista vEOS - parsing fix when NTP is disabled
• Extreme XOS - memory information fixed parsing
• Checkpoint Gaja - fixed parsing of different output for command fw ctl pstat"
• Fortinet FortiGate - fixed ambiguous command to get info about the routing table
• Fortinet FortiGate - fixed parsing for different output about memory information on FortiOS6
• HP Aruba switch - fixed NTP associations
• HP Aruba switch - Reported CDP devices without capabilities fix
• HP Aruba switch - Non-complete interface record parsing fix
• HP Aruba switch - show tech buffers command parsing fix
• HP Aruba v8 fixed parsing to get details about AP
• HP Comware fixed parsing of different output for device interfaces
• HP Comware fixed parsing of different output for linkAggregationVerbose command
• Huawei VRP - fixed ambiguous command for observer port command
• Juniper - SRX firewall/router mode detection, the default is firewall when no relevant output is available
• Tables - FIX filtering in columns where is able to switch property for filtering i.e. Nat - Rules
• Tables - Filter rules were inserted randomly after the seventh rule
• Tables - some tables had wrong values for export into CSV (Object Object)

2.3.1 (7th December)

Improvements

• Path lookup - improved calculation for the default gateway
• Cisco ASA serial number detection updated to better support virtualized devices
• Cisco NX - improved parsing for FEX information
• Cisco IOS/IOS-XE - improved parsing for "show monitor detail" command
• Cisco NX - improved parsing for "show monitor session all" command

Bug Fixes

• Cisco NX 7K - fixed parsing of version, VDC wasn't recognized
• Juniper JunOS - fixed parsing pf memory information

2.3.0 (5th December)

Features - Protocol and technology support

• Added FHRP support for HP Aruba/ArubaSw, Huawei VRP, Arista EOS, Cisco XR
• Added support for FEX modules connected to Cisco Nexus 7000 series switches
• Added support for environmental information for Cisco Nexus FEX modules
• Added support for MPLS & LDP protocol for Cisco IOS/IOS-XE/IOS-XR/NX, Juniper
  • New tables in Technology => MPLS
• Added support for Port Mirroring for Cisco IOS/IOS-XE/NX/SG, Juniper JunOS, HP Comware, Huawei VRP
  • New table in Technology => Management => Port Mirroring
• Added support for NAT for Cisco IOS/IOS-XE/ASA
  • New tables in Technology => Addressing => NAT

Features - Visualization

• Default view - each user can define own default view instead of displaying overall network topology
• Added MPLS support in path lookup & LDP protocol for edges
• Enhanced orientation in diagrams - when is graph opened through the link on hostname column then the graph will be zoomed in to the device.
• Site interconnections are now displayed separately from generic transit
• The site can be renamed directly from a graph (only for uses with write privilege)
• Window details dialogs are now open in a direction where is more space, better UX.
• Protocol CEF was renamed to RIB and CDP to xDP
• Unmanaged neighbors and Transit edge are now the same types of neighbors. They can be grouped using prefix length setting under Options > Site edge

Features - Discovery

• New Settings - OUI, where can be enabled/disabled vendors what will be used in discovery from ARP protocol.
• Cisco SG300 family - added support for SF switch line

Improvements

• Inventory/devices added columns Total memory, Used memory, Memory Utilization %
• Enable to searching in ACL/Zone policies using IP or network

Bug Fixes

• Switch to router L2 connections - Mismatch duplicated connections created on the router with same mac address on all ports. Fixed when xDP exists between switch and router.
• Graph - all graph icons are preloaded into cache now, this fixing situation when was generated Site Low-Level design report and graphs were without icons.
• Report Site Low-Level graph could be generated as corrupted docx (not escape data in XML)
• The app could crash in IE - Inventory/Sites when Site report was downloaded and then was tried to load Site Diagram then the App crashed - fixed (It's highly recommended to use Chrome, instead IE. Chrome has much better performance)
• Cisco NX - LLDP - capabilities 'not advertised' were not parsed correctly, some server entries without destination port were added incorrectly.
• Cisco NX - fixed parsing of "show fex detail" command
• Cisco NX 5000 - power supply failure from environment fix
• Cisco NX ACL options - generic support for 'divert' option added
• Cisco EIGRP - Ambiguous command fixed on ASR9000
• Cisco EIGRP - Fixed parsing when enabled but no neighbors detected
• Cisco BGP - DMPVPN no families fix
• Cisco IOS-XR OSPF parsing fix when an interface is down
• Cisco IOS-XE OSPF neighbor parsing fix (output may differ per version)
• Cisco IOS/IOS-XE: RIP - NVI interfaces are ignored now
• Cisco IOS/IOS-XE - Routing table - added support for default gateway detection e.g. on L2 switches
• Cisco AAA - extended support for AAA-related options and setting
• Cisco service object-groups - added support for ICMPv6 params parsing
• HP Comware - Ethernet 100Mbps interface parsing fix
• HP Comware - Routing table inactive next-hop removed
• F5 BigIP - VLAN interfaces state is now used from 'list net self' command only
• xDP - if capability contains IGMP, then the neighbor is recognized as a network device
• User edge port and user mac address recognition improved with OUI network vendor.
• Scheduling of System Backup could fail and the process wasn't executed at all
• System backup - FTP directory was transformed to lowercase it could be a problem when the directory on FTP server was in uppercase.
• Dashboard - fixed Snapshot History widget for MAC's
• Dlink and Enterasys wrongly recognized as Aruba switch. Version parsing fixed.
• Routing table - recursive lookup for vrf leak fix
• Graphs - Host to gateway and path lookup default gateway selection fix (the mask is considered in calculation now)
• 802.1x interface authentication port control mode is now parsed from show run if it is not available in show dot1x command output
• Updated RIP neighborship mapping for JunOS routers

2.2.9 (31st October 2018)

Features - Analytics

• Path verification - you can now save a path for continuous verification
  • Saved paths are stored in Technology \ Routing \ Path verifications
• Path analysis - added support for Symmetry verification
• Path analysis - added support for L2 flooding
• Path analysis - added overview tab listing all matching filters and forwarding
• History - new widget in Dashboard displays the number of discovered devices and changes for each snapshot.

Features - Protocol and technology support

• Added vendor support for Arista EOS
• Added vendor support for HP Aruba switch / ProCurve
• Added vendor support for Huawei VRP
• Added vendor support for F5 BIG IP
• Detailed information about IS-IS protocol (support for Juniper JunOS)
  • New table Technology \ Routing \ IS-IS \ Neighbors
  • New table Technology \ Routing \ IS-IS \ Interfaces

Features - Visualization

• Network overview - protocols settings are now persistent
• Added MTU tab into window detail for OSPF, EIGRP, and RIP protocols
• Added IS-IS routing protocol visualization
• Improved wired hosts usability
• Specific routing protocol sessions to transit cloud are now shown when "Site edge" is turned on.
• New option added "Show edge devices only" which shows devices connecting to edge
• Improved overall graph performance

Features - Discovery

• Discovery - Added DNS Name column to Error Report (DNS Resolve has to be enabled in Settings).

Improvements and Bug Fixes

• Site separation - R&S option site name swapping fix
• Routing table - fixed recursive NH interface lookup
• Graph - position of transit cloud in the network overview is now saved
• Graph Path lookup - Forwarding L2 switch to an unknown neighbor
• Router with only one route and ATM interface was recognized as 'host'
• Path lookup - Default GW forwarding fix
• BGP neighbors uptime column is now properly formatted
• Cisco IOS OSPF neighbors parsing fix
• Cisco IOS/IOS-XE/IOS-XR BGP neighbors parsing fix
• Cisco IOS-XE Auth session parsing fix (different header and no session output for interface cmd)
• Cisco IOS-XE 3850 - version parsing fix
• Cisco Catalyst 9300 - version parsing fix
• Cisco IOS-XE VRRP parsing fix
• Cisco IOS fixed ACL parsing
• Cisco IOS BGP dynamic neighbor address parsing fix
• Cisco Updated local IP address information for EIGRP neighbors for unnumbered interfaces.
• Cisco - IPv4 Unicast address group for BGP neighbors accepts only IPv4 records.
• Juniper JunOS - correctly detects SRX device in packet mode as router device type
• HP Comware BGP neighbor idle parsing fix
• HP Comware platform a-msr30 wasn't discovered
• HP Aruba - fixed version detection, enable command now trying all combination from enabling password list
• Riverbed CMC - version parsing fix
• Riverbed updated telnet access information.
• Juniper BGP neighbor session time parsing fix
• Scheduled snapshots do not work, wasn't rescheduled on error
• Discovery - enable password list wasn't sorted by priority
• Mac table - NX-OS vPC peer link support added

2.2.8 (10th September 2018)

Features - Analytics

• Detailed information about all Unmanaged Neighbors
  • New table Technology \ Interfaces \ Connectivity Matrix \ Unmanaged Neighbors Summary
  • New table Technology \ Interfaces \ Connectivity Matrix \ Unmanaged Neighbors Detail

Features - Protocol and technology support

• BGP protocol support for HP Comware
• Detailed information about EIGRP protocol (support for Cisco IOS, IOS-XE, IOS-XR, NX-OS)
  • New table Technology \ Routing \ EIGRP \ Neighbors
  • New table Technology \ Routing \ EIGRP \ Interfaces
• Detailed information about RIP protocol (support for Cisco IOS, IOS-XE, IOS-XR, NX-OS, HP Comware, Juniper JunOS)
  • New table Technology \ Routing \ RIP \ Neighbors
  • New table Technology \ Routing \ RIP \ Interfaces

Features - Visualization

• The NEW design of edges between the nodes, you can switch between "Curved" and "Straight" (new) type in Protocols menu
• Added EIGRP routing protocol
• Added RIP routing protocol
• OSPF & BGP & EIGRP & RIP protocols added into overall network overview
• MTU Check - edges are colorized according to colorization rules in table Technology / Interfaces / MTU. If there is no colorization rule then the color will follow these rules
  • green - MTU is the same on both sides
  • red - MTU is not the same on both sides
  • gray - one if the MTU values are empty.
• Path lookup - Zone Firewall matching rules table
• Path lookup - each forwarding decision can be highlighted in a graph for a selected node. See forwarding tab
• Path lookup - the devices where the packet is stopped because security rules (ACL, Zone FW) are now red.
• Unmanaged neighbors - also displaying unmanaged neighbors from routing protocols
• Additional information can be added for labels, for example, Interface Media, Interface IP, Subnet, STP path cost, AS for BGP/EIGRP, etc.
• "Non-redundant devices" option has been renamed to "Single points of failure"

Features - System

• NIMPEE setup wizard added
• NIMPEE UI will inform you when not enough space on disk remaining
• Added SFTP as a destination for backups
• System Update - Added "upload offline upgrade package" button even if Callhome server is reachable

Features - Discovery

• Riverbed Steelhead - in some cases CLI output had an escape sequence what broke a device prompt detection.
• Discovery - Connectivity Report - added column DNS Name - the resolved name of the IP address (DNS Resolve has to be enabled in Settings).

Improvements and Bug Fixes

• Tables - new advanced filter operator "has the color", so you can filtering on column what has some color and add next filter rule for the same column to get a specific result.
• Site Separation - the process could fail when using a regex for separation, and one of the sites was previously renamed.
• STP - inconsistencies Multiple STP & Vlans without STP: false positives fix
• Juniper JunOS - Hostname representing chassis cluster is now derived from the active node.
• CDP/LLDP devices with phone capabilities were recognized as a network device.
• Host to the gateway - FW as default GW added
• Port-channel with member port XDP is not now edged port
• Fixed mapping of results for BGP tasks
• End to End path lookup - connected host mac address is now taken from gateway ARP.
• STP - inconsistencies Multiple STP & Vlans without STP false positive fix
• FIXED DNS resolving of Discovered inventory
• Scheduled backup with destination FTP failed, the credentials weren't decrypted
• Fixed NTP information - Correct parsing of GNSS reference, stratum \< 16 as check for reach-ability
• Cisco Nexus 7000 admin vdc NTP copy to other vdc (system clock is controlled only from one vdc)
• Cisco IOS - fixed reported parsing bugs for command "show ip access-list"
• Cisco IOS - fixed reported parsing bugs for command "show bgp all neighbor"
• Cisco IOS - fixed reported parsing bugs for command "show bgp all summary"
• Cisco IOS - parsing fix dynamic cluster-HSRP/NAT acl rules
• Cisco IOS - fixed reported parsing bugs for command "show ip ospf neighbor detail"
• Cisco IOS - auth session parsing fix when no output is available
• Cisco WLC - fixed processing of pagination
• Cisco WLC - fixed reported parsing bugs for command "show ap config 802.11a summary"
• Cisco WLC - fixed reported parsing bugs for command "show ap config 802.11b summary"
• Cisco WLC - fixed reported parsing bugs for command "show ap wlan 802.11a \"
• Cisco WLC - fixed reported parsing bugs for command "show ap wlan 802.11b \"
• Cisco WLC - fixed reported parsing bugs for command "show ap inventory \"
• Cisco WLC - fixed reported parsing bugs for command "show network summary"
• Cisco NX-OS - fixed reported parsing bugs for command "show interface status err-disabled"
• Cisco NX-OS - fixed reported parsing bugs for command "show ip ospf interface vrf all"
• Cisco NX-OS - fixed reported parsing bugs for command "show access-list summary" (IPv6 entries).
• Cisco NX-OS - fixed reported parsing bugs for command "show ip ospf interface vrf all"
• Cisco IOS-XE (Catalyst) - fixed parsing of "show version" when stack switch has "Unknown" uptime
• Cisco fixed parsing of command 'show ospf neighbor detail'. OSPF areas can be represented by either number or CIDR
• Cisco ASA parsing fix for routing table - age and interface for dynamic routing protocols
• Cisco IOS - LLDP/CDP neighbor interface for phone fix
• HP Aruba - fixed reported parsing bugs for command "show ap bss-table"
• HP Comware - fixed reported parsing bugs for command "display ospf peer verbose"

2.2.7 (31st July 2018)

Features - Analytics

• Technology / Security / Secure ports - 802.1x / Users - added information about authorized user. Columns Username, User MAC, User method, User state

Features - Protocol and technology support

• Detailed information about BGP protocol (support for Cisco IOS, IOS-XE, IOS-XR, NX-OS, Juniper JunOS)
  • New table Technology \ Routing \ BGP \ Neighbors
• Collecting information about MTU on interfaces
  • Added MTU column into Inventory\Interfaces
  • New table Technology \ Interfaces \ MTU
  • Added MTU consistency check into Diagrams
• Collecting information about NTP
  • New tables Management \ NTP
• Collecting information about Wireless Radios on Wireless Access Points
  • New table Technology \ Wireless \ Radios/BSSID
• Cisco IOS-XR collecting information about OSPF protocol

Features - Visualization

• Host to gateway lookup is part of Network graph now and display the path over the network location
• Added option to display/hide Wireless Access Points - AP is disabled by default
• Align & Distribute menu which helps to quickly arrange multiple selected nodes
• New options "MTU checks" to check MTU consistency
• Path lookup - ACL implicit rules added to a matching table, show details button added
• End to end path lookup possibility to specify TCP Flags in packet
• Added BGP routing protocol
• Added OSPF routing protocol

Features - System

Features - Discovery

• Extreme XOS - in some cases CLI output had an escape sequence what broke device prompt detection.

Improvements and Bug Fixes

• Tables
  • added button what prepare a link for sharing of current table view
  • Table header can be seen as fixed (sticky) when scrolling
  • new advanced filter operator - not equal to a column
• Management / Changes - Speed up of the table for snapshot selection
• Juniper JunOS Description for interfaces is now available in NIMPEE.
• Juniper JunOS added MAC address for logical interfaces.
• Juniper JunOS Fixed parsing of routing table with MPLS records
• Juniper JunOS show ethernet-switching interfaces changed to an interface for compatibility with newer platforms
• Juniper JunOS Updated routing engine schema for EX3400
• Cisco - Secured Access ports - fixed parsing for ports with MAB only clients, changed command for IOS c2960c405
• Cisco WLC - fixed getting of hostname for HA cluster
• Cisco object-group parsing fix - support for new protocol names added
• Cisco IOS - fixed ambiguous command & parsing for Power & Fan environment
• Cisco IOS - fixed authentication session interface command for version higher than 15.2
• Cisco IOS - fixed mapping of state for HSRP output
• Cisco ASA - fixed parsing of a routing table
• Cisco ASA - fixed parsing of "show version" command, missing SN for the particular switch in stacking information
• Cisco ASA - ACL is now read from configuration (using regular commands was too expensive)
• Cisco NX-OS - the fixed end to end path lookup for routes with default VRF
• Cisco NX-OS - fixed system version parsing
• Cisco NX-OS - fixed parsing of 'show access-list summary' command
• Extreme switch SN - if not present chassis or switch in inventory, then SN is taken from the first available slot
• FIX: If the server was restarted during the discovery process then the discovery process was stuck after server restart.

2.2.6 (2nd July 2018)

Features - Analytics

• Greatly improved support of security rules interpretation for Juniper, Cisco, and HP Comware
• Added default & global policies for Zone-based firewalls

Features - Protocol and technology support

• Added collection of ARP and MAC tables for HP Aruba
• Added collection of routing information for Cisco XR
• Added object-groups support for Cisco and HP Comware

Features - Visualization

• E2E Path & Site separation no longer reset the view upon close
• Width of the grouped links in the diagram is increased logarithmically according to the count
• Details in window components - The component can be moved outside of the screen and it will be minimized when it’s released outside of the screen
• Graphs - Hub meshing is now restricted to Tunnel and VLAN interfaces

Features - System

• Updated EoX reports for Cisco & Juniper
• Customer credentials are no longer needed for updates over the Internet

Features - Discovery

• Connectivity report - added a new report for Ambiguous or Incomplete command error
• Cisco WLC - added support for WLC unit type detection in HA
• Full BGP routing table handling - an Added setting which enables to skip downloading of BGP routes if the router has more BGP routes than the threshold

Improvements and Bug Fixes

• Cisco WLC APs without configured IP address will now appear in discovery with IP of 0.0.0.0
• Cisco NX-OS fixed parsing of environment variables
• Cisco SG300 switch port trunk VLAN parsing fix
• Cisco ASA - fixed parsing of SN when Chassis information is not available
• Fixed parsing for OSPF neighbors, neighbor ID can be device name.
• HP Aruba allows connecting AP to internal switch (fixing AP location)
• HP Comware 850 WLC - AP interface name and VRF fix
• HP Comware 7 fixed processing of L2 interfaces
• HP Comware - display license command is sent only for virtual platforms to get the SN
• Juniper JunOS fixed ethernetSwitchningInterfaceDetail parsing error when untagged VLAN is unavailable
• Juniper JunOS Command Route - updated parsing of access-internal routes
• Juniper JunOS Updated mapping for routing table (multi discard flag).
• Juniper JunOS fixed mapping for task SecureAccessPort
• Extreme XOS - fixed parsing of OS version
• Riverbed L3 interfaces fixed task mapping
• Fixed processing of CLI pagination for corner cases and improved detection
• Fixed CLI output download, which was not available in some cases
• Fixed Configuration Management scheduling component which didn’t remember the selected date(s) for Every week option
• Tasker - fixed memory overflow bug when finishing jobs (Topology build could fail in big network with multiple Full BGP routers)
• Updater would fail upon discovered of multi-homed AP with clients
• Diagrams - Grouped protocols had a wrong arrows direction
• Diagrams - Fixed shifted protocol labels in PNG Export
• Table Inventory / Hosts added PoE column (hidden by default)

2.2.5 (12th Jun 2018)

Features - Analytics

• Added STP pseudo-link between routers and switches not to rely on CDP/LLDP
• HSRP, VRRP, and GLBP are now under FHRP menu.
• Added preemption and protocol information to FHRP table.

Features - Protocol and technology support

• Added vendor support for Extreme XOS
• Added wireless support for HP830/850
• Added support for CISCO GLBP & VRRP
• Added support for Cisco ASA contexts
• Added voice gateway device type
• Added support for Cisco Nexus environmental parameters

Features - Visualization

• E2E Path lookup is part of Network graph now and displays the path over the network locations
• The tooltips are replaced with drag & drop windows which enable to display more valuable information directly in the graph

Features - System

• NIMPEE VM can now be restarted or shut down from System Administration interface
• System Administration - added option for restarting API
• New support portal - http://support.ipfabric.io/

Features - Discovery

• Significantly improved discovery error detection and reporting
• Detailed communication logs are now available in Connectivity Report / Error reports & in each table with Hostname detail (only for user with Settings privileges)
• XDP (Discovery Protocols) now consider only neighbors with capabilities "router" or ("switch" or "bridge" but excluding "phone" or "host")

Improvements and Bug Fixes

• Juniper/JunOS ARP records weren’t used as discovery targets

• Juniper/JunOS Zone FW is now collected from configuration (fixing 100% CPU BUG)

• Configuration management no longer attempts to download configuration of Wireless APs

• Forms with password field shouldn’t prefill a passwords

• LDAP authentication now supports multiple LDAP servers for a domain

• Firewalls are now included in the routing domain calculation

• STP between switch and router for site calculation and graphs

• Site recalculation - delete STP topology before start

• Voice GW 224 device type

• Added Vendor column to /inventory/hosts table

• Improved Cisco VRRP support

• Translated Cisco NX-OS routing protocol into a standard name

• DOWNLOAD configuration file in /technology/management/saved-config-consistency can’t be sanitized.

• Moved Table /reports/end-of-life-milestones to /inventory/end-of-life-milestones

• Local IP now inserted into ARP table for a platform which doesn’t show local ARP entries

• AP without CDP/LLDP is now connected to switch with pseudo-STP link

• Removed duplicate tables that served as dedicated checks, since now each table can have any number of checks using table colors (reports)./dashboard/risk/device-stability (now a color in /inventory/devices)/dashboard/risk/eox (duplicate of /inventory/end-of-life-milestones)/dashboard/risk/err-disabled (duplicate of /technology/interfaces/errdisabled)/dashboard/risk/outbound-balancing (duplicate of /technology/port-channels/outbound-balancing-table)/dashboard/risk/routing-stability (duplicate of /technology/routing/route-stability)/dashboard/risk/stp-stability (now a color in /technology/spanning-tree/stp-instances)/technology/addressing/host-ip (duplicate of /inventory/hosts)/technology/management/config-register (now a color in /inventory/devices)/technology/management/os-version-consistency (duplicate of /inventory/os-versions)/technology/management/unexpected-reloads (now a color in /inventory/devices)

• Fixed Cisco ASA parsing of empty localL4connections

• Fixed parsing of 802.1X details for Cisco IOS-XE

• Fixed parsing of auth sess int \ detail command for Cisco IOS-XE

• Fixed parsing of 802.1X client list and sessionId for Cisco IOS

• Fixed parsing of ARP entries for HP/Comware

• Fixed processing port security command for HP/Comware when it isn’t configured

• Fixed updater failing on validation of Zone FW rules

• Fixed discovery of Juniper/JunOS from ARP entries

• Fixed routing table flags parsing for Juniper/JunOS

• Fixed parsing of non-active routes for Juniper/JunOS

• Fixed ARP parsing of incomplete entries for Palo Alto

• Fixed parsing of Cisco policy-maps under certain conditions

• Fixed parsing of Cisco interfaces and IP interfaces under certain conditions

• Fixed parsing of Juniper/JunOS configuration firewall command

• Disabled sanitization of configuration files for Saved Configuration Consistency checks

2.2.4 (14th May 2018)

Features - Analytics

• End to End path lookups now enable to lookup any IP or Hostname directly from the source or destination field
• End to End path lookup now support L4 protocols and ports
• End to End path lookup now supports Zone Firewall rules
• Improved routing next hop analysis in the cumulative routing table
• Improved 802.1x analysis
• Added DNS resolution to hosts
• Added voice VLAN for VoIP phones

Features - Protocol and technology support

• Added support for Juniper SRX clusters (platforms)
• Added support for Firewall Zones (security)
• Added support for STP Guards (spanning tree)

Features - Visualization

• Small sites (less than 5 devices) are now grouped into redundant and non-redundant groups.
• Individual STP instances can now be hidden through Objects diagram menu
• L2/L3 boundary is now enhanced through MAC lookup between router and switch using VLAN, ARP, and MAC (now still marked as stp)

Features - System

• Added LDAP support for user authentication (supported Open LDAP, Microsoft AD)

Features - Discovery

• Discovery connectivity report now contains vendor column for connection attempts from ARP entries
• Discovery from XDP protocols now considers only neighbor with capabilities "router", "switch", or "bridge"
• SSH/TELNET authentication credentials can now be limited to a specific subnet

Improvements and Bug Fixes

• Significant performance boost for a historical snapshot comparison
• Fixed Cisco 6500 OS version detection for certain variants
• Fixed parsing of LLDP capabilities for Cisco SG
• Fixed inventory parsing of certain Catalyst 4500 Sup8 IOS-XE variants