IP Fabric v3.x.x

3.8.2 (1st July 2021)

OVA MD5SUM: 3E1B73F76140CBE5726129E3133D8022
OVA SHA256SUM: D9D71C6BACE7FA8AC9913FDD9B6F2ACBE743AB31218C0357BB7A271D0D1E6DE6

Features - Protocol and technology support

AWS - added data to the table Technology / Routing / VRF

Improvements

DNS name resolving, changed the way how we recognize if DNS server is available. Don't try to resolve public IP 8.8.8.8 but check if any nameserver is set
Snapshot management / Inventory table - allowed advanced filtering option
Tables help - API endpoint includes full URL including server name
Updated EoL records for Aruba CX
System / Advanced settings - Option "Saved configuration check" was removed - it can be controlled now from "Discovery Tasks" in advanced settings
Vendor API setting is part of snapshot settings now
Cisco IOS, IOS-XE and NX-OS - Added support for access-classes and transport methods on VTY lines to "technology/management/aaa/lines" table (as hidden columns Inbound ACL, Outbound ACL, Transport Input, Transport Output, Allow VRF login)
Transceivers statistics table - round delta low value to two decimal places

Bug Fixes

Arista EOS - fixed parsing of different output for command "show ptp masters"
Arista EOS - fixed parsing of different output for command "show ptp local-clock"
Aruba CX - Added support for Aruba OS 10.07 routing table output
Checkpoint Gaia - fixed API endpoint /show-gateways-and-servers errors - VSX clusters & checkpoint host objects
CheckPoint Gaia - fixed parsing of bandwidth information for command show virtual-system all
Cisco IOS - exclude OSPFv3 "authentication/confidentiality" IPSec tunnels.
Cisco IOS - fixed parsing for command show subscriber session all
Cisco IOS - fixed parsing of command show ip flow export in case flow export is disabled
Cisco IOS - fixed parsing of different output for command show interface switchport
Cisco IOS-XE - fixed parsing of platforms containing dashes in model name
Cisco IOS-XE - fixed transceiver detection
Cisco IOS-XE, NX-OS - fixed parsing of command show ptp brief in case of ports in 'INITIALIZING' status
Cisco IOS-XR - fixed parsing of different output for command show isis interface
Cisco IOS, IOS-XE, IOS-XR - fix parsing of command show ip route for routes installed years ago. Add parsing for routes pointing to Null0
Cisco IOS/IOS-XE - VRRP parsing fixed not to fail on IPv6 groups
Cisco SX - fixed platform and model detection
Dell PowerConnect - Fixed parsing of show show mac address-table command containing multicast addresses
Extreme Xos - changed STP Root and Bridge IDs parsing to contain only MAC address part
Extreme Xos - Fixed parsing of STP ports with asterisk from command show stpd <stpDomain> ports detail
Extreme XOS - RIB edges removed for local interfaces
Fix of bug "Invalid snapshot format" so snapshot wasn't able to load
Fix: Do not download the configuration file multiple times from the same IP address.
FRR - don’t show error if BGP/OSPF daemon is not running
FRR - fixed parsing of different output for command show version
HP ArubaSw - fix parsing of capabilities from show lldp info remote command
HP ArubaSw - fix parsing of command show interface brief in case interface does not have media type
HP ArubaSw - improved device model detection
HP Comware - Added support for interface status STP DOWN
HP Comware - fix parsing of command show ap bss-table to allow more values in phy column
HP Comware - fixed parsing of display interface command for the different output format
Huawei NE 8000 platforms - version detection fixed
Juniper JunOS - fixed parsing of command show spanning-tree statistics interface to support another output format
Juniper JunOS - fixed parsing of different output for command show route active-path
Juniper JunOS - fixed vrf leak to the main routing table (inet.0).
Juniper JunOS - Improve error message when the firewall isn’t able to provide output for cmd show security ike security-associations detail.
Juniper JunOS - Improve error message when the firewall isn’t able to provide output for cmd show security ipsec security-associations detail.
Juniper JunOS - MPLS forwarding tables collection fix
Mikrotik - fixed ipsec parsing for non-tunnel policies
Mikrotik - fixed parsing of interfaces which have an only numeric name
Palo Alto - Cluster state detection added. Fixes path lookup on duplicate IP on both nodes in the cluster.
Palo Alto - fixed tunnel proposals were not parsed correctly with long tunnel names
STP edges to Juniper SRX firewalls with virtual mac address fix
UI - fixed overflow of items from select boxes used in modals dialogs
Versa VOS - fixed mapping of API call /vnms/dashboard/appliance/site-a/live?command=arp/all.
Versa VOS - fixed mapping of API call api/config/devices/device/<appliance>/config/networks/network.
Versa VOS - fixed mapping of API call /vnms/dashboard/appliance/<appliance>/live?command=interfaces?deep
Versa VOS - fixed mapping of interfaces without MAC address.

3.8.1 (7th May 2021)

OVA MD5SUM: 7788D1E2E6A062F8FE3985A8644E9542
OVA SHA256SUM: 4E7FBA8DF01A787D93B8E6D0E3FE8AED68E3C9F6EABB3D162F84E1F99DADDD3D

Improvements

F5 BigIP - collect configuration from all partitions, not just from Common as was before.
Cisco IOS, IOS-XE, IOS-XR - add metric and passive properties to IS-IS Interfaces table

Bug Fixes

SSH connections could have timeouts on login
Arista EOS - fixed parsing of show system environment all command in case there are N/A values
Cisco ASA - Fixed parsing of snmp location
Cisco IOS - fixed parsing for command show flow exporter
Cisco NX-OS - fixed parsing for command show flow exporter
Juniper JunOS - routing table - fixed parsing of MPLS labels
F5 BigIP - new cmd show sys cluster all-properties to add cluster management interfaces to interface list.
Palo Alto IPSec - fixed parsing of tunnels with long names and multiple proposals

3.8.0 (26th April 2021)

OVA MD5SUM: 2f693acf59d9f31d28507c7edc58234f
OVA SHA256SUM: 2b208eb7584fd5b4708ea56a7f1688f4bf44624c872ef0d6b792576e88f9ff00

New Vendor Support

Added support for Aruba CX
Added support for Checkpoint Gaia Embedded platform
Added support for AWS - Discovery, inventory and routing support for VPC, transit gateway, VPN gateway, nat gateway
Added support for Versa VOS - basic discovery process

Features - Protocol and technology support

Cisco ACI - Added NTP support
Cisco ACI - DTEP collection added
- Tables located at Technology / SDN / ACI / DTEP
Added Multi-Chassis LAG support for Arista EOS and Extreme XOS
- Tables located at Technology / PortChannel / MLAG
Arista EOS - added support for VARP (Virtual-ARP)
- Table located ar Technology / FHRP / Virtual Gateways
Arista EOS - added PoE support
Arista EOS - added support for environment information
Cisco NX-OS, IOS-XE, Arista EOS - The Precision Time Protocol support added
- Tables located at Technology / Management / PTP
Cisco IOS, IOS-XE: Add support for PPPoE
- Tables located at Technology / Interfaces / PPPoE

Improvements

Table Technology / Platforms / Cisco VSS / Chassis - add column Chassis SN
More precise parsing of platform identifier for Cisco Catalyst series
VLAN topology calculation improved for mismatched designatedPortId and opposite side portId using xDP
Juniper, Palo Alto - add vrf leak support to the routing table.
Cisco WLC-AIR - improved pagination handling - backspace is sent to display an additional page of command output
Table Inventory / Interfaces - added columns about Transceivers (if exist, SN, PN, Type - 3 of them hidden by default)
Table Technology / Security / IPSec / Tunnels - added column "Interface description"
Table Technology / Security / IPSec / Gateways - added column "Interface description"
Table Technology / Platforms / Stacks / Stack Ports - For stack technologies that use regular ports for the stack, a new column with a list of stack interfaces added.
Table Technology / Interfaces / Transceivers / Statistics - added column with delta between Value and Low
System / Settings / Advanced / Vendor API settings - each setting can be enabled / disabled
When the application will lose connection with the server then is shown "Connection lost" overlay
Juniper JunOS - filter out VRRP backup virtual IP from the managed IP list
Managed duplicate IP table - removed for:
- Aruba AP - /32 IP on tunnel interfaces taken from another interface
- Versa - Internal IP
- IPv4 link local addresses 169.254.0.0/16
- Loopback addresses 127.0.0.0/8
The End Of Live database has been updated for Vendors (Cisco, HP, F5, PaloAlto, Arista, Extreme)

Bug Fixes

Fix UI - table filters lost when URL is used after authentication
Arista EOS - added parsing of interface load and fixed interface counters parsing
Arista EOS - fix the mapping of multi-lane transceiver physical interface names
Arista EOS - fixed empty ip address of admin shutdown interfaces
Arista EOS - fixed parsing of bandwidth information for command "show ip igmp snooping group"
Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
Arista EOS - fixed parsing of different output for command "show ip igmp snooping groups"
Arista EOS - fixed parsing of empty output for command "show ptp local-clock"
Arista EOS - remove non-existing Router interfaces from Interface inventory
Arista EOS - sometimes show the wrong VRF for admin shutdown interface, fixed.
Arista EOS - Spanning tree with MLAG - PeerEthernet ports removed.
Avaya/Extreme VOSS - Uptime with years fix
CheckPoint Gaia - error about missing router ID was shown even if BGP was disabled
Checkpoint Gaia - fixed parsing of different output for command "show cluster members interfaces all"
Cisco - fix parsing switchport mode dot1q-tunnel
Cisco - Fixed parsing show running-config command - line password with spaces.
Cisco - remove non-existing Sup-Eth interfaces from Interface inventory
Cisco ACI - fixed parsing of different output for command "show coop internal info ip-db"
Cisco ACI, NX-OS - fixed parsing of interface description.
Cisco ASA - fix parsing of not configured tunnels
Cisco ASA - fixed parsing of different output for command "show crypto ipsec sa"
Cisco ASA - fixed parsing of different output for command "show crypto isakmp sa detail"
Cisco IOS - Allow PIM RP without groups
Cisco IOS - fix duplex and media type for C1700
Cisco IOS - fix parsing of command "show ip igmp snooping mrouter" in case there are no ports configured
Cisco IOS - fix parsing of large output from "show mac address-table multicast"
Cisco IOS - fixed parsing of different output for command "show lldp neighbors detail"
Cisco IOS - fixed parsing of output for command "show ip igmp interface"
Cisco IOS - HSRP - fixed preemption detection
Cisco IOS-XE - BGP - fixed address family detection
Cisco IOS-XE - fixed parsing interfaces without outDrops counter
Cisco IOS-XE - fixed parsing of different output for command show ap name <apName> wlan dot11 5ghz/24ghz
Cisco IOS-XE fixed STP interface - VLAN mapping (TwoGigabitEthernet and AppGigabitEthernet)
Cisco IOS-XE WLC - Fixed parsing for interfaces with "invalid" as a value for speed
Cisco IOS-XE WLC - fixed parsing of different output for command "show wlan summary"
Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
Cisco IOS, IOS-XE and IOS-XR - Routing table parsing fixed
Cisco IOS, IOS-XE, ASA - fixed interface mapping in IPSec task.
Cisco IOS, NX-OS - use the full form of commands to avoid ambiguous commands - "show spanning-tree summary", "show spanning-tree detail", "show port-channel summary", "show etherchannel-summary"
Cisco IOS/IOS-XE - Fixed LLDP neighbors parsing in case output is split to 2 lines
Cisco IOS/IOS-XE - VRF name parsing fixed to disregard ending semicolon (if it is present)
Cisco NX-OS - added FEX info to inventory
Cisco NX-OS - fixed false-positive error emit in case "show monitor session all" contains information that destination port is in use in other span.
Cisco NX-OS - fixed parsing for command "show fex detail" for cases fabric port for control traffic is not provided.
Cisco NX-OS - fixed parsing of different output for command "show vrrp detail"
Cisco NX-OS - XDP links for LLDP protocol might have not been created in some cases
Cisco NX-OS- fixed parsing of show running configuration with some specific banner configured.
Cisco SG - fixed interface parsing in ARP table
Cisco SG - fixed LLDP neighbors detection in multiline output
Cisco SG - fixed parsing of different output for command "show sflow configuration"
Cisco SG - fixed parsing of different output for command "show spanning-tree detail"
Cisco SG 500 - fixed STP interface - vlan mapping (slash format)
Cisco XE - fixed xSR platforms identification
Cisco XR - fix parsing for command 'show version' (caused empty hostname)
Dell Powerconnect - fixed version detection for switches N2048
Extreme VOSS - fixed LLDP neighbor parsing
Extreme XOS - added reason for administratively down ports
Extreme XOS - Fixed STP parsing for multirow vlans output
Extreme XOS - Fixed STP parsing for PVST+ mode
Extreme XOS - transceivers task execution enabled
Fortinet FortiGate - fixed missing description in Interface Inventory table
HP Aruba - fixed parsing of details for AP which come down during discovery
HP Arubasw - fixed detection of model
HP Arubasw - Fixed error handling for LLDP neighbor with wrong format of Chassis ID
HP Arubasw - fixed mac-address collecting on some models
HP Arubasw - fixed parsing of different output for command "show interface brief"
HP Arubasw - fixed parsing of different output for command "show interfaces transceiver detail"
HP Arubasw - fixed parsing of different output for command "show interfaces transceiver"
HP Comware - fix parsing ARP table for platform 5130
HP Comware - fixed parsing of different output for command "display clock"
Huawei VRP - fixed parsing of different output for command "display info-center"
Huawei VRP - Fixed ARP parsing in case (SIP/DIP) is shown
Huawei VRP - fixed interface clearing time parsing
Huawei VRP - Fixed parsing for empty mirroring groups
Huawei VRP - fixed parsing of different output for command "display mac-address"
Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
Huawei VRP - fixed parsing of empty output for command "display dhcp snooping"
Huawei VRP - VXLAN Tunnels - command parsing fix when empty output is received
Juniper JunOS - Configuration parsing fix for "protect protocols mstp" command
Juniper JunOS - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
Juniper JunOS - fixed parsing of different output for command "show chassis environment"
Juniper JunOS - fixed parsing of different output for command "show chassis routing-engine"
Juniper JunOS - IGMP groups fix mapping of 'never' value for expires for
Juniper JunOS fix false-positive err-disabled statuses
Meraki - L2 interfaces, reason "connecting" added
Palo Alto - an interface that wasn’t associated with any VSYS could be missing in the interface inventory
Palo Alto - collect list of VRFs from show commands instead of configuration
Palo Alto - collect transceivers only for interfaces of the currently processed virtual system
Palo Alto - fixed missing routing tables on single vsys firewalls
Palo Alto - fixed parsing of command "show vpn gateway" with multiple DH groups
Palo Alto - fixed parsing of different output for command "show routing route"
Palo Alto - fixed parsing of different output for command "show vpn flow"
Palo Alto - fixed vendor bug where the sessions keep open even the connection is correctly closed. Using "exit" cmd for disconnection.
Vlan topology calculation - Virtual mac used in switch ID for Cisco Nexus fix

3.7.6 (8th March 2021)

OVA MD5SUM: a47d9983d046f74a34a17f5025cb7bd8
OVA SHA256SUM: c5972d44b012ff3b3411ea3c6666651e9c6c453a50009c0062df99c11ae29e0b

Improvements

Add support for Cisco Firepower 9000 series SM-24
Add indexes to speed up several DB queries
Table Technology / Routing / BGP / Neighbors - added "Local interface" column
Palo Alto - show also unconfigured ports in IPF
Cisco Meraki - Zx Teleworker Gateways - extended support for interface and routing table discovery (to gather this information Zx teleworker gateways processed pretty much the same as MX firewalls).

Bug Fixes

Pathlookup - IGMP snooping fail fix
Juniper - IRB L3 interface correct VLAN ID assignment
Fortinet FortiGate - zone firewall could be missing in some cases since the unit was considered as a HA slave
Palo Alto - first configured vsys could be missing in discovery result
Cisco FTD - fixed detection of service objects with names matching ICMP options keywords

3.7.5 (22nd January 2021)

OVA MD5SUM: b4c940832cbd592f2653553d72f11f33OVA SHA256SUM: c16cbac6040e7d07d04c42142ddbb42acc0547c912d726efa1bd1138a58f5be4

Features - Protocol and technology support

Palo Alto - add port channel support

Improvements

API Requests rate limiter counts only unresolved requests
Cisco ACI routing edges establish improvements.
Cisco NX-OS - Added Route-Target information for VRFs in BGP process
Fortinet FortiGate - added support for emac-vlan interfaces
Huawei - All send commands expanded to the full syntax
Table Technology / Interfaces / Transceivers / Inventory - added L1/L2 state columns
Frontend - implement request rate limiter

Bug Fixes

CheckPoint Gaia - fixed processing of zone firewall services (DCE-RPC, port ranges)
Cisco ACI - an unsupported show run command is no longer downloaded
Cisco ASA/FTD - L3 interfaces ‘local’ IPs are no longer derived from static ARP entries
Cisco IOS - fixed parsing of bandwidth information for command "show policy-map interface"
Cisco IOS - fixed parsing of different output for command "show mac-address-table multicast"
Cisco IOS - fixed parsing of different output for command "show standby"
Cisco IOS - Fixed showRun parsing for sections aaa, SNMP
Cisco IOS-XE - command "show wireless client mac-address \ detail" - filter out clients without ap.
Cisco IOS-XE WLC - improved parsing and overall wireless AP processing capabilities to better handle erroneous command outputs
Cisco IOS, IOS-XE - fixed parsing of source interface for AAA servers.
Cisco NX-OS - fixed parsing of different output for command "show interface transceiver details"
Cisco NX-OS - fixed parsing of different output for command "show spanning-tree mst"
Cisco NX-OS, IOS-XE - fixed parsing of different output for command "show version"
Cisco NX-OS/ACI - L3 interfaces ‘local’ IPs are no longer derived from static ARP entries
Cisco SG - Fixed ambiguous commands
Cisco SG - Fixed parsing of interface name (SG 500)
Documentation - the report was broken when the text included Unicode characters
Establishing BGP neighborship improved based on VLAN
Establishing RIB neighborship between ACI and FW improved based on VLAN and neighbor protocol
Fortinet FortiGate - fixed missing MAC addresses on all interfaces if the modem was active
Fortinet FortiGate - L2 data for some of the interfaces could be missing, L2 state could be wrong in some specific cases
Fortinet FortiGate - show only IP addresses from the active (virtual) cluster member
HP Aruba switch fix parsing of hostname
HP Arubasw - fixed parsing of different output for command "show vlans"
HP Arubasw - fixed parsing of different output for command "show lldp info local-device"
HP Comware - fixed parsing of different output for command "display arp"
HP Comware 1910 - fixed version detection
HPE V1910 - Fixed platform detection
Juniper JunOS - fixed parsing of different output for command "show igmp group"
Juniper JunOS - IRB L3 interface correct VLAN ID assignment
Juniper JunOS - STP - VLAN specific information parsing fixed for VSTP
Palo Alto - list only L2 interfaces that belong to the processed virtual system
Pathlookup - Device connected to ACI LEAF fix
Pathlookup - Transit search with tunnel fix (tunnel destination IP is now used)
System Administration - allows restarting of Discovery services
Technology / Addressing / Managed IP - table "DNS name match hostname" and "DNS (A/CNAME record)" columns did have correctly set failed status.
The Discovery process may be stuck when Tacacs is overloaded - fixed

3.7.4 (21st December 2020)

Improvements

Topology calculation - virtual mac calculation optimized
Discovery - Summary of Issues is refreshed every 5mins (from 1min) to prevent DB overload
Optimized DB queries for Discovery - Summary of issues

3.7.3 (17th December 2020)

Features - Protocol and technology support

Cisco ACI - add support for OSPF
CheckPoint Gaia - added support for VSX firewalls and switches

Improvements

Checkpoint Gaia - use the default Router ID for BGP if it isn’t explicitly configured
HP Aruba - (Technology / Wireless / Radios / Radios-detail) improve wlans mapping when AP is in monitoring mode
Palo Alto - add rebuild property to version.
Palo Alto - add support of fqdn objects in Zone FW.
Pathlookup - Application of ACL and zone firewall for MPLS links.
RIB topology - Down interfaces used as a source for unnumbered interfaces filtered from the calculation.

Bug Fixes

Arista EOS - fix parsing of IP route table when IP routing is disabled
Arista EOS - fixed parsing of different output for command "show ip route vrf \"
CheckPoint Gaia - fixed mapping of different output for API endpoint "/web_api/show-gateways-and-servers"
Cisco ACI - fixed parsing of different output for command "show coop internal info ip-db"
Cisco IOS - fixed parsing of different output for command "show mpls forwarding-table detail"
Cisco IOS - fixed parsing of different output for command "show vrf detail"
Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
Cisco IOS-XR - VRF-based routing information parsing fixed
Cisco NX-OS - ACL with IPV4 syntax added
Cisco NX-OS - fixed parsing of different output for command "show mpls switching"
Cisco NX-OS, IOS-XR - fixed parsing of different output for commands "show hsrp", "show hsrp detail", "show vrrp detail"
Cisco SG - dot1x related commands parsing fixed
F5 BigIP - fix "show sys hardware" failure in version detection
Fixed Device type detection - One non-connected route is enough for router
Fortinet FortiGate - fixed missing VIP groups in zone firewall
Fortinet FortiGate - fixed parsing of different output for command "show firewall service group"
HP Arubasw - fixed parsing of different output for command "show trunks"
HP Comware - fixed parsing of different output for command "display device manuinfo"
Huawei - Fixed ambiguous commands for arp, dhcp snooping, sflow, port-mirroring
Huawei - MPLS to RIB transport label mapping - 3 implicit null label removed
Juniper JunOS - fixed parsing of different output for command "show vlans detail"
Juniper JunOS - show route active-path command parsing updated and fixed
Palo Alto - fixed parsing of different output for command "show config merged"
Pathlookup - MPLS - nexthop without IP secondary lookup in VRF added
Pathlookup - Multiple NH with different link type fix

3.7.2 (3rd December 2020)

Improvements

Cisco - IP disabled or unconfigured interfaces excluded from saving into L3 interfaces table (IPv4, IPv6)
API POST /discovery/trigger-config-backup - config backup is possible to execute via API no matter on trigger setting
Routing protocols and RIB neighborship establishment improvement for unnumbered IP with help of xDP
Speed of topology calculation has been improved for networks with a lot of XDP records

Bugfixes

Arista EOS - fixed parsing of different output for command "show ip ospf interface"
Arista EOS - fixed parsing when the device returns empty string for command "show ip ospf interface"
Arista EOS - fixed parsing when the device returns an empty string for command "show logging"
Cisco ACI - Edge switch calculation fix (precedence from endpoint table on a leaf over ARP on other devices)
Cisco ACI - Leaf to switch VLAN topology fix for same access VLAN for two different PI VLAN (caused discovery finish calculation fail on the unique index).
Cisco ACI - Switch to leaf L2 path VLAN translation from access VLAN to PI VLAN fix
Cisco IOS - fixed parsing of different output for command "show crypto ikev2 sa detailed"
Cisco IOS - fixed parsing of different output for command "show standby"
Cisco SG/NX-OS - power supply & fan information processing fixed
F5 BigIP - doesn’t run cmd "list /sys management-ip" on vCMP guests, it doesn’t return any value on this platform.
Fortinet FortiGate - fixed parsing of different output for command "show firewall address"
Fortinet FortiGate - fixed parsing of different output for command "get system status"
Fortinet FortiGate - fixed processing of policies with service ALL in zone firewall
Fortinet FortiGate - neighbor relationships fixed on VDOM links
HP Aruba - fixed parsing of different output for command "show ap port status ap-name \"
Huawei VRP - fixed parsing of different output for command "display sflow"
Huawei VRP - fixed parsing of different output for command "display transceiver verbose"
Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
Huawei VRP - Mac address table, add bridge domain number to interface if missing
Juniper JunOS - fixed parsing of different output for command "show configuration | display set | except "^deactivate""
Juniper JunOS - fixed parsing of different output for command "show configuration security policies | display set"
Juniper JunOS - fixed parsing of different output for command "show ethernet-switching interface"
Juniper JunOS - fixed parsing of different output for command "show lldp neighbors interface \"
Juniper JunOS - fixed parsing of different output for command "show security ipsec security-associations detail"
Juniper JunOS - fixed parsing of different output for command "show security ipsec security-associations detail"
Juniper JunOS - fixed parsing of different output for command "show vlans detail"
Mikrotik RouterOS - fixed parsing of different output for command "/ip neighbor print detail"
Palo Alto - transceivers - "show system state filter-pretty sys.s*.p*.phy command" parsing fixed
Palo Alto - Zone FW - fix parsing of shared firewall objects on multi vsys systems.
UI - Settings / Discovery Tasks - button Test in Firefox submit a form (save action) instead of Test action
Pathlookup - Route to switched interface fix to apply only on SVI interfaces.
Switch to router VLAN topology calculation - fix for number of MAC addresses limitation
Bridge domain VLAN topology calculation - fix for recalculation

3.7.1 (24th November 2020)

Features - Protocol and technology support

Palo Alto - add support for Syslog

Improvements

The login into the platform was slow - rewritten DB query for GET /snapshot endpoint
Rewritten DB query to speedup post-discovery topology calculation
Technology / Security / Zone firewall / Interfaces - format data in Zone column (separate multiple zones by space)
Cisco IOS-XE - command "show interfaces transceiver detail" - added handling for Cisco bug CSCuw38988 (version 03.07.05E & platform cat3k_caa)
Fortinet FortiGate - check whether a VDOM still exists before switching to it
HOTFIX - Meraki API processing is disabled when the snapshot is started from graphs

Bug Fixes

Arista - transceivers - parsing fixed and extended
Aruba, Palo Alto - Fixed NTP server parsing when specified by FQDN
Checkpoint API data wasn't download on add new devices to the snapshot - fixed
CheckPoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
CheckPoint Gaia - run command "show security-gateway memory statistics" (if available) instead of "fw ctl psat" which is deprecated
Cisco - IP unnumbered addresses mapped to L3 interfaces
Cisco ACI - Too long VRF name over multiple lines parsing fix for "show system internal epm vrf all"
Cisco ASA - fixed parsing of different output for command "show crypto ipsec sa"
Cisco ASA - fixed parsing of different output for command "show crypto isakmp sa detail"
Cisco IOS - fixed parsing of different output for command "show crypto ipsec sa"
Cisco IOS - fixed parsing of different output for command "show ip route"
Cisco IOS - fixed parsing of different output for command "show vlan brief"
Cisco IOS - multicast MAC address table - parsing updated to support IOS based routers
Cisco IOS XR - fixed platform and model detection for NCS series
Cisco IOS-XR - Bundle-Ethernet interface name standardization (Bundle-Ether, BE in different outputs, now all is BE).
Cisco IOS-XR - Device had incorrectly assigned IP addresses from EVPN ARP records
Cisco IOS-XR - routing table next hop with vrf leak parsing fix
Cisco IOS/XE - fixed parsing of different output for command "show lldp neighbors"
Cisco WLC-AIR - allow device discovery even if not possible to determine device platform and model
Fortinet FortiGate - fixed parsing of different output for command "diagnose firewall fqdn list"
Fortinet FortiGate - fixed parsing of different output for command "diagnose netlink aggregate name \"
Fortinet FortiGate - fixed parsing of different output for command "diagnose vpn tunnel list"
Fortinet FortiGate - fixed parsing of different output for command "show firewall vip"
HP Arubasw - fixed parsing of different output for command "show cdp neighbors detail"
HP Arubasw - fixed parsing of different output for command "show logging server"
Huawei ambiguous commands fix - display mac-address, display interface, display device manufacture
Huawei VRP - ARP - Vlan parsing fix when the record is over multiple lines.
Huawei VRP - fixed parsing of different output for command "display mpls ldp adjacency verbose"
Huawei VRP - fixed parsing of different output for command "display mpls lsp verbose"
Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
Huawei VRP - fixed parsing of different output for command "display vxlan vni"
Huawei VRP - Task VXLAN - Device without VXLAN configuration error fix
Juniper JunOS - fixed parsing of different output for command "show chassis environment"
Juniper JunOS - fixed parsing of different output for command "show chassis routing-engine"
Palo Alto - fixed parsing of different output for commands "show vpn *"
Palo Alto - fixed parsing of different outputs for command "show config pushed-shared-policy vsys \"
Transceivers statistics table - fixed data for threshold columns
Transceivers thresholds and errors tables - show only transceivers with some data

3.7.0 (9th November 2020)

OVA MD5SUM: 0b44008d783224387c9c894a61a33701OVA SHA256SUM: 8a3805704b6f4b126d960e3953749f936c67e635d94d387d86ddea6ecf4ea8fc

Features - Protocol and technology support

Adds IPSec support for the following platforms
- Cisco IOS, IOS-XE, ASA
- Juniper JunOS
- PaloAlto
- Mikrotik
Adds detailed IPSec technology tables
- Tunnels (/technology/security/ipsec/tunnels)
- Gateways (/technology/security/ipsec/gateways)
Adds Zone-Based Firewall support for the following platforms
- Palo Alto
- Checkpoint Gaia
Adds Transceiver support for the following platforms
- WARNING: Transceiver information collection is intentionally disabled by default due to frequent bugs associated with reading transceiver status. Please make sure with vendor support about presence of such bugs in your code, or contact our support for best practices.
- Cisco ACI, ASA, FTD, IOS, IOS-XE, IOS-XR, NX-OS, WLC
- Arista EOS
- Extreme XOS
- Fortinet FortiGate
- HP Arubasw, Comware
- Huawei VRP
- Juniper JunOS
- Palo Alto
Juniper JunOS - Adds support for IGMP snooping
Huawei - Adds support for MPLS LDP
Huawei - Adds support for MPLS
Huawei - Adds support for BGP EVPN
Huawei - Adds support for L2 VXLAN
Huawei CloudEngine - VBST for version 8 improvement, all STP data are now collected
Cisco NX-OS - Adds support for VRRPv3
Cisco IOS-XE - Adds collection of stack information for switches with platform cat9k_lite
Settings / API Tokens - API Access Tokens allows you to use IPF API easily and secure
Settings / Webhooks - Webhooks enable you to send notifications to web applications in response to events in IP Fabric platform.
Settings / Advanced / Discovery Tasks - possibility to exclude specific tasks from the discovery process
Settings / Advanced / SSH / Telnet - possibility to set custom port for protocol and subnet

Image

Added tcpdump package
Installation system wizard - Self-signed certificate with one letter country prevented to start all web services. Fixed with the requirement for two-letter country

Improvements

Pathlookup - Hairpin routing support added
Pathlookup - Do not create host L2 edge to edge switch if the host is connected to FEX
Pathlookup - ACI endpoint lookup - fix of the search when COOP on the spine was introduced in 3.6.0
Pathlookup - ACI default GW with non-ACI edge switch, VLAN mapping based on access encapsulation VLAN ID
Pathlookup - ACI routing on second POD LEAF with endpoint connected fix (VNI from the first POD removed)
Pathlookup - ACI LEAF to switch connection fix
Pathlookup - L2 vxlan multiple tunnel endpoints fix
Pathlookup - ACI host to more LEAFs connected fix
Pathlookup - Routing proxy spine with multiple VTEP fix
Pathlookup - two labels stack processing on PE (PHP disabled)
Pathlookup - VXLAN L2 host connected to VTEP over switched network
Pathlookup - implicit null label 3 for Huawei support
Access-lists - new port translation from name to number added (DHCP, DNS)
Arista VEOS - add model detection for CVX
Cisco ACI - virtual vlan L2 interfaces with connection to L2 stp domain added
Cisco 6500 & 7600 - IGMP snooping support improvement
Cisco Firepower - NTP is now executed on all versions but by default disabled in Discovery tasks settings
Selected snapshot is remembered, will be automatically selected in browser new tabs.
F5 BigIP - new cmd "|list /sys management-ip" to add management interface to interface list
HP Comware - collect media for L2 interfaces
Huawei - L2 STP link added between bridge domain and neighbor switch
Palo Alto - management port support added (for VSYS system is placed into lowest-numbered VSYS)
Table Technology / Platforms / Environment / Power supplies - add column Device Model
Table Inventory / Devices - Column "Serial number" is renamed to "Unique serial number" (includes virtualization unique identifier - context/vsys/VDC etc). "Serial number" column now contains real SN reported by the device.
Table Technology / Multicast / MRoute table - add "Vendor", "Family" columns (as hidden by default)
Table Technology / Multicast / MRoute / OIL Detail - add "Vendor", "Family" columns (as hidden by default)
Table Management / Discovery History - the records are updated only for new snapshot, not for snapshot load.
Table Technology / Platform / Stacks / Members - uptime fixed to show members uptime instead of master
Table Technology / Platform / Stacks / Stacks - new columns Lowest and diff uptime
Table Technology / FHRP / Group state - column version added for HSRP and VRRP
Table Help - the request payload formatted to valid JSON. Added button for payload & URL copy.
OSPF Area always formatted as an IP address
API - added route for device config backup triggering
- POST /v1/discovery/trigger-config-backup (payload is JSON with IP or SN property)

Bug Fixes

Arista - fixed parsing of different output for command "show lldp neighbors detail"
Arista - fixed parsing of different output for command "show vrf"
CheckPoint Gaia - add cluster virtual IP addresses to the interfaces
CheckPoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
Cisco 9800 WLC - Fix parsing when wireless client with "excluded" status is contained in output
Cisco 9800 WLC - fixed parsing of different output for command "show wireless interface summary"
Cisco ACI - fixed parsing of different outputs for command "show coop internal info ip-db"
Cisco ACI - Some show interfaces have 0000.0000.0000 mac, bia is taken instead
Cisco ASA - fixed parsing of different output for command "show run"
Cisco ASA Firepower - Platform detection improvement for 4000 and 9000 platforms.
Cisco Cat9K platforms - fixed parsing of show version output without stackwise
Cisco Catalyst 3K & 9K - Total output drops bytes/packets handling (CSCve59640).
Cisco IOS - add correct parameters to the command "show storm-control" on Cat4500 platforms
Cisco IOS - fixed parsing of different output for command "show lldp neighbors"
Cisco IOS - fixed parsing of different output for command "show run"
Cisco IOS - fixed parsing of different output for command "show udld"
Cisco IOS - VSS - Current state time not provided for CAT4500 fix (removed as required property)
Cisco IOS - VSS - Four supervisor chassis fix
Cisco IOS - VSS - VSL link output from both switches fix
Cisco IOS 6800 - fixed parsing of different outputs for command "show mac address-table multicast"
Cisco IOS XR - fixed parsing of different outputs for command "show ntp associations"
Cisco IOS-XE - fixed parsing of different output for command "show run"
Cisco NX-OS - CDP capabilities includes phone, so it was wrongly classified as phone.
Cisco NX-OS - device model is taken from "show inventory"
Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping groups"
Cisco NX-OS - OSPF interface fix for unnumbered interface
Cisco NX-OS - PIM with unnumbered interfaces fix
Cisco NX-OS fixed parsing of different output for command "show cdp internal global-info"
Cisco NX-OS fixed parsing of different output for command show ip bgp vrf all all nei
Cisco NX1000v - don't execute unsupported cmd "show cdp internal global-info"
Cisco SG - fixed hostname detection
Cisco SG - fixed parsing of different outputs for command "show interface status"
Extreme Boss - fixed parsing of different output for command "show arp-table"
Extreme Boss - fixed parsing of different output for command "show lldp neighbor-mgmt-addr"
Extreme Boss - fixed parsing of different output for command "show lldp neighbor"
Extreme Boss - fixed parsing of different output for command "show mac-address-table"
Extreme Boss - fixed parsing of different output for command "show port-statistics"
Extreme Boss - fixed parsing of different output for command "show running-config"
Extreme Boss - fixed parsing of different output for command "show vlan interface info"
Extreme Boss - fixed parsing of different outputs for command "show ip"
Extreme Boss - fixed parsing of different outputs for command "show mlt"
Extreme BOSS - fixed parsing of different outputs for command "show spanning-tree stp \ port vlans"
Extreme BOSS - mac address table parsing fixed (caused discovery stuck). Fix in library common for more vendors, so this was possibly affecting more vendors
Extreme Boss - MSTP port role fix for stack
Extreme Boss - VLAN interface fix for stack and ports without vlans
Extreme Voss - fixed parsing of different output for command "show ip vrf"
Fortinet FortiGate - fixed collecting device info
Fortinet FortiGate - Mac address mapping to aggregate and VLAN interfaces (fixes path lookup L2 edge between switch and FortiGate)
Fortinet FortiGate - Prompt detection for VDOM with more than 11 characters fix
Fortinet FortiGate - Zone firewall fixes for load balancing VIP
HP Aruba - fixed parsing of different output for command "show ap port status ap-name \"
HP Aruba - fixed parsing of different output for command "show lldp neighbor interface \ detail"
HP Arubasw - fixed model detection on stack switches
HP Arubasw - fixed parsing of different output for command "show ap details ap-name \"
Huawei VRP - ARP table entries with L2 interfaces mapped to L3 interface to fix path lookup issues
Huawei VRP - BGP - Address family in VRF recognition fix
Huawei VRP - fixed parsing of different output for command "display lldp neighbor"
Huawei VRP - fixed parsing of different output for command "display mac-address"
Huawei VRP - fixed parsing of different output for command "display memory"
Huawei VRP - Route summary for VPN instances (VRF) fix
Juniper JunOS - DHCP bindings for private VLANs without VLAN ID
Juniper JunOS - don’t run discovery on secondary nodes.
Juniper JunOS - EX3400 sn parsing fix
Juniper JunOS - fixed parsing of different output for command "show ethernet-switching interfaces"
Juniper JunOS - fixed parsing of different output for command "show lldp neighbors interface \"
Juniper JunOS - fixed parsing of different output for command "show vrrp detail"
Juniper JunOS - IRB interface support in pathlookup
Mikrotik RouterOS - fixed showing duplicated L3 interface in case that both IPv4 and IPv6 address is configured
Palo Alto - fixed parsing of different outputs for command "show arp management"
Palo Alto - fixed parsing of different outputs for command "show interface management"
Palo Alto - Routing table collection in virtual systems fixed
Power supplies table - Missing SN can be taken from inventory if available
UI - Cron component - Sunday as an initial value wasn't selected

3.6.3 (10th September 2020)

Improvements

Cisco NX-OS and ACI - show inventory based chassis SN is the preferred device SN (otherwise show version based SN is used)

3.6.2 (9th September 2020)

Bug Fixes

Configuration Management - fixed getting config file using a parallel API requests
Configuration Management - fixed unexpected API failure when was used advanced filters in API request
HP Arubasw - fixed version detection on several platforms.

3.6.1 (17th August 2020)

OVA MD5SUM: B4F8C3DCA72657F8A38205D9B1C66626OVA SHA256SUM: 0FBC098CEE58B7A1F14C6D7DAB822E47788ED2ADB0074DBCC9F745CE7BBEF557

Improvements

Site Separation - Regex rule - Site Name field as select box where user can select already created sites or type a new site name
Device Explorer - added Model into device detail tab. Also added model column into all tables where exists "platform" column
Table Technology / Management / SNMP / Summary - added columns Vendor, Model
Table Technology / Networks / Managed Networks - added VLAN ID column
Table Technology / Platforms / Cisco VDC - added Device Explorer detail for column Device
Cisco IOS - don’t run unsupported storm-control commands on Cisco C45xx platform
Maintenance scheduling - added option WEEK and MONTH to allow scheduling to allow job execution on a weekly / monthly basis.
Connectivity Report - added MAC address column
F5 BigIP - added parsing for model and platform device properties.
Added DB index for speed up of table Technology / IP Telephony / Phones

Bug Fixes

LDAP - fixed user email when LDAP returns multiple email addresses for a given username
LDAP - fixed user authentication, domain suffix to be case sensitive
UI - Search for page - removed duplicate results for the same page
Jumphost - fixed different SSH prompt when the connection is established
Router to switch L2 STP connection fixed for port channel interfaces
Cisco ASA - fix platform detection for FPR models.
Cisco IOS-XE - fixed parsing of different outputs for command "show ip igmp snooping mrouter"
Cisco IOS, IOS-XE - fixed parsing of different output for command "show udld"
Cisco IOS, IOS-XE - VSS information collecting fix
Cisco IOS, IOS-XE - ACLs - added support for packet length option
Cisco IOS - fixed Storm Control for C65xx platforms in case that storm control limits are not set
Cisco IOS - fixed parsing of different outputs for command "show switch virtual redundancy"
Cisco NX-OS - fixed version detection for models NX-OSv
Cisco NX-OS - MDS switches and Nexus 1k Virtual Services Appliance servers are flagged as "Unsupported devices"
Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp interface"
Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping groups"
Cisco NX-OS - fixed parsing of different outputs for command "show cdp global"
Cisco NX-OS - fixed getting Fex Power Supply in fail/shutdown state.
Cisco IGMP snooping - parsing fixed for disabled IGMP processes on NX-OS and ACI
Fortinet FortiGate - don’t create xDP relation for VDOM links where both ends are in the same VDOM
Riverbed Steelhead - in some cases "show version" cmd did not provide model, in that case model is taken from "show info".

3.6.0 (1st August 2020)

OVA MD5SUM: 5E260AAA1E88BF4BD8523F0634FC3B4E
OVA SHA256SUM: 5933E36D0FE6CF8AAD22B8CDCF7EA00A90C0028D6D7CDDF85E005269419A4B34
Hyper-V MD5SUM: 634428E5722A53F87C4E0BD5C16F6285
Hyper-V SHA256SUM: 2556A6EB2C7B2DE7318E8FFF1787E5A63D5E5A54BFA1D72F3B416B60DBB8EF78

New Vendor Support

Extreme/Avaya - VSP switch family with VOSS basic discovery support added
Extreme/Avaya - ERS switch family with BOSS basic discovery support added
FRRouting - Added support for basic discovery

Features - Protocol and technology support

Device Explorer - Detailed view for each device
- When you click on hostname value in every table then you can see data from any other table where the data will be automatically filtered for that device.
Added summarized tables about device inventory. New tabs in Inventory / Devices:
- Vendors - Vendor overview in the whole network
- Families - Vendor / Family overview in the whole network
- Platforms - Vendor / Family / Platform overview in the whole network
- Models - Vendor / Family / Platform / Model overview in the whole network
New table Technology => VLANs => L3 Gateways - shows VLANs without L3 gateway
New table Technology => Platforms => PoE => Modules - shows PoE information per module
Cisco ACI - Multicast support added
Cisco ACI - Add support for FEX & environment
Cisco IOS, IOS-XE - UDLD support added - interfaces and neighbors tables
- Technology / OAM / UDLD
Cisco IOS, IOS-XE - VSS support added
- Technology / Platforms / Cisco VSS
Cisco IOS, NX-OS, HP Comware - Storm Control support added
- Technology / Interfaces / Storm Control

System

Jumphost - Intermediary Linux server with SSH can be used to forward IPF network discovery traffic. User credentials and SSH key for authentication are supported with multiple jumphosts.

Improvements

Site separation - the site separation was rewritten. The multiple rules can be defined, Regex rule can be without matching group.
Table Technology / Platforms / Stack / Connections - #Known members column added to filter false positive down states for provisioned switches.
Table Technology / Addressing / Managed IP - added column Vlan ID
Table Technology / Platforms / Stack / Members - added column Uptime
Table Technology / Addressing / Managed duplicate IP - Don't report duplicities for Cisco ACI and for "em%", "bme%", "avs%" interfaces
Table Inventory - Hosts: Added interface description into Edges column
Settings / OUI - added enable/disable for multi rows selection
ARP discovery - New OUI for HP/Aruba switches added
Neighbor protocols CDP/LLDP - deduplication of same neighbor improved
Intent Verification Rules - added icon for customized rules
Settings / Advanced / SNMP - added encryption passphrase into SNMPv3 settings
Arista EOS - collect average packet size for multicast routes
Cisco ACI - VTEP and VNI added to RIB for tunnel interfaces (to support forwarding to vtep from RIB)
Cisco ACI - COOP endpoint database collected on spines
Cisco Firepower FTD - L2 connection to switch fix, pathlookup will now show L2 path from/to FTD
Cisco NX-OS & ACI - local routes /32 are now parsed
Cisco NX-OS - fixed parsing of different output for command "show interface switchport"
Cisco Nexus FEX - support extended to better deal with possibly missing SN and model information in show fex detail command outputs
Cisco IOS-XE WLC - wireless AP MAC derivation changed to prefer MAC-based access point IDs over Ethernet port MACs to better match AP MACs provided by wireless clients
Cisco IOS & NX-OS - IGMP snooping groups modified to include mrouter ports
Cisco IOS & Arista - Mrouter port entries are inserted into snooping table when no receiver is present
Cisco IOS - BGP - add support for Cisco 7300
Cisco Firepower ACLs - added support for ‘trust’ action
L2 edge port classification improved - tunnel never can be edge port
Cisco Nexus - VPC pairs are now connected not only by domain but also must be CDP neighbors.
Neighbor discovery protocols improvements - Entries without IP processed, relationships established based on port id, chassis id etc.
Pathlookup - WLC detection improved for virtual IP on the management interface.
Multicast pathlookup
- Source MAC taken from any node if not found on connected node in ARP
- IGMP Snooping L2 path support added
- Vlan added to device forwarding summary table
Table Technology / Inventory / OS versions
- Performance improvement
- F5 included
- Palo Alto correct calculation fix

Bug Fixes

Pathlookup - Cisco FEX now correctly work in comparison between snapshots
Pathlookup - Own IP without local ARP entry on default GW fix
VLAN information is correctly saved even when STP is missing
Arista EOS - changed command for multicast routes counters for firmware version 4.23 and higher
Arista EOS - fixed version detection on virtual appliance (vEOS)
Arista EOS - remove duplicate route, route summary and arp records in vrf default. Fix missing vrf default in VRF task.
Arista EOS - fixed parsing of different outputs for command "show ip interface"
Cisco ACI - Endpoint table parsing fix for entries with missing flags
Cisco IOS & IOS-XE - show ip mroute vrf was on some platforms shortened and ambiguous.
Cisco IOS - fixed parsing of different outputs for command "show ip pim interface"
Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show ip pim neighbors", entries without flags
Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show ip mroute"
Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show interfaces"
Cisco IOS C3750 - fixed parsing of provisioned member switches in command "show switch detail"
Cisco IOS-XE - "show version" stack member parsing fixed
Cisco IOS XR - fixed parsing of different outputs for command "show cef vrf \ detail"
Cisco Meraki - if the proxy is configured then the connection use that proxy
Cisco NX-OS 5000 - fixed parsing of different outputs for command "show nve interface"
Cisco NX-OS 5000 - fixed parsing of different outputs for command "show nve vni"
Cisco NX-OS - fixed parsing of different outputs for command "show ip pim rp vrf all"
Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping"
Cisco NX-OS - fixed parsing of different outputs for command "show mac multicast parsing", repeated header in the output
Cisco NX-OS - fixed parsing of different outputs for command "show vlan brief"
Cisco NX-OS - fixed parsing of different outputs for commands "show ospfv3 neighbor detail"
Cisco NX-OS - Fixed wrong command for IGMP snooping groups
Cisco SG - fixed parsing of different output for command "show arp"
Dell PowerConnect - fixed parsing of different output for command "show interfaces status"
Juniper JunOS - fixed parsing of different outputs for commands "show multicast route extensive"
Juniper JunOS - fixed parsing of different output for command "show connections extensive"
Juniper JunOS - fixed parsing of different output for command "show virtual-chassis"
Juniper JunOS - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
Juniper JunOS - fixed parsing of different output for command "show lldp neighbors interface \"
Extreme Enterasys - fixed parsing of different output for command "show spantree stats active sid \"
Extreme XOS - fixed parsing of different output for command "show edp ports all detail"
Extreme XOS - fixed parsing of different output for command "show configuration"
Fortinet FortiGate - fixed switching between VDOMs
HP Arubasw - fixed parsing of different output for command "show ip"
HP Arubasw - fixed parsing of different output for command "show vlans"
HP Arubasw - fixed parsing of different output for command "show vlans ports all detail"
HP Comware - fixed parsing of different output for command "display arp"
HP Comware - fixed parsing of different output for command "display mac-address"
HP Comware - fixed parsing of different output for command "display stp region-configuration"
HP Comware - fixed parsing of different output for command "display interface"
HP Comware - fixed parsing of different output for command "display fan"
HP Comware - fixed parsing of different output for command "display ip netstream export"
HP Comware - fixed parsing of different output for command "display power"
Huawei VRP - fixed parsing of different output for command "display interface"
Huawei VRP - fixed parsing of different output for command "display dhcp snooping statistics"
Huawei VRP - fixed parsing of different output for command "display eth-trunk"
Huawei VRP - fixed parsing of different output for command "display device"
Huawei VRP - fixed parsing of different output for command "display current-configuration"
PaloAlto - fixed hardware SN for virtual systems

3.5.4 (18th June 2020)

OVA MD5SUM: 7BB3D18A74F6D36D94330416C8A5E856OVA SHA256SUM: 433B2001170341160275044DB430F1EF3F2ED2E1FA9C4E03A68F2A624B677510

Bug Fixes

Cisco Firepower - NTP disabled for version 6.5 and above due to Cisco bug CSCvt01938
HP Arubasw - prompt detection fixed - additional chars allow to appear in prompt

3.5.3 (9th June 2020)

OVA MD5SUM: 59D82DDADAD04C5F160D189A55B23B55
OVA SHA256SUM: 3FBA60725BC7261145759AE79DA8E38B54167141F755140D8F67699B5A7F1525

Improvements

Cisco IOS-XE - Add patch information into version
Cisco IOS-XE - show version parsing updated, stack task enabled for Cat9k and ct5760
End to End path - Gateway mac detection improved
Routing edges between devices improved - different VRF established if ARP and interface mac is available

Bug Fixes

End to End path - Multiple lookups on same node optimization fix
Arista EOS - fixed collecting of MAC table
Arista EOS - MAC multicast - missing multicast table fix
Arista EOS - IGMP snooping groups - flood support added
Cisco ASA/FTD - ACL evaluation fixed (for cases with inbound global ACL only)
Cisco ASA/FTD - "internal-only" interfaces are not parsed anymore (names like "Internal-Data", "Internal-Control" or "Virtual" with nameif "_internal_loopback")
Cisco IOS - fixed parsing of different output for command "show ip igmp snooping"
Cisco IOS - IGMP snooping - parsing fix for EOL comma, multiple versions, and different headers
Cisco IOS - MAC multicast - parsing fix for no ports or no VLAN entries, 6500 new header fix
Cisco IOS - fixed parsing of different outputs for commands "show ip pim rp vrf all" and "show ip pim rp mapping"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show wlan summary"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show wireless client mac-address \ detail"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name \ wlan dot11 5ghz"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name \ wlan dot11 24ghz"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap cdp neighbors"
Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name \ ethernet statistics"
Cisco IOS-XE - show version - stack member parsing fixed to deal with missing system sn
Cisco NX-OS - fixed parsing of different outputs for commands "show ip pim rp vrf all" and "show ip pim rp mapping"
Cisco NX-OS - MAC multicast - different platform heading parsing fix
Cisco NX-OS - MAC address table - VTEP IP parsing fixed
Cisco Nexus VPC - STP virtual bridge ID mac fix, CDP to establish STP links for virtual bridge ID is required.
Fortinet FortiGate - fixed parsing of different output for command "show system zone"

3.5.2 (1st June 2020)

OVA MD5SUM: 2985C13C8185B470F4BD65A05826FCA2
OVA SHA256SUM: 84CF13C1266B0FC690765C2E547C61DF9679DF2B4CEC023CBEB3DEA06F46220F

Features - Protocol and technology support

Arista EOS - Added AAA support
Juniper JunOS - add ISIS IPv6 neighbors support
Cisco FTD added support for AAA, ACL, NAT, NTP, Object groups, Routing table, SNMP, Syslog
Cisco IOS, IOS-XE, NX-OS & Arista - New IGMP Snooping and mac multicast tables
- Technology / Multicast / Mac table
- Technology / Multicast / IGMP Snooping / Vlans Configuration
- Technology / Multicast / IGMP Snooping / Global Configuration
- Technology / Multicast / IGMP Snooping / Groups
Cisco IOS, IOS-XE, IOS-XR, NX-OS & Arista & Juniper - Add info about PIM Rendezvous Points (RP) and Bootstrap servers
- Technology / Multicast / RP / Overview
- Technology / Multicast / RP / BSR
- Technology / Multicast / RP / Mappings
- Technology / Multicast / RP / Mappings Groups

Improvements

Settings - Advanced - new setting for discovery tasks
- The discovery process can be limited only to devices that were already discovered in the past.
- The number of tasks for discovery process can be also limited by "What information is used to identify neighbors"
Pathlookup - Multicast over unreachable transit support added.
Mikrotik RouterOS - remove syslog messages from command output + fixed processing of tunnel interfaces
Table Technology / Management / AAA / Servers - added columns "Destination hostname", "Config name" - (hidden by default)
Table Technology / IP Telephony / Phones - added columns "Vendor"
Cisco Nexus - Mroute table counters (incoming packets and avg. packet size) added
Cisco Nexus - routes with "pending only" parameters are not put into the routing table
Cisco FTD - uptime parsing fixed for device in failover cluster (device uptime is used now)
Added Voice VLAN parameter from Arista switchports.
Cisco ASA/FTD - added support for "show interface detail" command to better parse vlan IDs on interfaces (cmd "show interface" still kept as backup cmd)
Host-to-gateway - STP instance added not only based on ROOT ID (can be same for virtual mac) but also STP domain ID.
CSV export - export is limited to 2M rows to improve performance. We will introduce a separate Export job in the near future

Bug Fixes

Managed duplicate IP false positive removed for
- VXLAN virtual address
- VXLAN source loopback address
Fixed detection of some entry-level FortiGate models (e.g. 30D)
Unable to discover Meraki with automated snapshot
Enable discover HP ProCurve in the stack
The user with read privileges could update intent verification rules.
Arista EOS - fixed collecting of multicast routing table for all VRFs
Arista EOS - fixed parsing of different output for command "show vlan"
Arista EOS - fixed parsing of different output for command "show ip ospf neighbor detail"
Arista EOS - fixed parsing of different output for command "show port-channel summary"
Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
Arista EOS - collect PIM commands for all configured VRFs
Cisco ASA - fixed parsing of different output for command "show context"
Cisco NX-OS - fixed parsing of different output for command "show ip igmp group vrf all"
Cisco NX-OS 9000 - MTU information is now taken from port configuration instead of QoS policy.
Cisco IOS - fixed parsing of different output for command "show ip vrf"
Cisco IOS-XE WLC 9800 - fixed parsing of different output for command "show wireless client summary"
Cisco Firepower Threat Defense - fixed mapping of mac address table
Extreme XOS - get ARP records from all vr
HP Comware - fixed parsing of different output for command "display dhcp-snooping packet statistics"
HP Comware - fixed parsing of different output for command "display device manuinfo"
Huawei VRP - fixed parsing of different output for command "display bgp peer"
Huawei VRP - fixed parsing of different output for command "display bgp peer verbose"
Juniper JunOS - fixed parsing of different output for command "show ldp neighbor extensive instance \"
Juniper JunOS - fixed parsing of different output for command "show spanning-tree bridge detail"
Juniper JunOS - fixed parsing of various output for command "show interfaces terse"
Juniper JunOS - fixed parsing of different output for command "show configuration | display set"
Juniper JunOS - fixed parsing of different output for command "show ethernet-switching interface"
Juniper JunOS - fixed showing of RPs in multicast routing table
Huawei VRP - fixed parsing of different output for command "display ospf peer"
Palo Alto - fixed parsing of different output for command "show arp all"
Cisco IOS-XE WLC 9800 - fixed parsing of different output for command "show ap summary"

3.5.1 (20th April 2020)

Features - Protocol and technology support

New multicast first-hop routers table - all routers which have connected sources ( Technology / Multicast / MRoute / First hop router)

Improvements

Improved system update procedure
- Allow downloading logs from an update process
- Progress bar for manual package upload
At the user's request, we increased CLI session timeout to a maximum of 600s (Warning: a high timeout can significantly prolong the discovery time)
Cisco ASA - ACLs and object groups - added support for ‘names’

Bug Fixes

Graph protocols - VXLAN VTEP sessions with virtual IP fix
Pathlookup - Default GW - prefer devices with host ARP entry
Pathlookup - Vxlan multiple router lookup in different VRF fix
Pathlookup - Encapsulation into VXLAN first edge RIB tunnel fix
Pathlookup - Multicast sources and receivers in snapshot comparison fix
Pathlookup - Multicast source connected to multiple routers with same mac is now represented by one source
Pathlookup - Multicast source and first-hop routers detection improved
Pathlookup - Multicast forwarding - do not send back from to incoming interface included in OIL
Multicast sources table - (*, G) false entries removed
Mikrotik RouterOS - in some cases getting xDP neighbors could fail (fixed)
Arista EOS - parse transceivers information from command "show inventory"
Arista EOS - parse transceivers information from command "show port-channel dense"
Arista EOS - fixed parsing of different output for command "show ip ospf interface"
Arista EOS - fixed parsing of different output for command "show ip route"
Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
Arista EOS - several multicast fixes regarding PIM neighbors & interfaces, IGMP
Cisco - showRun - parsing fixed and extended (ASA AAA, IOS NAT)
Cisco IOS-XR - fixed parsing of different output for command "show route summary detail"
Cisco IOS-XR version 5 - fixed OSPF task mapping, add new commands "show ospf interface", "show ospf vrf all interface"
Cisco IOS-XR - several multicast fixes regarding PIM neighbors & interfaces, IGMP
Cisco IOS-XE - WLC 9800 - fixed parsing of different output for command "show version"
Cisco Firepower Threat Defense - fixed mapping of L2 management interface
Cisco NX-OS - fixed parsing of different output for command show ip bgp vrf all all neighbor
Cisco NX-OS - fixed parsing of different output for command "show nve vni"
Cisco NX-OS - several multicast fixes regarding PIM neighbors & interfaces, IGMP
Cisco Nexus - correctly detect "Error: AAA authorization failed for command" as Authentication fail error
Cisco Meraki - added support for 'failed' interface state, counters load parsing extended
Cisco SG - fixed parsing of different output for command "show system"
Cisco IOS-XR - fixed parsing of different output for command "show system"
Cisco WLC - fixed parsing of different output for command "show ap wlan 802.11a \"
Cisco WLC - fixed parsing of different output for command "show ap wlan 802.11b \"
Juniper JunOS - several multicast fixes regarding PIM neighbors & interfaces, IGMP
Juniper JunOS - fixed remote IP’s mapping of CCC with long LSP names
Juniper JunOS - fixed parsing of different output for command "show connections extensive"
Palo Alto - fixed missing routing table on some of devices
CDP/LLDP - Meraki neighbor parsing fixed

3.5.0 (1st April 2020)

OVA MD5SUM: A129A0FD9359105E9C637ADC332459AE
OVA SHA256SUM: 9A3713121B9072882F8332618594F4BAB566697D52544FEBB737DAD528321203
Hyper-V MD5SUM: 698E5DF7D7A945EE2FABCA4DA1EA845C
Hyper-V SHA256SUM: 29E185591D87B327B50D791F8916C6FC08C399984C5AE392902E9EF6418EA8F3

Features - Protocol and technology support

Add support for Cisco Meraki (REST API provides limited set of information)
- Setup REST API connection at Settings / Advanced / Vendors API
Add support for L2VPN technologies: CCC, VPWS and VPLS. (Cisco IOS's, Juniper)
- Tables in Technology / MPLS / L2 VPN
Add support BGP over IPv6 for Cisco XR
Add support for Multicast (IGMP, PIM, MROUTE) for Cisco IOS, IOS-XE, IOS-XR, NX-OS, Arista EOS, Juniper JunOS
- Tables in Technology / Multicast

Features - System

Techsupport file - added option to make database dump without devices data (only system tables + settings)

Improvements

Technology / FHRP tables improved to be VRF aware
CSV export - removed first line with "sep=;" and escape all value (stop forcing auto-format in excel
Pathlookup
- MPLS explicit null label support added
- MPLS swap and push label support added
Count of total rows for some table can be a big performance problem, so this feature is disabled for some tables. "unknown" is used instead of total rows.
- Technology / MPLS / L3 VPN / PE Routes
Juniper JunOS - Get import/export route targets to VRF from policies

Bug Fixes

Configuration management - syslogTrigger option didn't work, fixed
Tables - fixed updating of rule for Advanced Filters
Techsupport page - fixed issue when techsupport failed, then the UI still displayed that the process is in progress
Host to gateway - fixed Host in VRF
Arista EOS - keep domain name in hostname
Arista EOS - fixed mapping for VXLAN task
Arista EOS - fixed parsing of different output for command "show interfaces"
Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
Arista EOS - fixed parsing of different output for command "sho ip bgp neighbor vrf all"
Arista EOS - fixed parsing of different output for command "show ip bgp neighbor"
Cisco IOS-XE Catalyst 9000 - fixed parsing of stacking information
Cisco ASA - fixed parsing of different output for command "show ipv6 interface"
Cisco ASA - fixed parsing of different output for command "show run"
Cisco ASA - fixed parsing of different output for command "show route", add name alias to IP mapping
Cisco ASA - fixed parsing of different output for command "show run all object"
Cisco ASA - fixed parsing of different output for command "show ipv6 ospf neighbor detail"
Cisco IOS - fixed parsing of different output for command "show vrf detail"
Cisco IOS - fixed parsing of different output for command "show ip protocols"
Cisco IOS/IOS-XE - fixed parsing of capwap interfaces
Cisco ASR9K/10K - show version parsing fix
Cisco IOS-XE cat3K - stack member without HW version and empty stack parsing fixes
Cisco IOS-XE - fixed parsing of different output for command "show monitor detail"
Cisco IOS-XE - fixed parsing of different output for command "show authentication sessions"
Cisco IOS-XE - fixed parsing of different output for command "show run"
Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding-table detail"
Cisco IOS-XR - fixed parsing of different output for command "show ospfv3 vrf all-inclusive neighbor detail"
Cisco IOS-XR - fixed parsing of different output for command "show ospf vrf all-inclusive neighbor detail"
Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
Cisco IOS-XR - fixed parsing of different output for command "show hsrp"
Cisco IOS-XR - fixed parsing of different output for command "show isis neighbor detail"
Cisco IOS-XR - fixed parsing of different output for command "show snmp host"
Cisco IOS-XR - fixed parsing of different output for command "show run"
Cisco IOS-XR - fixed parsing of different output for command "show ospfv3 vrf all-inclusive interface"
Cisco NX-OS - fixed parsing of different output for command "show ospfv3 vrf all neighbors detail"
Cisco NX-OS - fixed parsing of different output for command "show ipv6 interface vrf all"
Cisco NX-OS - fixed parsing of different output for command "show fex detail"
Cisco NX-OS - fixed parsing of different output for command "show ospfv3 vrf all"
Cisco NX-OS - keep domain name in hostname
Cisco NX-OS - try to use 2 different commands for routing table per VRF instance
Cisco SG - fixed parsing of different output for command "show system"
Cisco SG - fixed parsing of different output for command "show run"
Cisco SG - fixed parsing of different output for command "show interface switchport \"
Cisco SG - Secure access ports - port auth.state fix
Cisco WLC Air - fixed parsing of different output for command "show wlan \"
Cisco WLC Air - fixed parsing of different output for command "show port detailed-info"
Cisco WLC Air - fixed parsing of different output for command "show ap wlan 802.11a \"
Cisco WLC Air - fixed parsing of different output for command "show ap wlan 802.11b \"
Cisco WLC Air - fixed parsing of different output for command "show lag summary"
Checkpoint Gaia - fixed parsing of different output for command "show ospf interfaces detailed"
Extreme XOS - fixed mapping for L2 interfaces
Extreme XOS - fixed parsing of different output for command "show stpd detail"
Fortinet FortiGate - fixed parsing of different output for command "diag netl agg name \"
F5 BigIP - fixed parsing of different output for command "show cm device"
Fortinet FortiOS - fixed parsing BGP neighbors which are in active state for a long time
Fortinet FortiGate - Zone FW - FQDN address object couldn’t be found if it was defined with upper case letters
HP ArubaSW - fixed parsing of different output for command "show ap lldp neighbors"
HP Comware - fixed parsing of different output for command "display stp"
HP Comware - fixed parsing of different output for command "display wlan ap all verbose"
Huawei VRP - fixed parsing of different output for command "display ospf interface all"
Huawei VRP - fixed parsing of different output for command "display eth-trunk"
Huawei VRP - fixed parsing of different output for command "display lldp neighbor"
Huawei VRP - fixed parsing of different output for command "display snmp-agent community read"
Huawei VRP - fixed parsing of different output for command "display snmp-agent community write"
Huawei VRP - fixed parsing of different output for command "display ip routing-table vpn-instance \ statistics"
Huawei VRP - fixed parsing of different output for command "display ntp sessions"
Huawei VRP - fixed parsing of different output for command "display observe-port"
Huawei VRP - fixed parsing of different output for command "display esn"
Huawei VRP - fixed parsing of different output for command "display vrrp"
Huawei VRP - fixed parsing of different output for command "display mac-address"
Huawei VRP - fixed parsing of different output for command "display port-mirroring"
Huawei VRP - improved parsing for command "display ip vpn-instance" to support long names of VRF
Huawei VRP - "display device" and "display device manufacture-info" parsing fixed and extended to better support modular chassis
Checkpoint Gaia - improved OS version detection, support for new versions outputs.
Mikrotik RouterOS - fixed command to get bridge hosts table
Juniper JunOS - fixed parsing of different output for command "show lacp interfaces"
Juniper JunOS - fixed parsing of different output for command "show spanning-tree interface detail"
Juniper JunOS - fixed parsing of different output for command "show configuration security policies | display set"
Juniper JunOS - fixed getting VRRP group in idle state
Juniper JunOS - fixed parsing of different output for command "show vrrp detail"
Juniper JunOS - fixed parsing of different output for command "show interfaces statistics detail"
Juniper JunOS - fixed parsing of different output for command "show ldp neighbor extensive instance \"
Palo Alto - interfaces: n/a duplex and speed are not parsed as unknown but as n/a
Quagga - fixed parsing of different output for command "show bgp summary"
Quagga - fixed parsing of different output for

3.4.4 (11th March 2020)

OVA MD5SUM: EF151028D7F0DABFC556F87F3696E1C1
OVA SHA256SUM: 40449CAC066CF91A7934514DE870A86B5CDAD09D486C1863F8578259635E471A

Bug Fixes

Maintenance job - fixed memory leak in reading snapshots details.

3.4.3 (4th March 2020)

Improvements

Removed automatic sanitization for LDAP Settings
Added new option to disable LDAP nested groups for AD (speedup login process)
Added ldap-search tool into image for troubleshooting purposes

3.4.2 (27th February 2020)

OVA MD5SUM: 2B16E83667672944095CEC1BA6FCE92A
OVA SHA256SUM: 5652274E1678A40ADF03945F95FA174C0F06245CB213DB7CDBF9AD4FFDF65B40
Hyper-V MD5SUM: 43D8EDCDE98F7F176306B1529DDC32EE
Hyper-V SHA256SUM: AF8A6B44963C71E7FE28FB08D4D474FD2B18F93E17265C4F3CE5C6051984E017

Improvements

Added NGINX logs into techsupport file

Bug Fixes

LDAP Groups - the user groups are always determined using "member" and also using "memberOf" attribute, no matter on LDAP server type.
User management - fixed fail to create user with any capital letters
FIX API service isn't restarted when DB service isn't alive - only message in UI will be displayed
Cisco IOS - fixed parsing of different output for command "show crypto session brief"
Juniper - Add protocol isis parameter to cmd for route summary task (protection before downloading full bgp table)
Fixed several problems with Backup/Restore

3.4.1 (5th February 2020)

Improvements

Quagga Routing Suite - replaced command "show interfaces vrf all" with "show interfaces"
Quagga Routing Suite - replaced command "show ip route vrf all" with "show ip route"
Quagga Routing Suite - replaced command "show ip route summary vrf all" with "show ip route summary"

Bug Fixes

LDAP - fixed sanitization of DN information, improved LDAP logs
Arista EOS - fixed parsing of different output for command "show ip route \"
Arista EOS - fixed parsing of different output for command "show ip bgp neighbors"
Juniper JunOS - fixed parsing of different output for command "show version" - missing hostname in output

3.4.0 (28th January 2020)

OVA MD5SUM: 0eba4cf8e164ce267ce6edd0677f8dda

OVA SHA256SUM: 17d733e041c2726bc0dd74d88573f88525c0a3ba9cfbb65ad4faafe0de4ce7b0

Features - Protocol and technology support

Added support for Cisco Converged Access WLCs and "Next-Gen" WLCs 9800
Added support for Quagga Routing Suite
Added basic support for Virtual Systems on Palo Alto firewalls
New VRF tables (Technology => Routing => VRF)
- Summary - to get a quick overview of configured VRF in your network.
- Detail - configured VRF per device.
- interfaces - configured VRF on device and interface.
New L3 VPN tables (Technology => MPLS => L3 VPN)
- PE Routers in network
- VRF configured on PE routers with summary of routes in VRF
- Route targets import and export configured in VRF
- Routes on PE in VRF including originating source PE

Features - System

implemented LDAP groups - now is possible set permissions per LDAP domain group.
compare feature now working also for STP instances
FIX: L3 protocols edges disappeared after transit cloud expansion

Visualization

FIX: Positions of FEX's weren't correctly restored for next snapshot (or reloaded snapshot) - all views with FEX's have to be saved again after rearranging positions.
Pathlookup - Cisco ACI support added
Pathlookup - possibility to track packet path in specific VRF, including VRF auto detection.

Improvements

Added column Mac address into Technology => Management => Manage IP
Arista - ARP and RIB tables support for non-vrf devices
Arista - BGP and ISIS support for non-vrf devices
Cisco ASA cluster auto-generated MAC starting with A2 - when IP is learned from ARP, it’s included to discovery.
Fortinet FortiGate - added verstion detection for FortiGate with Wifi module
Snapshot Management - Settings detail can be closed on ESC
Juniper JunOS - VRRP groups were assigned to wrong subinterface. Now groups are signed properly.
End of Life table improvement - One summary table per unique PID, one detail table showing all PID and their SN
Technology / Routing / Summary - BGP, IS-IS, OSPF, OSPFv3 added VRF column
CLI Authentication - allow to save duplicate usernames
L2 Edge port - xDP protocols on void are removed from decisions process as they can lie with their capabilities (e.g. OPX send it’s router)

Bug Fixes

Fixed problem with resolving DNS names - some IP didn't have to be translated.
Arista - fixed missing native VRF in OSPF
Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
Arista EOS - fixed parsing of different output for command "show ip ospf neighbor detail"
Cisco ACI - Interface vlan mac address parsing fix
Cisco ACI - fixed parsing of different output for command "show vlan extended"
Cisco ASA routing table - nexthop IP to outgoing interface mapping fixed
Cisco IOS - fixed parsing of different output for command "show ip cef detail"
Cisco IOS - fixed parsing of different output for command "show mpls forwarding-table detail"
Cisco IOS - fixed parsing of different output for command "show spanning-tree mst"
Cisco IOS - fixed parsing of different output for command "show power inline"
Cisco IOS - fixed parsing of different output for command "show cdp neighbors detail"
Cisco IOS XE - fixed parsing of different output for command "show vlan brief"
Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
Cisco NX-OS - fixed parsing of different output for command "show nve vni"
Cisco NX-OS - fixed parsing of different output for command "show system internal l2fwder mac"
Cisco NX-OS - fixed parsing of different output for command "show logging server"
Cisco NX-OS - fixed parsing of different output for command "show interface switchport"
Cisco NX-OS - fixed parsing of different output for command "show environment fex all"
Cisco SG350 - fixed version detection
Cisco SG - fixed parsing of different output for command "show interface switchport"
Extreme Enterasys - fixed parsing of different output for command "show system"
Extreme Enterasys - fixed parsing of different output for command "show neighbors"
Extreme Enterasys - fixed parsing of different output for command "show lacp"
Extreme Enterasys - fixed parsing of different output for command "show port status"
Extreme Enterasys - fixed parsing of different output for command "show ip route"
Extreme Enterasys - fixed parsing of different output for command "show port counters"
Extreme Enterasys - improved version detection
F5 BigIP - fixed parsing of different output for command "show sys hardware"
FortiGate - fixed missing VIP address objects in FortiGate policies
Fortinet FortiGate - fixed parsing of different output for command "get router info ospf interface"
Fortinet FortiGate - fixed parsing of different output for command "get router info vrrp"
Fortinet FortiGate - fixed parsing of different output for command "show firewall policy"
HP ArubaSW - fixed parsing of different output for command "show trunks"
HP ArubaSW - fixed parsing of different output for command "show ip"
HP ArubaSW - fixed parsing of different output for command "show spanning-tree instance \"
HP ArubaSW - fixed parsing of different output for command "show interface all"
HP ArubaSW - fixed parsing of different output for command "show interface brief"
HP ArubaSW - fixed parsing of different output for command "show vlans ports all detail"
HP Comware - fixed parsing of different output for command "display mac-authentication"
HP Comware - fixed parsing of different output for command "display isis peer ver \"
HP Comware - fixed parsing of different output for command "display clock"
HP Comware - fixed parsing of different output for command "display mirroring-group all"
HP Comware - fixed parsing of different output for command "display link-aggregation verbose"
Juniper JunOS - fixed parsing of different output for command "show route active-path"
Juniper JunOS - fixed parsing of different output for command "show interfaces terse"
Juniper JunOS - fixed parsing of different output for command "show configuration forwarding-options sampling"
Juniper JunOS - fixed parsing of different output for command "show configuration interfaces | match sampling | display set"
Juniper JunOS - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
Juniper JunOS - fixed parsing of different output for command "show route active-path"
Juniper - SNMP & Logging parsing fix when deactivated part was in config
Juniper - fixed getting ACL from device configuration
Juniper JunOS - fixed route summary calculations, now corresponds correctly to number of routes in routing table
Juniper JunOS - BGP summary parsing fix

3.3.3 (10th December 2019)

OVA MD5SUM: 3849bcf518ac89ea987f70af48ed88fa

OVA SHA256SUM: cf360ee8379b73591a1c7790004e11aa49f02f1da5bdaa101a933d251a71f3b5

Visualization

Comparison of routing protocols in the graph was fixed - added links were not displayed
FIX: OSPFv3 edges weren't displayed

Improvements

Snapshot Management - Inventory tab - added column platform
Cisco ACI - RIB recursive lookup fix
Cisco IOS/XR - RIB to MPLS forwarding for global table improved
Cisco MPLS forwarding table parsing updated to better support per VRF aggregate labels

Bug Fixes

Discovery didn't work without any configured "enable" password
Snapshot locking / unlocking fix
Cisco IOS - BDI interface is standardized to BD so all outputs provides same interface name
FIX - Discovery process can be stuck (with enabled DNS resolving)
Cisco ACI - fixed parsing of different output for command "show vlan extended"
Cisco NX-OS - fixed ambiguous command for show routing table
Configuration Management worker - if serial number of the device included "/" character then the config file wasn't saved

3.3.2 (28th November 2019)

OVA MD5SUM: 351f8829c6a6d8106519958b60cc3074

OVA SHA256SUM: 422a095b590301074049b489722be1a03729d00401d4d4e73de483c2b12fe82e

Features - Protocol and technology support

PortChannel - added support HP ArubaSW
New table Management => Discovery History
- This table shows all discovered devices in history (no matter which snapshot is selected).

Visualization

Improvements

Settings - Advanced - System - Clear DB: Don't delete main inventory data table on keep settings option.
Pathlookup - Default GW selection - prefer arp entry over virtual address.
Pathlookup - Destination site behind transit cloud recognition improvement
HP Comware WLC - removed WLAN-DBSS interfaces
Snapshot Connectivity report - allow rediscover IP addresses what were excluded or weren't included before
Settings / Authentication / credentials list for CLI - added field to exclude specific CIDR ranges
Settings / Authentication / credentials list for enable commands - added include / exclude specific CIDR ranges, username

Bug Fixes

Management / Changes - the changes could be wrong after ADD or REFRESH actions in that snapshot
Diagrams - if the site was opened from network overview diagram then "single point of failure" or "Non-redundant links" didn't work
System - Backup - backup to FTP/FTPS server didn't work without directory specification
Add devices into snapshot - if the IP addresses were already tried before then it weren't inserted as a new tasks
Cisco NX-OS - fixed parsing of different output for command "show interface status err-disable"
HP ArubaSW - improved prompt detection
HP ArubaSW - MSTP fixed to use only enabled vlans on ports
HP ArubaSW - fixed parsing of different output for command "show cdp neighbors detail"
HP ArubaSW - fixed parsing of different output for command "show lldp info remote-device \"
HP ArubaSW - fixed parsing of different output for command "show lldp info remote-device detail"
HP ArubaSW - L2 interfaces - not all interfaces were correctly parsed
Juniper JunOS - fixed parsing of different output for command "show interfaces statistics detail"

3.3.1 (18th November 2019)

OVA MD5SUM: 962ebf98db27d514ec993a7e8d2c0735

OVA SHA256SUM: 18e5df2c5ab44756d790b47ced322a138a62dc075c81c4fbe4ffcfe786909e17

Features - Protocol and technology support

New table Technology => CDP/LLDP => Endpoints neighbors
- This table shows all endpoints found by XDP protocols.

Improvements

TechSupport & Snapshot Download is generated via API jobs and the result (link for download) will be in Jobs menu now.
- Those links will be there until user confirm it with X button (user can safely reload the page)
Allow to save credentials with empty username (for telnet purposes)
Discovery remember used protocol now and this protocol is preferred for next discovery (improved speed of discovery)
Improved "Save historical data" job which is run after discovery - precalculation of data is much faster now
- WARNING - all snapshots should be reloaded otherwise you will get false changes in Management / Changes tables.
Maintenance page is displayed also during job "Clean DB" - during this time API don't responding to any request returns HTTP status 503
Device hostname should be never empty - if command for getting hostname will fail, then we're getting hostname from CLI prompt
HP Aruba switches - MSTP mode detection improvement
WLC HP Comware - Wireless service interfaces WLAN-DBSS removed from discovery
WLC Aruba - Wireless service interfaces Aruba removed from discovery
Site Separation using regex - new button for result preview (optimization for big networks)
Discovery - processing of small snapshots will be much faster now

Bug Fixes

Fix for corrupted CLI log files
HP Aruba - hotfix for enable mode (sending enter for Username: prompt)
CDP/LLDP - Parsing fix of some AP and IP Phone reported interface. Improved aggregation of multiple CDP & LLDP entries from same device
Manual site separation - didn't work correctly for already loaded snapshot
Diagrams - fixed Cisco nx7000 wrong icon
Fixed cases where UI shown "[object response]" instead of errors
Settings - Advanced - System - Clear DB: The jobs weren't correctly rescheduled
Arista EOS - fixed Switchport on L2 interfaces
Arista EOS - fixed parsing of different output for command "show ntp ass"
Arista EOS - fixed parsing of different output for command "show ip dhcp snooping counters debug"
Cisco IOS & NX-OS - fixed parsing of different output for command "show ip dhcp snooping binding"
Cisco IOS & NX-OS - fixed parsing of different output for command "show ip dhcp snooping statistics"
Cisco IOS & NX-OS - "show vlan brief" support for long names and spaces in names added
Cisco IOS use "show vlan-switch brief" command (instead of show vlan which gives ambiguous command).
Cisco IOS / IOS-XR / IOS-XR - fixed ISIS system type L1/L2
Enterasys fixed device prompt detection
Enterasys minor fixes regarding CDP & LLDP bindings
F5 Big-IP - fixed parsing of different output for command "show cm device"
HP ArubaSW - fixed parsing of different output for command "show dhcp-snooping"
HP ArubaSW - fixed parsing of different output for command "show spanning-tree detail"
HP Comware WLC - client AP mac detection improved so it’s correctly tied to AP
Juniper JunOS - fixed parsing of different output for command "show vlans detail"
Mikrotik - fixed parsing of different output for command "/interface print detail"
Mikrotik - fixed parsing of different output for command "/ip route print detail"
Mikrotik - fixed parsing of different output for command "/system ntp client print"

3.3.0 (4th November 2019)

OVA MD5SUM: 5fe5fbba70252dcc60ed76a33ebb9eed

OVA SHA256SUM: 2dc27c1de2d3bb664359e9906cec80bf685bff0e6cb25c68f0933dfe29867f1c

Features - Protocol and technology support

Added support for Mikrotik routers (please read known issue https://ipfabric.atlassian.net/wiki/spaces/ND/pages/735248385/Mikrotik)
Added basic support for Enterasys vendor
Every snapshot has own settings which can be extended from global settings.
SSID Summary table for wireless (Technology / Wireless / Radios/BSSID / SSID Summary)
Vlan database collection with new vlan detail and summary tables
- Technology -> Vlans -> Device Summary - Number of VLANs configured per device
- Technology -> Vlans -> Device Detail - Detail for specific vlan and device
- Technology -> Vlans -> Network Summary - List of all vlans configured in network. Grouped by VLAN ID
- Technology -> Vlans -> Site Summary - List of all vlans configured on the site
Collecting information about DHCP snooping
- Technology -> Security -> DHCP Snooping

Visualization

Diagrams - display results from intent verification rules
Diagrams - Host to gateway & Pathlookup form - the last used values are remembered
Diagrams - Protocols can be expanded / collapsed on double click
Performance improvements - loading of graph should be faster
Comparing was improved to display changes for edges pointing into transit cloud + changes for interconnected sites edges (If the site have more than 400 unmanaged neighbors then it can't be compared)
If transit cloud have more than 100 devices then it can't be expanded.

Improvements

Improved network credential management - you can set expiration for credentials, more subnet for individual credential, update password.
Cisco ASA - object-groups added support for system pre-defined objects
Cisco Nexus - transceivers added to inventory.
Settings / Advanced / System - Clear DB - now you can choose if you want to keep settings or restore initial settings.
Settings / Advanced / SSH/Telnet - added new option to disable discovery using telnet protocol
Settings / Advanced / Maintenance - a new job which is necessary to run on daily to keep the system healthy (The job can be run also manually)
Reserved IPv4 prefixes are automatically excluded from discovery (0.0.0.0/8, 127.0.0.0/8, 224.0.0.0/4, 240.0.0.0/4)
Pathlookup - Gateway selection algorithm will consider only /8 and smaller networks.
Diagrams - don't navigate into overall network view when leaving or entering pathlookup or host2gateway mode

Bug Fixes

Configuration management didn't work correctly from 3.2.0 - the changes in settings wasn't applied without a service restart
CLI - pagination text wasn't correctly cleared from CLI output (bug introduced in 3.2.1)
Diagrams - options "Show edge" wasn't correctly restored for loaded view
Diagrams - The saved views with long names couldn't be deleted
Diagrams - Saved view (including ViewBuilder) keep the position of transit cloud
Discovery could stuck on stop action when scanner was enabled.
LDAP Authentication - new ldap admin didn't have set privileges correctly
LDAP Authentication - case sensitivity issue Fixed
Certification Authorities - fixed verification if uploaded file is correct certificate
Snapshot uploading - the second attempt to upload a snapshot leads to deleting a snapshot from the hard drive.
Downloaded snapshot what was later uploaded had a problem that the refresh or add new devices didn't work. Used CLI credentials were sanitized on download, the user is prompted to set new credentials now.
Inventory - Interfaces table: IP column, preferring virtual IP as first (previously virtual IP was not shown).
Arista EOS - fixed parsing of different output for command "show sflow"
Arista EOS - fixed parsing of different output for command "show ntp ass"
Arista EOS - fixed parsing of different output for command "show ip arp vrf \"
Arista EOS - fixed parsing of different output for command "show ip ospf nei det"
Arista EOS - fixed parsing of different output for command "show ip ospf interface"
F5 - Hostname for both devices in cluster was same. Now it's fixed, each member has correct hostname.
F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
HP Aruba WLC - duplicate client output fixed - it caused that no access point was saved (unique index duplicity)
HP Aruba switch - fixed parsing of different output for command "show mac-address"
Cisco ASA - fixed parsing of different output for command "show bgp summary"
Cisco ASA - fixed parsing of different output for command "show run"
Cisco IOS - startup config can be empty fix
Cisco IOS - fixed parsing of different output for command "show isis neighbor detail"
Cisco IOS - fixed parsing of different output for command "show dot1x all details"
Cisco IOS - fixed parsing of different output for command "show interface"
Cisco IOS-XR - fixed parsing of different output for command "show inventory all"
Cisco IOS-XR - fixed parsing of different output for command "show run"
Cisco IOS-XR NCS - inventory, hostname and SN fixes
Cisco NX-OS - fixed parsing of different output for command "show logging server"
Cisco NX-OS - fixed parsing of different output for command "show inventory"
Cisco NX-OS - fixed parsing of different output for command "show interface"
Cisco NX-OS - fixed parsing of different output for command "show monitor session all"
Cisco NX-OS - RIB HSRP entry removed from RIB edges
Dell FTOS - fixed parsing of different output for command "show ip interface"
Dell FTOS - fixed parsing of different output for command "show interface"
Dell FTOS - fixed parsing of different output for command "show ntp associations"
Dell Powerconnect - fixed parsing of different output for command "show interfaces status"
Dell Powerconnect - When "show system" hostname is empty, hostname is taken from prompt
F5 Big-IP - fixed parsing of different output for command "show sys tmm-info raw"
F5 Big-IP - fixed parsing of different output for command "list net trunk all-properties"
F5 Big-IP - fixed parsing of different output for command "list sys snmp all-properties"
F5 Big-IP - Recursive RIB interface lookup fix
F5 Big-IP - IP on L3 interfaces fix
F5 Big-IP - Duplicate IP in cluster as RIB nexthop fix (active node IP used)
HP Comware - fixed parsing of different output for command " display ip routing-table verbose"
Juniper JunOS - fixed parsing of different output for command "show ldp neighbor extensive instance \"
PaloAlto- fixed parsing of different output for command "show system resources"

API Changes

Following endpoints have changed 'vlan' column to 'vlanId', next new column added 'vlanName'
- /tables/spanning-tree/ports
- /tables/spanning-tree/instances
- /tables/spanning-tree/topology
- /tables/spanning-tree/neighbors
- /tables/spanning-tree/vlans

3.2.1 (19th September 2019)

OVA MD5SUM: 362052f0fc1cecb4c9fefcb0c0cd76e2

OVA SHA256SUM: 237754a2d2594c7ee096c6d90f00a7833bb8f6159e40bb9b5f303b5674d30ce6

Improvements

Cisco ACL - added support for more complex rules combining several service object-groups
HP Arubasw - LLDP information gathering extended to support switches not supporting "show lldp info remote-device detail" command

Bug Fixes

FIXED: Discovery process can be stuck
Pathlookup - Object groups on firewalls in path fix
Cisco IOS/IOS-XE - netflow version mapping fix
Cisco Nexus - Power supply fans are moved from Fans to Power supplies fans tab
Extreme XOS- fixed parsing of different output for command "show isis neighbors detail"
Juniper EX4300 - fixed parsing for "show version"
F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
F5 Big-IP - fixed parsing of different output for command "run util bash -c uptime"
F5 Big-IP - fixed parsing of different output for command "list sys snmp all-properties"
Fortinet - NTP task fixed for case when NTP is disabled and command "diagnose sys ntp status" is not available
HP Aruba switch - fixed parsing of different output for command "show system"
HP Comware - Interface with lag down state parsing fix
HP Comware - fixed parsing of different output for command "display fan"
FIXED: Riverbed: Uptime does not consider days, parameter is read incorrectly

- System - Disk expansion was not working properly in some cases - Juniper – Firewall Filters (ACLs) – QoS related actions like loss-priority, forwarding-class or policer are considered to be traffic allowing actions (i.e. permit actions). Actual traffic rate vs. policing max rate is not taken into account anyhow.

3.2.0 (10th September 2019)

OVA MD5SUM: 822ae7794b420242aa0d9db6dd2d62df

OVA SHA256SUM: 03073bc8ecedfac612354a1fbf1695e08808a75366cc433f5fc4d78641c02c60

Warning already loaded snapshot may not work correctly, they should be unloaded and loaded again.

Features - Protocol and technology support

Arista EOS - added support for PortChannel task
Cisco ACI - added support for discovering
- New tables in Technology => SDN => ACI
Cisco IOS - Added Flexible flow support
Dell FTOS (ver 8 & 9 only) - add support for discovering
Dell PowerConnect - add support for discovering
Fortinet FortiGate - Added MAC address tables support on transparent VDOMs and software switches
HP Aruba switch stacking support added

Visualization

Compare feature - allows compare topology changes between snapshots
Refresh data directly from the graph:
- New snapshot from devices in the view - allows you to create a network snapshot containing only devices in the view to quickly refresh data for troubleshooting, path lookup, or other purposes.
- Refresh devices in the view - refreshes and overwrites collected information in the current snapshot for devices in the view.
- Add devices into this snapshot - allows adding new devices into current snapshot in the same way as from snapshot management but directly from the diagram.
Site separation implemented in graphs - use drag&drop to move devices into new site (use CTRL/SHIFT to select multiple)
ViewBuilder
- Added "expand" icon to add all devices what are connected to parent device
- Added "collapse" icon to remove all devices what are connected to parent device
- Multiple devices can be also selected with CTRL or SHIFT holding and those devices can be then added or removed from ViewBuilder view.

Improvements

Snapshot management - new snapshot allows to create snapshot with customized global settings
Snapshot management - Connectivity report - user can select specific IP addresses to rediscover them (only IP with status "stopped", "error")
Size of loaded or unloaded snapshot was decreased
Settings - Authentication - Notes can be set per credentials record
F5 BGP - devices with Virtual Clustered Multiprocessing (vCMP) should be correctly discovered (fixing error - Device already in queue)
HPE WLC - Exclude command 'display irf topology' - it may cause high CPU
Host table - removed Juniper’s localhost addresses
Zone FW policy processing updated to support multi-zone interfaces

Bug Fixes

Snapshot older than 3.1.0 couldn't be loaded
Visualization - IS-IS edges wasn't correctly restored for saved views, including ViewBuilder
Arista EOS - fixed parsing of different output for command "show vrf"
Arista EOS - fixed parsing of different output for command "show ip bgp neighbors vrf all"
Arista EOS - fixed parsing of different output for command "show ip rout vrf \"
Arista EOS - fixed parsing of different output for command "show vxlan address-table"
Cisco ASA - fixed parsing of different output for command "show ipv6 interface"
Cisco ASA - fixed parsing of different output for command "show route"
Cisco ASA - fixed parsing of different output for command "show context"
Cisco IOS 2960 NTP sources parsing fix
Cisco IOS - fixed parsing of different output for command "show snmp host"
Cisco IOS - fixed parsing of different output for command "show ipv6 interface"
Cisco IOS - fixed parsing of different output for command "show object-group"
Cisco IOS - do not run "show flow interface" command on devices where is no exporter (ambiguous cmd fix).
Cisco IOS-XE & IOS-XR MPLS forwarding table parsing fixes
Cisco IOS-XE - fixed parsing of different output for command "show ip cef vrf \ detail"
Cisco NX-OS - fixed parsing of different output for command "show run"
Cisco NX-OS - fixed parsing of different output for command "show object-group"
Cisco NX-OS - fixed Nexus 5000 interface MTU was wrong due to Cisco bug.
Cisco WLC - fixed parsing of different output for command "show run-config commands"
Cisco - fixed parsing of different output for command "show snmp user"
Checkpoint GAIA - fixed parsing of different output for command "show ospf neighbors detailed"
Checkpoint GAIA - fixed parsing of different output for command "fw ctl pstat"
Juniper - Corrected BGP neighbor uptime if the uptime is less than 60 minutes
Juniper JunOS - fixed parsing of different output for command "show vrrp detail"
Juniper JunOS - fixed parsing of different output for command "show ethernet-switching interfaces"
F5 Big-IP - fixed parsing of different output for command "show net trunk all-properties" (unsupported counters units)
F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
F5 Big-IP - fixed parsing of different output for command "show sys hardware"
F5 Big-IP fixed get uptime from TMSH
Fortinet FortiGate - fixed parsing of different output for command "diagnose sys ntp status" (IPv6 ntp sources)
Fortinet FortiGate - fixed parsing of different output for command "show firewall policy"
Fortinet FortiGate - fixed parsing of different output for command "show system interface"
HP Aruba switch - fixed parsing of different output for command "show tech buffers"
HP Aruba switch 2920 modules parsing fix
HP Aruba switch inventory parsing fix
HP Aruba switch - MST instance interface parsing updated to better detect disabled ports
HP Aruba - standalone access points are not supported, will be reported as "Can't detect version" - AP can be discovered only via controllers now
Huawei Vrp - fixed parsing of different output for command "display lldp neighbor"
Huawei Vrp - fixed parsing of different output for command "display stp"
Huawei Vrp - fixed parsing of different output for command "display ntp sessions"
Huawei Vrp - fixed parsing of different output for command "display vrrp"
Palo Alto - fixed parsing of different output for command "show interface \"
Palo Alto - fixed parsing of different output for command "show routing proto ospf interface"
Riverbed - fixed collecting information about memory & device platform
STP on portchannel to Cisco VSS fix
STP to transit for known neighbors fix
STP inconsistency - port vlan mismatch for router to switch connection fix
STP inconsistency - Ports with multiple neighbors, fix for Cisco VPC and switch to router connections.
STP inconsistency - CDP/STP port mismatch for router to switch connection fix
Bad device icon in graph - router with NVI interface is recognized as a router even without #routes > 1
RIB recursive lookup - fix for local IP on own interface in RIB when used for recursive lookup
Pathlookup - Router to switch connection, multiple next hop with different MAC on one interface fix

Changes

Syslog functionality has been reduced for triggering configuration changes only. IP Fabric no longer stores incoming syslog messages due to misalignment with product direction.

API Changes

Datatype changed for column vlanId from string to number in following endpoints
- /tables/addressing/arp
- /tables/interfaces/inconsistencies/details
Datatype changed for column vlan from string to number in following endpoints
- /tables/addressing/mac
- /tables/addressing/hosts
- /tables/reports/capacity/hosts
- /tables/reports/performance/users
- /tables/spanning-tree/neighbors
- /tables/spanning-tree/instances
- /tables/spanning-tree/ports
- /tables/spanning-tree/topology
- /tables/spanning-tree/vlans
Routes changes
- POST /start/discovery was replaced with:
  - POST /snapshots for starting a new discovery / creating a new snapshot
  - POST /snapshots/:key/devices for adding a new device
  - DELETE /snapshots/:key/devices for removing a device

3.1.2 (22nd July 2019)

OVA MD5SUM: 99e9f0518be8cc3a6bc662df89a91617

OVA SHA256SUM: c32f726930ffd80d9433888510315c8ed1d5509a3f70b2f98f34b3cab472ef50

Please be patient during the upgrade to IPF version 3.1.2, it may take longer than expected due to the migration of its ArangoDB from 3.3.19 to version 3.4.7.

Improvements

BGP - Added support for 4-byte ASN
User Interface Security - TLSv1.2 is now the only allowed HTTPS protocol
Network Assurance Dashboard loading speedup
Cisco WLC - Syslog related information is now parsed from "show run-config commands" instead of "show logging" which provided a lot of unnecessary data
Fortinet FortiGate - added support for any-any zone firewall policies
Juniper memory information is now taken from "show chassis routing" command instead of "show system memory"
F5 BigIp Improved prompt detection
Settings - Advanced - SSH/Telnet - Maximum number of parallel sessions can be limited to a single session (Warning: Discovery speed will be extremely slow)
Settings - Advanced - SNMP - Added support for multiple SNMP pollers in

Bug Fixes

Tables - CSV export - some columns may not have been exported correctly
UI - the tooltips sometimes left visible artifacts
UI - Inventory / Host table - could crash when it was stored with old settings
UI - Fixed selection of an item in the menu - Diagrams / Site Diagrams - Menu Inventory/sites was selected instead of Site Diagrams
Building network topology - could fail on deadlock in DB
Cisco ASA – ACL to L3 interface mapping fixed
Cisco ASA - fixed parsing of different output for command "show route"
Juniper – L2 interfaces and STP related information parsing fixed and updated. Command ‘show ethernet-switching interfaces detail’ is no longer used and was substituted by other commands including ‘show ethernet-switching interfaces’.
Juniper - discovery failed when root was used as username
Juniper VLAN parsing fixed to include even vlans with names starting and ending with double underscores.
Juniper - some platform did not correctly set IP as virtual
Juniper JunOS - fixed parsing of different output for command "show vlans detail"
Arista EOS - fixed parsing of different output for command "show lldp neighbors detail"
Arista EOS - fixed parsing of different output for command "show interfaces switchport"
Extreme XOS - fixed parsing of different output for command "show ospf interface detail enabled"
Extreme XOS - fixed parsing of different output for command "show edp ports all detail"
Fortinet FortiGate - fixed parsing of different output for command "get router info bgp neighbors"
Fortinet FortiGate - fixed parsing of different output for command "diag sys ntp status"
Fortinet FortiGate - fixed parsing of different output for command "diag hard dev nic \"
Huawei - fixed parsing of different output for command "display bgp \ \ peer verbose'"
Palo Alto - fixed parsing of different output for command "show ntp"
Palo Alto - L2 connection to switches fix
Palo Alto - routing table parsing fix
Palo Alto - L3 connection on cluster fix

3.1.1 (28th June 2019)

OVA MD5SUM: 1c8a3b4de12d9a2a3c15ceea4005080e

OVA SHA256SUM: 138b25ae8b4b1b1f29b6e01a2e15d619a0eddfd610fcbaa042a22a9a8b80f0e0

Bug Fixes

Snapshot Management - fixed cloning of snapshot
F5 BigIP - improved OS version detection

3.1.0 (27th June 2019)

Features - Protocol and technology support

Cisco Firepower Threat Defense - Added basic support
Fortinet FortiGate - added support for vDOMs (please follow our KB article)
Fortinet FortiGate - added support for Zone Firewall
Added PortChannel support for Fortinet/FortiGate (802.11ad only)
Added support for OSPF v3 (Cisco).
- Technology -> Routing -> OSPF v3
Added basic support of firewall policies on FortiGate firewalls (UTM security profiles, load balancing, NAT and user auth objects are not supported in this release)

Visualization

View Builder - enables to define custom views
Added OSPFv3 protocol
Improved object manipulation in the diagrams
Improved non-redundancy and single point of failure checks in the diagrams
Manual site separation replaced the previous method of site separation.

Improvements

Snapshot management
- Discovery page was merged with snapshot management
- Services logs are now included in the snapshot data file.
- Added ability to remove devices from the snapshot

Added Manual site separation (for now only from table) Inventory => Sites => Manual Separation

Host table speed up - the table is pre-calculated in the topology build process

The API documentation is now directly in UI
- Each table has API documentation accessible through the "?" button

Improved site separation by regex
- After regex separation is completed, all devices in the unknown site (not matched by regex) are moved to the site where they are directly connected, if such a connection exists.

Backup and restore have been rewritten from scratch. IP Fabric backup now supports incremental backup, local backup to separate datastore, DB restores, snapshot restore and full restore.

Backup has changed!
Please reconfigure your backup in Settings -> Advanced -> System. Restoring backup from versions earlier than 3.1.0 into version 3.1.0 must be done with the assistance of the support team. Alternatively, the earlier backup can be restored to a version 3.0.7 or older, and then the version can be upgraded to 3.1.0.

Added support for IP Fabric appliance monitoring via SNMP (CPU, RAM, storage, network)

Advanced Filtering
- Added new operators "is empty" and "is not empty" to able to filter for empty values
- Array datatypes is able to specify filtering rules for a specific item in the array or for all items in the array.

Path lookup - Protocol menu can now display available protocols according to the path

Path lookup - MPLS link type is now based on the presence of label stack

Path lookup - routing to connected devices (e.g. for WLC) is improved

Discovery - Multiple CLI credentials - system now remember what credentials works and these credentials will be prioritized for next attempt to connect to individual devices.

TechSupport file
- DB dump can be executed only for selected snapshot

Technology -> Routing -> IS-IS - added VRF column

Technology > Networks > Gateway redundancy - added VRF column

Cisco ASA - improved hostname for clusters & contexts

Cisco WLC - improved hostname for clusters

NTP - Cisco WLC sync unknown state added. NTP summary table now considers the unknown state as reachable and is not reported as a violation

Bug Fixes

Host to gateway graph - missing RIB L3 edge to gateway added
Host to the gateway - Host was not visible when connected to Cisco FEX
Path lookup - Connected routes VRF leak to BGP fixes (don't create RIB edge to transit, a route to connected network with a leak).
AP with GLPB gateway - RIB to all forwarders
Path lookup - ACL & Zone FW icons weren't displayed on the path
Discovery - Summary of Issues - Authentication errors - false/positive reports for this error could be displayed when was used multiple credentials
Discovery - Tasker process - fixed include/exclude list, sometime could be discovered IP addresses what wasn't in included or was in excluded list.
Juniper JunOS - fixed parsing of different output for command "show interfaces statistics detail"
Arista EOS - fixed mapping for Task STP - when STP is disabled on the device
Arista EOS - fixed parsing of different output for command "show mac address-table"
Arista EOS - fixed parsing of different output for command "show lldp neighbors detail"
Arista EOS - fixed parsing of different output for command "show ip interfaces"
Arista EOS - fixed parsing of different output for command "show ip ospf interface"
Arista EOS - fixed parsing of different output for command "show ntp ass"
Arista EOS - fixed parsing of different output for command "show vrf"
Cisco ASA - fixed parsing of different output for command "show route"
Cisco IOS-XE - fixed parsing of different output for command "show isis neighbor detail"
Cisco IOS - fixed parsing of different output for command "show environment all"
Cisco IOS - fixed parsing of different output for command "show run"
Cisco NX-OS - fixed parsing of different output for command "show spa detail"
Cisco NX-OS - fixed parsing of different output for command "show flow export"
Cisco WLC - fixed mapping for Task WLC Access points lists
Cisco WLC - fixed parsing of different output for command "show wlan \"
Cisco WLC - fixed parsing of different output for command "show ap stats ethernet summary"
Cisco WLC - fixed parsing of NTP
Extreme XOS - fixed parsing of different output for command "show stpd"
Extreme XOS - fixed parsing of different output for command "show log configuration"
HP Aruba - fixed parsing of different output for command "show ap debug system-status ap-name \"
HP Aruba - fixed parsing of different output for command "show system"
HP Aruba - fixed parsing of different output for command "show ap bss-table"
HP Comware - fixed parsing of different output for command "display ip interface"
Checkpoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
HP ArubaSW - fixed parsing of different output for command "show spanning-tree debug-counters instance \ ports all"
F5 BigIP - fixed parsing of different output for command "show cm device"
Fortinet FortiGate - fixed parsing of different output for command "diag hard dev nic \"
Fortinet FortiGate - fixed parsing of different output for command "get system arp"
Juniper JunOS - fixed parsing of different output for command "show spanning-tree interface detail"
Juniper JunOS - fixed parsing of different output for command "show configuration interfaces | match sampling | display set"
Juniper JunOS - fixed parsing of different output for command "show lacp interfaces"
Juniper JunOS - fixed parsing of different output for command "show ethernet-switching interface detail"
Juniper JunOS - fixed parsing of different output for command "show configuration | display set"
Juniper JunOS - fixed parsing of different output for command "show sflow"
Juniper JunOS - fixed parsing of different output for command "show lldp neighbors interface \"
Juniper JunOS - fixed parsing of different output for command "show interfaces statistics detail"
Juniper JunOS - fixed parsing of different output for command "show configuration forwarding-options sampling"
Juniper JunOS - fixed parsing of different output for command "show configuration firewall"
Site Low-level design report - table Interfaces in the HALF duplex was wrongly reported

3.0.7 (30th April 2019)

Features - Protocol and technology support

Extreme/Xos - EDP support added

Improvements

MPLS Cisco IOS, XR - VPN aggregate label support added
Routing table - VRF leak information added to next hop column
Connected routes leaked to other routing protocols are now removed from RIB edges (caused path lookup false routing to transit)
Path lookup - Support for VPN aggregate labels added
Path lookup - Support for multiple default gw (GLBP)
Path lookup - Possible ACL fail on switches with Cisco FEX fixed
Host to Gateway - If IP is a network device, show this device only
Path lookup - MPLS transit support added. For incoming MPLS interface from transit lookup in MPLS table based on prefix is checked.
Cisco IOS-XE - MPLS was not collected for 15.4 version, added

Bug Fixes

Manual site separation fixed, it didn't work in certain diagrams.
MPLS Cisco IOS - Nexthop mapping fix when only VPN label is present
Cisco Blade FEX modules - parsing of FEX related environment information fixed
Cisco MPLS forwarding with multiple next-hop including route and label fixed parsing
Juniper JunOS - fixed parsing issue for command "show vlans detail" - VPLS VLANs aren't supported
Juniper JunOS - fixed parsing for command "show sflow" when SFlow isn't configured
Juniper JunOS - fixed parsing of different output for command "show vrrp detail"
Juniper JunOS - fixed parsing of different output for command "show virtual-chassis device-topology"
Juniper JunOS - fixed parsing of different output for command "show virtual-chassis vc-port all-members"
Juniper JunOS - fixed parsing of different output for command "show spanning-tree interface detail"
Juniper JunOS - fixed parsing of different output for command "show spanning-tree statistics interface"
Juniper JunOS - fixed parsing of different output for command "show route active-path"
Fixed RIB edges with duplicate GLBP addresses for devices without ARP table (AP) or without
Checkpoint Gaia - fixed parsing of different output for command "show ospf interfaces detailed"
Cisco ASA - fixed parsing of different output for command "show bgp summary"
Cisco 6500/7600 routing table parsing fix - some entries were split into a new line in CLI output.
Cisco WLC - fixed parsing of different output for command "show port detailed-info"
Cisco WLC - fixed parsing of different output for command "show ap config general \"
Cisco IOS - fixed parsing of different output for command "show dot1x all details"

3.0.6 (10th April 2019)

Features - Protocol and technology support

HP/Aruba switch - STP support added

Improvements

UI - Added "Reload required" notification - when the system is updated the UI has to be reloaded. (A manual reload is still required at the moment, use CTRL+SHIFT+R)
System and application logs are now available in CLI (/var/log)
HP/Aruba switch - improved LLDP protocol parsing & mapping

Bug Fixes

FIX Critical BUG - when VM doesn't have a DNS server set, the discovery process can get stuck and a new discovery process can't be started.
Hosts table - Host DNS name column was always empty
Cisco IOS - fixed parsing of different output for command "show vrrp brief"
Cisco NX-OS - fixed parsing of different output for command "show monitor session all"
Cisco NX-OS - fixed parsing of different output for command "show flow export"
HP/Aruba switch - fixed parsing of different output for command "show lldp info remote-device detail"
Path lookup - flooding fix for virtual mac
fixed color report results refreshing when multiple snapshots are loaded
fixed various color reports patching scenarios (removing a rule, changing a color column)

3.0.5 (2nd April 2019)

Features - Protocol and technology support

Added BGP support for Checkpoint Gaia, Cisco ASA, Extreme XOS, Fortinet FortiGate, F5 Big-IP, Huawei VRP, Palo Alto
Added ISIS support for Arista EOS, Cisco IOS / IOS-XE / IOS-XR, Extreme XOS, HP Comware, Huawei VRP
Added STP support for Extreme XOS
Added Routing table support for Cisco WLC

Visualization

Path lookup for Wireless clients has been added for Cisco WLC.
Path lookup now supports Riverbed in path transparent mode with CDP/LLDP enabled.
Protocols menu - added new option "Hide unconnected devices", enabled by default.
Position of transit cloud is now correctly stored for loaded view.
Path lookup speed has been improved for large networks.
Path lookup - Protocol menu - all protocols that are in the path are visible by default.
Site separation - RIB edges for default gateway are now displayed automatically.

Discovery

Protocol relationship on with the same IP in multiple VRFs is now supported if VRF on both sides matches the name.

Improvements

Added version detection for HP1910 and 1950, including switch into CLI mode
Improved snapshot loading speed (depending on the number of available CPUs)
Spanning tree edge to router links are no longer created based on MAC for multiple destination ports.
AP on switch port is now recognized as edge port (based on incoming CDP message).
Cisco terminal server router now recognized as a router (based on serial sync/async interfaces), which was previously recognized as host.

Bug Fixes

Cisco WLC - fixed parsing of various output for command "show system interfaces"
HP Aruba - fixed parsing of various output for command "show inventory"
HP Aruba - fixed parsing of various output for command "show ap lldp neighbors"
HP Aruba switch - fixed parsing of various output for command "show tech buffers"
HP Aruba switch - fixed parsing of various output for command "show ip"
HP Aruba switch - fixed parsing of various output for command "show system"
HP Aruba switch - fixed parsing of various output for command "show vlans"
HP Aruba switch - fixed parsing of various output for command "show interface all"
Cisco - fixed parsing of various output for command "show run"
Cisco XR - fixed parsing of various output for command "show eigrp vrf all interfaces detail"
Arista EOS - fixed parsing of various output for command "show bgp neigh vrf all"
Extreme XOS - fixed parsing of various output for command "show ip-fix"
Juniper JunOS - fixed parsing of various output for command "show spanning-tree interface detail"

Known issues

Graphs - Link groups which have more than 25 links (edges) can no longer be un-grouped due to performance impact on the client.

3.0.4 (12th March 2019)

Features - Visualization

Host to the gateway - displays only the path by default
Path lookup - displays only the path by default
Hub messaging is disabled by default
LDP & MPLS protocols are now part of the L3 group
Window details - external links are removed from tables

Discovery

all changes from the latest release v2.4.0 are included now

Improvements

Site reports
- STP domains graph has only STP protocol now
- Routing domains graph has only L3 protocols
- Overall site graph - access points were removed
Tables - sort by color was removed
Tables - filtering using simple filters isn't triggered automatically when you typing, you have to confirm filtering by hitting Enter
Tables - filtering is disabled if data loading is still in progress
DB indexes optimizations
Added support for 802.1x interface monitor mode detection for Cisco IOS/IOS-XE (auth. open)
Cisco CDP and LLDP neighbors with the same hostname and IP that are connected through the same local interface are considered to be the same regardless of their interface name
Port is now recognized as edge port when network device mac address (without any protocol relations) is associated
Cisco Nexus & 6500 - Virtual mac addresses spanning tree edges fix (CDP between switches is required).
Device type - Device is recognized as a switch if has mac table and VLANs (previously STP mode was enough)
STP domain - Devices without STP edges are not considered as part of STP domain (even when they have some STP mode set).

Bug Fixes

Fixed number of total rows in tables
Fixed Duplicate IP Table - Don't report GLBP virtual addresses
Discovery topology build may fail when WLC device data was refreshed
Wireless clients table didn't display data for the selected snapshot
Cloned snapshot didn't have wireless clients
Changes - Managed IP table was empty
Cisco NX fixed parsing of different output for command "show interface fex-fabric"

3.0.3 (22nd February 2019)

Improvements

Snapshot with 0 devices aren't automatically deleted (revert)
Fixed issue when server has set a proxy then API server can't be reached
DB indexes optimizations
Discovery - Refresh data for specific devices - access points was removed from table
Discovery - Refresh data for specific devices - override device output in snapshot
Discovery - Fixed - Cannot be started when proxy is configured.
Initial network configuration wizard - Fixed - NTP configuration hangs.

3.0.2 (19th February 2019)

Improvements

API service can fails, because Redis service wasn't started
Snaphosts with 0 devices are automatically deleted
Automatically remove latest snapshot, when scheduled discovery start fails on not enough disk space
Fixed services status in status page
Tech Support file - you are able to choose if a snapshot will be included
Maximum BW limit changed to 10Mbps

3.0.1 (12th February 2019)

Improvements

Fixed an error in Site Separation by regex
Tech Support file now contains CLI logs

3.0.0 Release Candidate 1 (6th February 2019)

A complete overview of network history through individual network "Snapshots"
Visualization and analysis for any point in time
Discovery page now enables to add devices to a snapshot, refresh devices in a snapshot, or to create a new snapshot.
Snapshot management tab enables to download/upload, activate/deactivate, clone or delete snapshots.

The Release Candidate is currently in active development.
The RC1 version is designed to collect feedback about functionality for practical situations, such as making changes, tracking history, creating reference snapshots, and more.
Please post any ideas for improvement to https://ideas.ipfabric.io and in case of any problems contact our support team, either via the https://support.ipfabric.io portal or through support@ipfabric.io.