Skip to content

LLRN 4.4.0

These are low-level release notes for IP Fabric release 4.4.0. Please note, that this page contains very low-level information about the actual release, which can lead to false conclusions if you don’t have access to the tickets. On the other hand, it can provide valuable information, if you are looking for a particular detail. This release of IP Fabric contains a total of 166 issues.

Epics

Epics are high-level features, that may consist of many tasks.

  • NIM-7020 – High – Viptela - cEdge fixes

Stories

Stories are high-level features, that may consist of many tasks. These would typically cover extensive functionality in IP Fabric

  • NIM-7061 – Medium – Case insensitive equal filter

Bugs

Anything that we considered an incorrect behavior. Something that was not working as expected or turned out that did not meet customers’ demand.

  • NIM-5094 – Medium – XDP Endpoints show network devices as endpoints
  • NIM-5466 – Highest – Vendor API - correct error msg
  • NIM-6171 – Medium – ArubaCX - add AAA support
  • NIM-6778 – High – technology/routing/path-verifications - Add Path button
  • NIM-6785 – Medium – Juniper Junos - Route Instance Detail private tables filtering
  • NIM-6843 – Highest – Global tables should always be displayed
  • NIM-6845 – Low – Snapshot Management - ADD action vs Vendor API settings
  • NIM-7135 – High – Webhooks - cut off select in modal
  • NIM-7182 – High – Broken buttons in Add Vendor dialog
  • NIM-7193 – Medium – nsx-t api wrong status code 400
  • NIM-7194 – High – Cisco StackWise Virtual
  • NIM-7239 – Medium – vmware NSX-T API no response for get method
  • NIM-7254 – Highest – Migration failed - vPathLookupCheck contains corrupted data
  • NIM-7281 – Medium – Bugfix: commands/mikrotik/_routeros/systemLoggingAction
  • NIM-7313 – Medium – Device Attributes - Column “Value” not filterable
  • NIM-7316 – Medium – Cloned Locked Snapshot shows Locked in Unloaded state
  • NIM-7352 – Medium – Incorrect algorithms in API graph response
  • NIM-7363 – Medium – HP Aruba CX igmp querry interval - fix
  • NIM-7387 – Medium – Frontend is stuck when snapshot load fails
  • NIM-7398 – Medium – PaloAlto in globalVsys aad IPsec task
  • NIM-7406 – Medium – The locked snapshot can be modified
  • NIM-7417 – Medium – [API refactoring] SnapshotloadJob fail
  • NIM-7422 – High – No FW rules for Check Point devices
  • NIM-7426 – Medium – [API refactoring] CleanDBJob fail
  • NIM-7429 – Medium – Bad hostname detection on Brocade switch
  • NIM-7432 – High – Multicast source table - link to pathlookup is broken
  • NIM-7434 – Medium – Bugfix: commands/versa/_vos/vnms/dashboard/appliance/vrrp
  • NIM-7435 – Medium – Bugfix: commands/arista/_eos/vxlan/interfaceVxlan
  • NIM-7439 – Highest – Graph - Can’t open any site
  • NIM-7441 – Medium – Cannot load previous snapshot
  • NIM-7447 – High – Failures When Caching Graph Nodes in Snapshotload Job
  • NIM-7449 – High – NSX-t wrong mapping of edgeCluster members
  • NIM-7453 – High – Hosts table is not showing for a specific ios-xe devices
  • NIM-7461 – Medium – Dev02 Update Unloads All Snapshots
  • NIM-7465 – High – Graph Intent Checks - doens’t work after TSSTRICT refactor
  • NIM-7470 – High – L3 gateway table still not correct
  • NIM-7479 – High – Continuous Azure discovery
  • NIM-7486 – Highest – Cloned snapshot does not retain site separation from original
  • NIM-7492 – Medium – Delete device from snapshot is super slow
  • NIM-7504 – High – Invalid credentials fail on unexpected failure
  • NIM-7505 – Highest – Meraki discovery stuck (APIv1)
  • NIM-7512 – Highest – Starting snapshot doesn’t start and moves user to SSH/Telnet tab without telling why
  • NIM-7513 – High – Site Separation - Migration issue from v4.2 to v4.3.x
  • NIM-7518 – High – “Unexpected null or undefined” when radial view on a topology with 1+ node out of tree
  • NIM-7523 – Highest – Error while transforming an array chunk in a stream: SyntaxError: Unexpected end of JSON input
  • NIM-7531 – Highest – Missing labels in Meraki vendor form
  • NIM-7539 – High – Tasker finish routing protocols dstIntName missing (Pathlookup multicast forwarding)
  • NIM-7550 – High – xDP connections to the same device are pointed to the transit
  • NIM-7556 – Medium – Bugfix: commands/paloalto/showConfigPushedSharedPolicyVsys
  • NIM-7557 – Medium – Bugfix: commands/versa/_vos/vnms/dashboard/appliance/sdWanSites
  • NIM-7559 – Medium – Bugfix: commands/cisco/routingTable
  • NIM-7561 – Highest – xDP connections between HP Aruba AP & HP Arubasw are pointed to the transit
  • NIM-7566 – Highest – Ruckus API with invalid URL says that apiVersion is wrong
  • NIM-7570 – Highest – Ruckus is not in the list of API vendors
  • NIM-7572 – High – [4.4.0+1] unspecified command for API vendors
  • NIM-7579 – High – Broken BFS layouting
  • NIM-7582 – High – Broken BFS layouting - release/4.4.0
  • NIM-7583 – Highest – [4.4.0+1] Delete user button is white with white text
  • NIM-7586 – Highest – [4.4.0+1] Missing delete icon
  • NIM-7588 – Highest – [4.4.0+1] Empty host detail in pathlookup
  • NIM-7594 – Highest – [v4.4.0+1] - Mangement/Changes -> empty table when comparing snapshot
  • NIM-7599 – Highest – 4.4.0+1 Dropdown in connectivity errors detail is not fully shown
  • NIM-7602 – Medium – tasks/license - asa & per-context licenses
  • NIM-7603 – Highest – 4.4.0+1 Transit cloud, edges, and All network in topology graph disappear when intent checks are applied
  • NIM-7606 – High – Wrong pop-up message on technology/security/access-list
  • NIM-7612 – High – [4.4.0+1] Invalid bind credentials in LDAP doesn’t seem to return any response
  • NIM-7614 – Medium – Bugfix: commands/hp/_comware/interface
  • NIM-7615 – Highest – [4.4.0+1] New tables are not available in table tree menu
  • NIM-7616 – Highest – The wrong color for Leave button
  • NIM-7617 – Highest – [4.4.0+1] Table componet - Display settings - Label for Toggles are not clickable
  • NIM-7618 – Highest – [4.4.0+1] Device Explorer - Missing ACL table for firewall devices
  • NIM-7626 – Highest – [4.4.0+1] Read User - has available Device Attrbute table
  • NIM-7627 – Medium – [4.4.0+1] Read User is able to modify records in device attributes
  • NIM-7635 – Highest – Juniper MIST - hostname fix - Release/4.4.0
  • NIM-7641 – Highest – Updater unique constrained violated on MIST
  • NIM-7642 – Highest – Ruckus - same AP client saved twice (unique constraint index fail)
  • NIM-7645 – Highest – Ruckus vIntL2 exists more than once [4.4.0+2]
  • NIM-7648 – Highest – 4.4.0+1 SSO doesn’t seem to work
  • NIM-7651 – High – Juniper - remove ACCESS-INTERNAL routes
  • NIM-7656 – Highest – commands/ruckus/_vsz/apOperationalSummary (or tasks/devInfo/ruckus) - negative uptime
  • NIM-7713 – Highest – Discovery cache isn’t cleared
  • NIM-7722 – Highest – 4.4.0+3 Maintenance is running while graph is being cached

Tasks

Task may be associated into Epics or Stories to form complex features.

  • NIM-2989 – High – Improve Support MATRIX portal
  • NIM-4597 – Medium – Extreme feature request for Extreme
  • NIM-4713 – High – Cisco - Licensing
  • NIM-5459 – Low – Support for LDAP StartTLS
  • NIM-5543 – High – Add new table - Technology / Security / ACL / Global ACL policies
  • NIM-5894 – Medium – List portchannel interfaces without any members in the portchannels member status table
  • NIM-6520 – High – HP Aruba CX vxlan
  • NIM-6573 – Medium – HP Aruba CX SNMP
  • NIM-6585 – High – Juniper MIST - Discovery
  • NIM-6806 – High – Ruckus Virtual Smartzone - Discovery
  • NIM-6834 – Medium – AWS - virtualMachines
  • NIM-6870 – High – Design dropdown menu positioning
  • NIM-6930 – Medium – Pathlookup packet tracking - Remember selected edge
  • NIM-6962 – Highest – Virtual Machines table (AWS, Azure, NSX-T)
  • NIM-6990 – Medium – Discovery of Palo Alto - device “discovered” but not added into inventory (target-vsys / multi-vsys) - Platform 7000
  • NIM-7064 – High – Ruckus Virtual SmartZone - API Client
  • NIM-7068 – Highest – Prepare arangodb example to show collection/doc locking issues
  • NIM-7074 – Medium – Remove parsing of multicast table (inet.1) from commands/juniper/_junos/route
  • NIM-7079 – High – Counters - Input errors details
  • NIM-7100 – Medium – Cisco _asa folder
  • NIM-7101 – Medium – Cisco _ftd folder
  • NIM-7102 – Medium – Cisco _nxos folder
  • NIM-7103 – Medium – Cisco _sg folder
  • NIM-7107 – Medium – AWS - interfaces name / description
  • NIM-7130 – Highest – API Vendors licensing - Cloud, SDWAN, Cloud Wireless
  • NIM-7137 – Medium – Cisco _viptela folder
  • NIM-7138 – Medium – Cisco _wlcair folder
  • NIM-7139 – Medium – Cisco _wlcIosxe folder
  • NIM-7162 – Medium – Create manuals for adding a new vendor (API/CLI)
  • NIM-7198 – Medium – Remove sampled property from security schema actionBase
  • NIM-7217 – High – [API refactor] allow dependency injection
  • NIM-7219 – High – [API refactor] update logging code
  • NIM-7221 – Medium – [API refactor] update ArangoDB code
  • NIM-7230 – High – Interface error counters - new table columns
  • NIM-7232 – High – Security - Discontinuous subnet masks (IPv4)
  • NIM-7240 – Medium – Remove MongoDB from the product
  • NIM-7247 – High – Create juniper mist API client
  • NIM-7252 – High – UI support for LDAP StartTLS
  • NIM-7301 – High – Cisco Catalyst 9300/9200 switches - power supply and fans
  • NIM-7318 – High – Full version of Font Awesome
  • NIM-7334 – High – [4.4.0+1] Add Cisco APIC vendor API support to UI
  • NIM-7343 – High – virtualMachines - network interface id
  • NIM-7345 – High – Security model - implement new fields added to interface selector
  • NIM-7353 – High – Ruckus VSZ vendor API client support for POST requests & pagination
  • NIM-7355 – High – Add Ruckus Virtual SmartZone vendor API support to UI
  • NIM-7381 – High – License task - new tables
  • NIM-7390 – Medium – Improve logs when deleting a snapshot
  • NIM-7391 – Medium – Refactor AQL - use eIntL2IntL3
  • NIM-7401 – Medium – [API] Fix management changes endpoint to use snapshot shortcuts
  • NIM-7403 – Medium – Implement support for discontinuous masks in API
  • NIM-7404 – Medium – [API refactor] disable TS implicit any in API repo
  • NIM-7409 – High – Add Juniper Mist vendor API support to UI
  • NIM-7421 – High – Improve task documentation
  • NIM-7446 – Medium – commands/cisco/showInventory & devInfo results vs. End of Life information
  • NIM-7456 – Medium – Inventory / Sites / Manual Separation - add autocomplete for site name
  • NIM-7460 – Medium – Merge multiple API config files
  • NIM-7462 – High – UI Change - Management IP to Login IP
  • NIM-7515 – Highest – Generate fresh list of tables
  • NIM-7534 – High – tasks/sn - use slash to separate sn from the logical device name
  • NIM-7536 – Medium – Stop using winston directly
  • NIM-7548 – Medium – Vendor API clients stability tweaks
  • NIM-7563 – Highest – Rename junipermist to juniper-mist
  • NIM-7673 – Medium – Ruckus device discovery - filter out pre-prevision devices that are not connected
  • NIM-7674 – Highest – Ensure devType is always set for wireless AP
  • DOS-152 – Medium – Provide basic syslog configuration for a new target
  • DOS-302 – Medium – Fix AWS permissions for new LABs
  • DOS-319 – Highest – Update of API breaks manual SSO configuration

Sub-Tasks

Sub-tasks are very well contained work packages, organized under Tasks.

  • NIM-6391 – Medium – Extreme XOS/EXOS AAA support
  • NIM-6654 – Medium – Prototype IP/CIDR component endpoints
  • NIM-6779 – High – Cisco APIC API client
  • NIM-7086 – Medium – Site Separation - change drang & drop effect in the table
  • NIM-7199 – High – Show (global) tables in the frontend when no snapshot is loaded
  • NIM-7206 – Medium – Add endpoint for new table of ACLs applied globally
  • NIM-7210 – High – Security model - add mac and vxlan selectors
  • NIM-7292 – High – Improve Vendor API error messages in UI
  • NIM-7305 – High – Security model: new header selectors – eth, vxlan
  • NIM-7330 – Medium – Security model: intra/interGrp selectors implementation
  • NIM-7400 – Medium – tasks/acl - Cisco discontinuous masks support
  • NIM-7405 – High – Add insensitive equal filter support into frontend
  • NIM-7489 – Highest – Virtual Machines Tables - webng part
  • NIM-7501 – Highest – Interface counters tables - webng part
  • NIM-7514 – Highest – New tables for Licenses - webng part