Skip to content

IP Fabric v4.x.x

Clearing Browser Cache

Please force refresh your browser cache after an upgrade. Depending on your operating system all you need to do is the following key combination:

  • Windows: CTRL + F5
  • Mac/Apple: Apple + R or command + R
  • Linux: CTRL + F5

4.4.2+1 (3rd May 2022)

Bug Fixes

  • Juniper Mist -- API connection now uses a system proxy.
  • Cisco -- VSS table -- fixed missing switches with legacy VSS
  • Cisco -- fix inventory parsing of PID values (power supply, transceivers, device id,...)
  • Fortinet FortiGate -- fixed discovery of device with pre/post login banner enabled

4.4.1+1 (13th April 2022)

OVA MD5SUM: 0CFD220F2D4BE5AB71D8D33E382C624E
OVA SHA256SUM: 68055EE2884256F2C7BC7AAE0C2C525C7E4779651FB404BC38EAFF76775A66D2

Note

If you have already successfully upgraded to 4.4.0, you do not need to apply this release.

Bug Fixes

  • We had a bug in data migration that caused a unique constraint violated error.

4.4.0+6 (11th April 2022)

Breaking change -- How is sn created for virtual contexts

We needed to unify the way how is the device sn (Serial Number) constructed for devices with virtual context. Following vendors are affected with the change:

  • Cisco ASA with virtual contexts
  • Cisco WLC with system access point
  • Cisco NX-OS with VDC
  • Fortigate with VDOM

In 4.4.0 we are migrating device attributes that are necessary for manual site separation but we are not able to migrate snapshots from the older versions. Therefore sites in the older snapshots can be wrong if manual site separation was used. Also, if you compare a snapshot in a version higher or equal to 4.4.0 with a snapshot in a lower version than 4.4.0 that includes affected devices then you might encounter false-positive changes in the snapshot comparison.

Changes in licensing model

Please note the changes in licensing model. Devices discovered via APIs are going to consume license similarly to the physical devices (except Access Points). You can find more information at the dedicated licensing page.

Changes in Configuration Table since v4.4.0

The following column names were changed ["_id", "lastChange", "lastCheck"] to ["id", "lastChangeAt", "lastCheckAt"]. Providing a snapshot ID in the POST was also removed from the /tables/management/configuration endpoint.

New Vendor Support

  • Added support for Cisco Viptela cEdge
  • Added support for Juniper Mist
  • Added support for Ruckus Virtual Smartzone

Features -- Protocol and technology support

  • HP ArubaCX -- added support for AAA.
  • HP ArubaCX -- added parsing for SNMP configuration.
  • HP ArubaCX -- Added parsing VXLAN info.
  • Extreme XOS -- Add support for AAA.
  • Cisco Viptela -- added cEdge support. If cEdge is discovered via cli, discovery ends and notify, that API discovery should be used.
  • Cisco -- Added information about device licenses. Tables located at Technology / Management / License.
  • Added data for Virtual Machines deployed in the network (AWS, Azure, VMware). Tables are located at Technology / Cloud.
  • Add additional interface counters to most of the vendors. Table are located at Technology / Interfaces / Counters.
  • Add new table ACL global policies located at Technology / Security / ACL / Global ACL policies.

Bug Fixes

  • The discovery process for vendors processed via API can get stuck -- fixed.
  • VLAN L3 gateway table -- Access points are removed as they produce false-positive gateways.
  • Routing protocols destination interface fix -- path lookup multicast routing was broken because of this.
  • The data from global tables are available also when running snapshot is selected.
  • Snapshot attributes are now copied when a snapshot is cloned.
  • Loading a snapshot could sometimes cause an Unexpected end of JSON input error and then the snapshot will get corrupted. The root cause has been fixed.
  • Arista EOS -- Fixed false positive error emitting from show interfaces vxlan 1.
  • Azure -- fixed mapping of network interfaces without MAC address.
  • Brocade Fastiron -- Improved parsing hostname from prompt.
  • Cisco -- fixed host table for devices reachable with LISP.
  • Cisco -- fixed parsing of PIDs containing plus symbol in command show inventory.
  • Cisco FTD -- commands/cisco/routingTable -- fixed parsing for null summarized routes.
  • Cisco IOS -- removed text , wildcard bits from texts in standard ACL.
  • Cisco IOS-XE -- fixed parsing of rebuild version.
  • Cisco IOS-XE -- fixed parsing of power supply and fans on Catalyst 9200/9300/9500.
  • Cisco IOS/IOS-XE -- Fix transport protocol (telnet) detection.
  • Cisco NX-OS -- fixed matching of MAC Addresses interface reference (fabric path) to real interface.
  • Cisco NX-OS -- add parsing of port-channel interfaces without members.
  • Cisco Meraki, Juniper Mist, Ruckus -- fixed device’s type detection to ensure wireless APs are detected properly.
  • Extreme XOS -- fixed parsing of l2Interfaces of missing interfaces.
  • Fortinet FortiGate -- fixed executing of cmd get system password-policy on VDOM enabled firewalls.
  • Fortinet FortiGate -- Fixed missing FQDN in firewall policies unless configured in lower case.
  • Fortinet Fortigate -- fixed parsing of get router info ospf nei detail for NSSA cases.
  • HP Aruba switch -- added parsing of port information.
  • HP ArubaCX -- fixed parsing of IGMP query interval.
  • HP Comware -- fixed parsing of display lldp neighbor-information verbose
  • HP Comware -- fixed parsing of display stp region-configuration in case vlans list is on multiple lines.
  • Juniper Junos -- access-internal routes were removed from routing table.
  • Palo Alto -- fixed parsing of empty applications/services in security rules.
  • Palo Alto -- fixed parsing of show high-availability state for suspended state.
  • Versa VOS -- commands/versa/_vos/vnms/dashboard/appliance/sdWanSites -- fixed mapping for unsupported IPv6 links.
  • Versa VOS -- VRRP -- Allow virtual IP for instances in Init status.
  • VMware -- NSX-T -- fixed discovery for T0/T1 routers.

4.3.5+1 (9th March 2022)

Bug Fixes

  • Routing protocol edges wrong establish to transit fix

Known issues

  • Discovery with added Vendor API can get stuck and doesn’t finish in some cases. Replicated on NSX-T v2.5, Azure, Meraki

    • ID: NIM-7505, NIM-7479, NIM-7437
    • Root cause: Unlocked resources after calling unsupported API endpoint
    • Status: Fixed in 4.4.0 release
    • Workaround: Stop discovery and disable Vendor API
  • When discovery is stopped after collection from devices is done, API will allow other jobs to run - making them run in parallel. It is especially an issue when running maintenance is started immediately because it re-indexes the DB - making caching take really long time.

    • ID: NIM-7722
    • Root cause: Discovery allows to run parallel jobs.
    • Status: Fixed in 4.4.0 release
    • Workaround: Do not stop discovery job or do not run maintenance (manually or as a scheduled job).

4.3.4+3 (7rd March 2022)

OVA MD5SUM: A5DB9B8C51169216167866C9AD6E951C
OVA SHA256SUM: 2D64A41DF78D3965F70AD80807D788FD12E0F7A1DDCF39A6B23911BF72A8311D

Bug Fixes

  • Internet proxy was not working - fixed now
  • Snapshot load with F5 device could fail on JSON error. This was hard to replicate, happened only occasionally. Fix should work.
  • Fortinet FortiGate - fix get system status command parsing to handle operating system versions without any maintenance ID
  • L2 edges from switch to firewall - Multiple wrong edges were created because of same virtual mac address on Juniper SRX firewalls (could be also case for other vendors). This could cause too problems with graph cache calculations. Fixed and firewalls with same virtual mac are in different sites, L2 edges will be established properly.
  • L2 edges for back-to-back connections - fix for non matching switchport modes.
  • HP Comware -- fix parsing of Route-Aggregation interfaces.
  • HP 3Com - fixed parsing of display device manuinfo command
  • Duplicate IP on same device on different subinterfaces and different sites -- establishing forwarding and routing protocols sessions is fixed.
  • Some topology calculation speed ups for networks with many routing protocols sessions
  • Pathlookup - Routing with OIDs, skip checking underlying L2 path
  • Fix parsing Virtual Servers and Pool members with routing domains and any ports.
  • VMWare NSX-T -- fixed mapping of empty mac-table
  • Error when opening Intent Rule verification in End Of Life Milestones page fix
  • Arista -- fixed parsing of platform
  • Fixed possible crash in syslog worker when collecting device configurations
  • Fixed POST /snapshots endpoint, it failed when snapshotName or snapshotNote was used
  • The site names could be wrong when the manual site separation rule was disabled - fixed
  • Fix load of graph views

4.3.3+2 (23rd February 2022)

Bug Fixes

  • Snapshot load time - data preparation before the process started was slow, fixed and speed is same as before
  • Snapshot settings could overwrite global settings
  • Migration of very old snapshot fix

4.3.2+2 (22nd February 2022)

Bug Fixes

  • Palo Alto - Fixed discovery of multi vsys firewalls.
  • Mikrotik RouterOS - Fixed parsing of MTU in case it has value "auto" in output of command `/interface print detail
  • Fortinet FortiGate - Fixed wrongly assigned MAC address to link aggregation interfaces on HA primary units
  • Jumphost - Jumphost was broken in 4.3.0 release, fixed.
  • Graphs - Fail on hidden transit or clouds fixed.
  • /platforms/vdc/devices table fail when snHw column was included

Improvements

  • Check Point Gaia - improved pairing of gateways with management server data to fix missing zone firewall policies

4.3.1+1 (17th February 2022)

OVA MD5SUM: 0ab89eb2127d5a83f806876b438dcd95
OVA SHA256SUM: 3d07c8f1a51497eae671a43130cbf536b7e7bdf9ae6ba9030ebc50c981328119

Bug Fixes

  • Missing hostname on Cisco devices with non standard transceivers

Features - Protocol and technology support

  • HP ArubaCX - Added syslog support

4.3.0+4 (16th February 2022)

New Vendor Support

New Features

  • Added Single sign-on (SSO), read how to set it up Enabling SSO Providers
  • Device Attributes - the table is located in Settings / Device Attributes, where you can set attribute per device (SN) and the value for a specific attribute. Device Attributes. We support following attributes

  • siteName - set a site name (location) for a specific device and in case you have enabled the Manual site separation rule in Site Separation settings then the name will be used in future snapshots for that device.

  • stpDomain - set a name of the STP domain for a specific device and this domain name will be used in future snapshots for that device. But also other members that belong to the same STP domain and don't have an attribute set will be moved there automatically.

  • routingDomain - same as STP domain, but for Routing domain

  • Added support for AWS Assume Role that can be configured in Vendor API settings

  • Graphs - Path Lookup - Added simulation for Cloud / SD-WAN networks. Simulate packets between legacy and next-gen networks!

  • Graphs - Path Lookup - Added detection of packets in the loop - the option is on Visualization Setup.

  • Graphs - Path Lookup - The packet can be traced hop by hop in "Show Detail" by Next/Prev buttons

  • Graphs - Path Lookup - added more options into path lookup form like L7 applications, ICMP options, IP Regions, TTL, and everything can be saved to setting preset

  • Graphs - Path Lookup - added "First hop algorithm" option, this will allow you to simulate external networks by specifying where the packet should start (device/interface)

  • unfortunately, all the above Path lookup changes cause a breaking change in the API request payload.

  • See Tech Notes for Path Lookup

Features - Protocol and technology support

  • HP ArubaCX - Implement IGMP/PIM
  • F5 BigIP - Added support for virtual servers and pools. New tables added:

  • Technology / Load-balancing / Virtual Servers

  • Technology / Load-balancing / Virtual Servers Pools
  • Technology / Load-balancing / Virtual Servers - Pool members
  • Technology / Load-balancing / F5 Partitions

  • Added new table Technology/ Port channels / MLAG / Cisco VPC

  • Extreme Xos - Added POE support

Improvements

  • Site Separation has been rewritten, it respects Device Attributes (see New Features)
  • there was added an algorithm to determine the site name based on SNMP location.
  • also added an option that will try to assign devices without site name to the site based on device neighborship.
  • Discovery classification improved - only IP addresses with interfaces in UP state go to the discovery process.
  • Router to switch connection with some members of port-channel in state down could prevent STP edge establishment.
  • Updated EoL information for F5
  • Router with no VLAN tag on the interface to ACI leaf connection over L2 with xDP added.
  • Table Technology / Security / IPSec / IPSec tunnels - add new column "Tunnel interface description"
  • Table Technology / Addressing / Manage IP - add new columns "Interfaces L1 state", "Interfaces L2 state"
  • Table Technology / Security / DMVPN - add interface column
  • Zone Firewall and Access lists security tables are now broken to rule level with columns that are string searchable for all values (some of the columns are hidden by default). Tables also allow the application of intent checks.
  • Table Technology / Security / Access lists
  • Table Technology / Security / Zone firewall
  • The date and time values are now displayed in ISO8601 format
  • Cisco Firepower - Change collecting data to use FMC API and add support for application rules: More Dropping support for ACL on Cisco Firepower
  • Added API endpoint POST /v1/tables/management/snapshots for the possibility to get information about all snapshots (loaded, unloaded) via API
  • Path Lookup inspector - cosmetic improvement of ACI endpoint lookup reporting
  • Path Lookup - Forwarding for explicit label 0 fix
  • Check Point Gaia - added collecting of static ARP
  • Cisco - IOS, IOS-XE, IOS-XR, NX-OS and Juniper Junos - change BGP route max threshold evaluation to be done on a per VRF basis.
  • Extreme XOS - Added new reason of disabled port port not present
  • Fortinet FortiGate - configured virtual IPs and IP pools were missing in the list of managed IP addresses

Bug Fixes

  • If Snapshot Settings had stored credentials without username then credentials from the Global setting were taken
  • Graph - The detail for XDP link between two devices could include records that pointed from one device to the Transit cloud.
  • Table Management / Changes - fixed export of CSV that didn't work
  • Table Technology / MPLS / Forwarding - nexthop label 0 value was not previously shown. Fixed now
  • Arista EOS - Fix parsing of the routing table.
  • Arista EOS - fix subinterfaces parsing from command show ip ospf neighbor detail
  • Arista Eos- Fix parsing of command show lldp neighbors detail.
  • AWS - Fix mapping of aws/_ec2/describeRouteTables
  • AWS - Fix parsing for a command that shows tunnelOptions which can be empty.
  • Checkpoint Gaia - Fix parsing for Alias interfaces.
  • Checkpoint Gaia - Fix parsing for command show cluster members interfaces all.
  • Checkpoint Gaia - Fix parsing for empty management interface entry.
  • CheckPoint Gaia - collect only relevant SNMP configuration according to agent version
  • Checkpoint Gaia - Fix parsing for command show ospf interfaces detailed
  • CheckPoint Gaia - fixed error when only a virtual IP was assigned on an interface
  • CheckPoint Gaia - fixed missing zone firewall policies on gateways with VPN tunnel interfaces
  • CheckPoint Gaia - fixed parsing of physical interfaces from command show cluster members interfaces all
  • Cisco - fixed PID parsing for nonstandard Cisco transceivers from command show inventory
  • Cisco - Fix duplicate entries for lldp and cdp discovery.
  • Cisco - Fix parsing of nexthop list from routing table
  • Cisco - IOS/IOS-XE fixed parsing of show ip mroute count command
  • Cisco ASA - the discovery of firewall contexts fixed
  • Cisco ASA - fixed MTUs and IP addresses parsing on tunnels.
  • Cisco ASA - fixed parsing of named ip addresses from show running-config
  • Cisco IOS - add support for portgroups in ACL
  • Cisco IOS - fix N/A value in current traffic from command show storm-control
  • Cisco IOS - Fix parsing of speed, duplex and tunnel type.
  • Cisco IOS - fix state when two (current and trap) are outputed in command show storm-control
  • Cisco IOS - fixed parsing of tunnels in case source/destination IP address is missing
  • Cisco IOS - Remove emitting error for bgp neighbors in state 'idle'
  • Cisco IOS-XE - Add missing vlanId for the command show interfaces.
  • Cisco IOS-XE - added support for another output format of the show env/environment status command
  • Cisco IOS-XE - Fix parsing for no transceivers in command show interfaces transceiver
  • Cisco IOS-XE - Fix parsing of interface counters for command show wireless client mac-address <int> detail
  • Cisco IOS-XE - Fixed parsing for virtual IPv6 addresses in command show standby
  • Cisco IOS-XE - Removed PTP related errors throwing in case show ptp clock dataset default does not provide any results
  • Cisco IOS-XR - commands/cisco/isis/neighborsDetail - fixed parsing with different neighbors format.
  • Cisco IOS-XR - commands/cisco/routingProtocols/ipRouteSummaryVrf - fixed parsing with different format.
  • Cisco IOS-XR - Exclude parsing of monitor sessions in L2VPNs.
  • Cisco IOS-XR - Fix parsing for the command show bgp all neighbors
  • Cisco IOS, IOS-XE - Fix parsing for command show subscriber session all.
  • Cisco IOS, IOS-XE, IOS-XR some routes with MPLS label were not used correctly even when next hop is known.
  • Cisco NX-OS - show vlan brief parsing updated to handle error message displayed due to Cisco bug CSCvr88898
  • Cisco NX-OS - Fix parsing of command show password strength-check
  • Cisco NX-OS - Fix parsing of ospf state for the command show ip ospf interface vrf all.
  • Cisco NX-OS - Fixed parsing for negative DHCP snooping values in command show ip dhcp snooping statistics, probably bug on device.
  • Cisco NX-OS - fixed parsing of command show mac address-table that were containing fabric path SWID.
  • Cisco NX-OS - fixed parsing of different output for command show snmp user

  • Cisco viptela - Fix parsing of uptime from command /device/bfd/sessions?deviceId=

  • F5 Big-IP - added support for IPv6 NTP source addresses in command run util bash -c "ntpq -np"
  • F5 Big-IP - commands/f5/_big-ip/showSysHardware - fix parsing various sections of command
  • F5 Big-IP - Fix parsing of translated ports in command list /sys sflow receiver all-properties
  • F5 BIG-IP 2000 - Fix parsing if the output of the command list /sys management-ip is empty.
  • F5 Big-IP - Fix parsing of invalid interfaces for command show cm device.
  • F5 Big-IP fix prompt detection - add the possibility for "(Sync Only)"
  • Fortinet FortiGate - Added another parsing option of src-filter for command show firewall VIP.
  • Fortinet FortiGate - Fix parsing for command show system ha
  • Fortinet Fortigate - Fix parsing for the command get router info bgp nei
  • Fortinet FortiGate - MAC address on link aggregation interfaces could be missing in some cases
  • HP 3Com - Fix device detection from display version command
  • HP 3Com - remove ip address reference from directly connected routes.
  • HP Comware - Added support for tunnel protocol: UDP_ADVPN/IP.
  • HP Comware - Fix parsing for command display arp
  • HP Comware - Fix parsing for command display fan
  • HP Comware - Fix parsing of BGP peer instance regex for localID.
  • HP Comware - Fix regex splitting of state and age for command display ip routing-table verbose.
  • HP Comware - Fixed parsing of M-Ethernet and TwentyGigE interfaces
  • HP Comware - fixed parsing of power supplies from command display power
  • HP Comware - Fixed parsing of Route-Aggregation interface in the command display interfaces.
  • HP Comware: fix routing relation on own address.
  • Juniper - fixed parsing firewall rules - added nonterminating actions.
  • Juniper Junos - Add an exception for infinite values while parsing the command show interfaces diagnostics optics
  • Juniper junos - commands/juniper/junos/configurationDisplaySet - added from dscp, ttl, is-fragment (with except actions if applicable) action to firewall parsing.
  • Juniper junos - commands/juniper/_junos/interfacesStatisticsDetail - fix parsing errors on interfaces - added support for a type of output.
  • Juniper Junos - commands/juniper/_junos/route - Removed Service to routes, unable to resolve next hop for those routes
  • Juniper Junos - Fix parsing of no output from command show sflow
  • Juniper Junos - fixed parsing for fans which don't have tray information from command show chassis environment
  • Juniper Junos - fixed parsing of "null" encryption in command show security ipsec security-associations detail
  • Juniper Junos - improved information parsing of deactivated and protected configuration
  • Juniper Junos - removed management interfaces with configured ip 128.0.0.1/2 or 10.0.0.1/8
  • Juniper Junos- fixed parsing of command show interfaces statistics detail for logical-unit-number larger than 4095
  • Paloalto pan-os - commands/paloalto/showConfigPushedSharedPolicyVsys - fixed parsing of none zone in security rule.
  • Paloalto pan-os - fix services parsing from command show config merged

4.2.0 (20th December 2021)

OVA MD5SUM: E50411AF79A1990249FA9D041809302E
OVA SHA256SUM: 8D773667434B4C27C9C199E84784312864E01C08D51DAA158B7C07C9B99BFD8F

New Vendor Support

  • Added support for HP 3Com

New Features

  • Graphs - New layout option - Radial Tree: Use this layout for tree topologies to expand outward from center.
  • New table - Technology / Management / AAA / Password Strength
  • Added timezone support - every user can set his preferred time zone and each cron job has also its own timezone settings. The logs are always in UTC.

Improvements

  • Arista EOS - added support for another output format of show vrf command
  • Cisco ASA/FTD - added support for local syslog targets and fixed parsing of show logging in case there are ifNames containing special characters
  • Cisco ASA/FTD - syslog - show logging command replaced with a more efficient show logging setting
  • Fortinet FortiGate - fixed missing policies with configured profile group
  • HP ArubaCX - Add parsing of reload reason
  • HP ArubaCX - added support for parsing of interface load.
  • Juniper Junos - added missing community string in table technology/management/snmp/trap-hosts.
  • Juniper Junos - commands/juniper/\_junos/configurationDisplaySet - add parsing for firewall tcp-established from action

Bugfixes

  • The users with Read privileges weren't able to open Device Explorer
  • The path lookup form wasn't correctly filled with data from the loaded view
  • Arista 7010t - fixed parsing of different output for command show inventory
  • Arista eos - commands/arista/_eos/ntp - fixed parsing with different refid
  • Arista eos - fixed parsing of default-control-plane-acl by command show ip access-lists in case it contains cvx-license port
  • Cisco ACI - fixed parsing of backbone area in show ip ospf interface vrf all
  • Cisco ASA - added support for another output format of show bgp neighbors
  • Cisco csr1000 - MPLS - added support for an additional type of show mpls forwarding-table detail command output
  • Cisco IOS - Fix parsing of interface tunnel protocol.
  • Cisco IOS-XR, NX-OS - MPLS forwarding - shortened commands sh mpl for and sh mpl switch extended to their full syntax to prevent ambiguous command error
  • Cisco IOS/IOS-XE - tasks/vrf - use show ip vrf detail if show vrf detail is not available.
  • Cisco MS - Fixed parsing of Meraki device clients.
  • F5 BIG-IP i800 - Fix parsing of NTP data.
  • Fortinet FortiGate - Fix for bad parsing of command diag hard dev nic.
  • Fortinet FortiGate - Fix parsing for command show full application list.
  • Fortinet FortiGate - fixed missing zoneFw data for geography address objects and application profile data
  • Fortinet Fortigate - fixed transceiver value parsing.
  • HP Comware - fixed parsing of display lldp neighbor-information verbose command in case there are no neighbors
  • HP Comware - Fixed parsing of TwentyGigE interfaces.
  • HP Comware 5130 - AAA - fixed parsing of server parameters
  • Huawei VRP - fixed parsing of different output for command display info-center
  • Juniper Junos - Fix parsing firewall filter section - problem with unsupported from action
  • Palo Alto - fix parsing of interface secondary IPs.

4.1.1 (3rd December 2021)

OVA MD5SUM: 9487074E08641A8FD1C7F0E887B92EA4
OVA SHA256SUM: 901018EE369B630CD80C6438B3A4D0C54F0F3D7BCD9156B9F93087C9B5147ECE

New Features

  • Graphs - allow for selection for nearest neighbors (1st, 2nd, 3rd level of neighbors)

Breaking changes

  • Changed format of payload for API Endpoints /tables/management/changes/*

Improvements

  • Site Separation - HOTFIX - added button to disable paging, this will allow drop rules among pages.
  • Management / Configuration - can be used only for users with "Discovery" & "Read" privileges.
  • End of Life milestones tables - add URL into CSV export
  • Configuration Management - respect if Telnet is disabled/enabled now
  • Graphs - the nodes can be also searched by SN now
  • Pathlookup - support for Cisco VXLAN anycast gateway added
  • Graphs - Intent Checks overlay - the data in "Show detail" have colored only one column based on the applied report
  • Services - webhook service is correctly started and enabled
  • FTP backup - dropped SSL certification validation for FTP backup, please use SFTP for more secure file transfer

Bug fixes

  • Tables - Management / Changes - fixed filtering in all changes tables.
  • Fixed name of tech support file
  • Graph requests might fail when an incomplete payload was sent.
  • FIX Rediscover action in Connectivity Report
  • Fixed filename of downloaded Techsupport file
  • Routing to Cisco ACI pervasive address fix
  • Fortinet FortiGate - prevented to execute command get system interface transceiver if transceivers task is disabled
  • Cisco - SUP32 based Catalyst platforms - fixed to use show ip igmp interface" comman to gather IGMP snooping interface related information
  • Cisco ASA/FTD - added show failover command to detect Active/Standby status of unit/context in HA cluster
  • Cisco ASR routers - added support for PTP related commands show ptp clock dataset default, show ptp clock dataset parent domain <domainId> and show ptp
  • CheckPoint Gaia - fix of missing zoneFw rules for some of the managed firewalls
  • Juniper Junos - fixed parsing for security with no address books.
  • Cisco - NX-OS - fixed parsing of interface speed on for some nexus switches
  • Cisco NX-OS - commands/cisco/stpMstMapList fixed parsing when mapped vlans are on multiple lines
  • Juniper - fixed parsing of ethernet switching table on QFX switches
  • Fortinet FortiGate - fixed discovery of VDOMs with long name
  • Huawei VRP - Fix OS detection for NetEngine 8000

4.1.0 (15th November 2021)

OVA MD5SUM: 70CF5FCD46262EF621BFC2DCA8895B17
OVA SHA256SUM: DD5F1F0F701974CC8367336DDB7B3877CAAF3BD6DC114BB37C178CD104CA8BA7

Important

If you’re migrating from 4.0.2 to 4.1.0 then you have to reload all your snapshots manually

New Vendor Support

  • Added support for Cisco Viptela

Improvements

  • Add hostname to Detail tab in the Device Explorer component
  • Changes in POST /snapshots endpoint - the snapshot snapshotName and snapshotNote can be set now
  • End of life database has been updated for Juniper, HP, Cisco, and Fortinet. Also, EOL dates for Cisco Meraki were fixed.
  • Fortinet FortiGate - show Possible device error message in the Discovery issues tab in case that all VDOMs can’t be discovered on FortiGate because of wrong permissions
  • Graphs - the Transit cloud has a different icon now
  • Inventory / Interface - add new column "Original Name" - Non-standardized interface name (hidden by default)
  • Inventory / Interface - column IP now shows the physical address of the interface (instead of virtual IP)
  • Paloalto pan-os - tasks/_helpers/security/preProcess - added support for application-filter
  • Significant optimization of DB queries for snapshots where exists hundreds of interfaces for a single device.
  • Snapshot download - the file name now consists from following <snapshotName>-<snapshotTime>-<snapshotKey>.tar
  • Snapshot download - the UI has been improved, added snapshot name and snapshot timestamp
  • Snapshot name in the UI - the order of labels was changed, the timestamp is first and the custom name is below that.
  • SSH connection to PaloAlto - confirmation for Do you accept and acknowledge the statement above? fixed. It will allow the discovery of PaloAlto with this confirmation. SSH library was upgraded to new version.

Bug Fixes

  • API /graphs/png endpoint - the PNG export didn't work - fixed.
  • Arista EOS - added support for rules with DSCP in command show ip access-lists
  • Arista EOS - fixed parsing of show ip virtual-router for another output format
  • Arista EOS - fixed parsing of interface ranges in command show ip access-lists summary
  • Arista EOS - fixed parsing of logging and snmp information in command show running-config
  • CheckPoint Gaia - fixed missing zone firewall data for VSX clusters
  • CheckPoint Gaia - fixed version detection for OS versions
  • CheckPoint Gaia - policy rule was missing if Install On was set to a group object
  • CheckPoint SMS - fixed processing of nested inline rulebase layers
  • Cisco - ASA - added support for FWSM detection (support for show version command parsing)
  • Cisco - fixed ACLs parsing in case they contain multiple white characters between keywords
  • Cisco - QoS fixed parsing for nested child service policies
  • Cisco IOS - commands/cisco/vxlan/nvePeers - added support for an additional type of show nve peers command output
  • Cisco IOS-XE - Added exclusion for ACL rule system-cpp-energywise-disc containing bug (CSCue04444) in show ip access-list
  • Cisco IOS-XE - fixed parsing of assigned ACLs from show ip interface command in case of different output format
  • Cisco IOS-XE - fixed parsing of recursive routes with MPLS label.
  • Cisco IOS/IOS-XE - routing table - added support for ICMP redirects and filtering out of possibly down routes
  • Cisco NX-OS - an icon of Nexus 9000 changed to match the icon of Nexus 7000.
  • Fixed advanced filtering in Snapshot Management / Inventory table (OR condition didn't work)
  • Fixed Interface edge classification for tunnel interfaces.
  • Fixed PNG export for graphs via API request
  • Fortinet FortiGate - fixed empty MAC table
  • HP ArubaCX - added support for another output format of command show interface
  • HP ArubaCX - added support for another output format of command show ip ospf neighbor detail
  • HP ArubaCX - Added support for task vrf
  • HP ArubaCX - Fix parsing for command show ip route all-vrfs
  • HP ArubaCX - fixed parsing of platform in command show system
  • Path lookup - ACI and firewall routing to duplicate IP addresses fix.
  • Router to switch L2 edges - same mac on multiple interfaces fix
  • Table Management / Changes - the column #IP Addresses had always 0 as a value - fixed
  • Versa - standardize duplex values

4.0.2 (11th October 2021)

OVA MD5SUM: 7b23502208cbffe07584e31ccd48f29e
OVA SHA256SUM: 045123c5ccfeeb0f89eb1af8fb6a1dd3de1d91a109f0024a281da2d788db6c40

Features - Protocol and technology support

  • Arista - added ACL support
  • CheckPoint Gaia - added VRRP support
  • Cisco - AAA - new local users table added, located at Technology / Management / AAA / Local users
  • Cisco IOS-XR - added ACL support
  • Cisco IOS-XR - added support for port channels
  • Extreme XOS - Add support for switchport
  • Juniper Junos - added support for OSPFv3
  • Juniper Junos - added VXLAN support

Breaking changes

  • Table Technology->Security->Object Groups was dropped. All object groups are now part of the new security model. API calls to URL /v1/tables/security/acl/object-groups will no longer be working.

  • For tables Technology->Security->Access lists (/v1/tables/security/acl) and Zone Firewall (/v1/tables/security/zone-firewall/policies), all columns except name were dropped (seq, srcAddresses, dstAddresses, inAcl, outAcl, term, action, actionName and matches for ACL table and type, fromZone, toZone, seq, src, dst, appNames and actions for Zone Firewall table) as new security model is represented by a tree. Because of that, it can't be fitted into a table format.

  • Snapshot cannot be refreshed from the graph in this release. This function will come back in the following release 4.1.

  • API for pathlookup has changed see API Documetation

Improvements

The visualization part of the application was fully rewritten to boost performance and capabilities.

  • The brand new UI
  • Visualize your topology with a range of built-in layouts (or layout only selected nodes)
  • Intent-based networking has never been easier, the results are shown in the context of visualized devices.
  • Define your own preset, change colour or labels for any protocol
  • Use API to share visualizations with your wider ecosystem
  • Highlight device neighbour relationship
  • Share the view with your team
  • Export to SVG, PNG
  • Enhanced search capabilities
  • Collapse or hide devices

The path lookup simulation was also completely rewritten to packet-based path-lookup simulation.

  • The unicast simulation also supports subnets now
  • Improved ACI topology simulation
  • Added hairpin switching in different VLANs
  • Multicast options for filtering receivers added
  • Improved simulation through transit cloud including tunnelled traffic
  • New packet inspector - understand all forwarding decisions at every layer
  • Reworked security model - visualized in a tree
  • Change path lookup edge colours according to packet header priorities

Other improvements

  • Cisco ASA/FTD - added support for ‘show DNS’ command and use it for translation of FQDNs in objects/ACLs
  • Cisco WLC IOS-XE - Added parsing of wireless client IP address.
  • CheckPoint Gaia - added support for Link Aggregation (Bond interfaces)
  • Allow to use - or . characters in username
  • Device type classification for a router with unused switch module changed. Now is recognized as a router, not a layer 3 switch.
  • Host table - IP host classification improved (OUI vendor check is removed).
  • Table Technology / Interfaces / Transceivers / Statistics - add Delta High-Value column
  • Fortinet FortiGate - added missing Part Numbers to Inventory
  • Add support for onep-plain port name to number (15001) translation
  • Table Technology / CDP/LLDP / All Neighbors - show Device Explorer component for values in Remote Neighbor column
  • Updated End of life records for Cisco, Arista, Fortinet, Juniper, ProCurve, Extreme
  • End of Life summary table improved - table now shows also records that don't have introduced EoL data yet, data are grouped per vendor and add new column Replacement
  • Routing edge improvement for tunnel interfaces with unnumbered IP addresses.
  • Make LDAP group matching case insensitive.
  • Inventory host table - hosts connected to ACI with default gateway on the non-ACI device have now edge switch.
  • Pathlookup - ACI to FW connection added
  • Table Management / Changes - added column Snapshot name for better orientation
  • Tables - CSV Export - the format was changed and it's fully compliant with RFC 4180
  • Site separation - added pagination when exists a lot of regex rules

Bug Fixes

  • Fix for snapshot clone process in a stuck state
  • Site separation - preview results now respect transformation settings.
  • Snapshot Management - fixed empty status of the snapshot
  • Table component - Reset table settings didn't work - fixed
  • The toggle Allow using telnet protocol didn't work - fixed
  • Transceivers statistics table - delta column calculation fix
  • Arista EOS - /commands/arista/_eos/switchport - full cmd syntax used to prevent ambiguous command errors
  • Arista EOS - add support for another format output of the show poe command
  • Arista EOS - ARP in some cases was not parsed whole interface name for ARP record
  • Arista EOS - fixed false-positive error regarding VPN/VRF in show ip interface command
  • Arista EOS - fixed missing IP phones on some devices
  • Arista EOS - fixed parsing of show interfaces vxlan 1 for interfaces with description
  • Arista EOS - fixed parsing of show ip route command in case VRF Leaks are in it
  • Arista EOS - fixed parsing of different output for command show mlag detail
  • Arista EOS - fixed parsing of different output for command show ntp ass
  • Arista EOS - Syslog - information is parsed from show running-config instead of show logging
  • Aruba CX - commands/arubacx/interface - fixed parsing for ip address / mask
  • Aruba switch - standardize port speed units with other vendors
  • Checkpoint Gaia - commands/checkpoint/_gaia/cluster/members/interfacesAll - fixed parsing for different command output
  • CheckPoint Gaia - fixed collecting of nested network / service groups in security policies
  • CheckPoint Gaia - fixed discovery on devices where the command show management interface is not available
  • CheckPoint Gaia - fixed parsing of different output for command show cluster members interfaces all
  • CheckPoint Gaia - fixed parsing of OSPF InterArea and External routes
  • CheckPoint Gaia (Security Management) - don’t download policy packages without configured installation target
  • Cisco - fix error created by calling ambiguous command (show interface switchport, show interface status err-disabled, show ip interface, show spanning-tree bpdu)
  • Cisco - fixed ambiguous command sh mpl interf by show mpls interfaces
  • Cisco - fixed parsing of commands show mac address-table multicast and show mac-address-table multicast for cases there are unexpected lines at the beginning of the output
  • Cisco - Fixed parsing of VRF Route-Targets in an IP format
  • Cisco - various platforms - suppress error messages when tunnel present on port.
  • Cisco ACI - fixed parsing of 'inherit' speed value from show interface command
  • Cisco ACI, NX-OS - fixed parsing of show environment command in case power supply’s column model is empty
  • Cisco HSRP - fixed preemption
  • Cisco IOS - add stacking support for catalyst 2960-s platform
  • Cisco IOS - commands/cisco/mcast/macMulticast - add parsing support for MAC table records with multiple interfaces per row
  • Cisco IOS - commands/cisco/mcast/pimNeighbor - fixed missing PIM version & different output structure on old IOS version
  • Cisco IOS - commands/cisco/vrrp - fixed parsing of preempt parameter
  • Cisco IOS - Fixed parsing for AAA section from running config.
  • Cisco IOS - fixed parsing of show power inline command for cases of empty device name
  • Cisco IOS - fixed parsing of "show version" command in case of faulty master switch
  • Cisco IOS - Fixed parsing of command sh ip mroute vrf \<vrfName> that would get translated by the DNS server
  • Cisco IOS - fixed parsing of command "show ip igmp snooping groups" in case port list does not contain any interface for a group
  • Cisco IOS - fixed parsing of the different output for command show ip flow export command
  • Cisco IOS - fixed parsing of the different output format of command show ip mroute count
  • Cisco IOS - removed false positive error emitting in show monitor detail command
  • Cisco IOS - tasks/deviceConfig/current - allow empty configuration when device return it
  • Cisco IOS + IOS-XE - fixed false-positive error detection in command show dot1x all details in case of Tacacs session expiration.
  • Cisco IOS cat9300 - commands/cisco/vxlan/nveVni - fixed parsing for new command output format
  • Cisco IOS-XE - added parsing of another format of show env all and show env status
  • Cisco IOS-XE - Fixed parsing of command show interfaces transceiver detail for another output format
  • Cisco IOS-XE fixed parsing of show environment all command for devices with multiple PSU
  • Cisco IOS-XR - ACL add suport for networks in CIDR format
  • Cisco IOS-XR - fixed parsing for dot1x interfaces configured as authenticator and supplicant
  • Cisco IOS-XR - Removed backup (FRR) routes from routing tables.
  • Cisco IOS-XRv - fixed platform, model and uptime parsing
  • Cisco IOS/IOS-XE - fixed parsing of CVTA phone port and Two-port Mac Relay CDP capabilities
  • Cisco ISA - commands/_osVersions/showVersion - fixed parsing of ISA platform
  • Cisco Meraki - API v0 input validation updated for endpoint switch-ports/get-device-switch-port-statuses
  • Cisco Meraki - commands/cisco/_meraki/v0/devices/switch/ports - Unexpected stp guard value: root guard.
  • Cisco Meraki - fixed parsing of Meraki device clients.
  • Cisco Nexus - commands/cisco/mac - Added support for FabricPath MAC entries
  • Cisco Nexus - commands/cisco/switchport - fix parsing for VLAN ID ranges that are split over multiple lines
  • Cisco Nexus - fixed parsing of show policy-map system type network-qos command to support another output format
  • Cisco Nexus - show environment fex all cmd - added support of absent PSU parsing
  • Cisco Nexus - added parsing of another output format of show logging server command
  • Cisco Nexus - fixed parsing of FEX environment information
  • Cisco Nexus - fixed parsing of in/out bytes, multicasts and broadcasts from show interface command
  • Cisco Nexus - Fixed parsing of STP port status on STP broken ports.
  • Cisco Nexus, ACI - fixed Device Mode value for FEX devices in Technology/Platforms/Environment
  • Cisco nx9000-aci - commands/cisco/igmp/group - Group IP parsing fix
  • Cisco SG - commands/_osVersions/showVersion - Add OS discovery support for cisco Sg220.
  • Dell Powerconnect - added MTU and MAC for interfaces
  • Dell Powerconnect - fixed parsing of MAC address from show interfaces command
  • Dell Powerconnect - fixed parsing of speed and duplex from show interfaces status command to support also N/A and unknown values
  • Dell Powerconnect n1500 - Fixed parsing for the command show spanning-tree detail.
  • Duplicate IP table - false-positive unnumbered IP removed
  • Extreme XOS - added support for another output format of show sharing command
  • Extreme XOS - show ports transceiver information detail fixed parsing of -infinity value
  • Extreme XOS - fixed parsing of port names for show stpd <stpdDomain> ports counters command
  • Extreme Enterasys - tasks/portChannel - port state fix
  • Extreme XOS - Fixed parsing of command 'show ip-security dhcp-snooping vlan' to allow more or none ports in Trusted ports section
  • Extreme XOS - fixed parsing of command show ports transceiver information detail to allow transceivers without any statistics
  • F5 - commands/f5/_big-ip/listNetSelf - add support of ipv6 addresses
  • F5 BigIP - fixed parsing of Cluster members if they don't have Failover Unicast configured.
  • Fortinet FortiGate - commands/fortinet/diagSysNtpStatus - fixed parsing if all configured servers are unresolved
  • Fortinet FortiGate - fixed parsing of get system status command for FortiGateRugged platform to allow IPF device discovery
  • Fortinet FortiGate - LLDP link wasn’t established for HA ports
  • Fortinet FortiGate - Routed port classification fix for L2 edges
  • HP Aruba - commands/_osVersions/showVersion - fixed parsing for Aruba Mobility Master and Mobility Controller.
  • HP Aruba - Mobility Master - platform and LLDP parsing fixed
  • HP Aruba 7200 - Fix parsing for APs that dont respond to show ap debug system-status ap-name <apName> command.
  • HP Aruba CX - fixed memory parsing
  • HP Aruba CX - fixed parsing for show vsx brief with state in sync-primary
  • HP Aruba CX - fixed parsing of show interface command with different output structure
  • HP Aruba CX - fixed parsing of different output for command show vsx status
  • HP Aruba CX - fixed parsing of property LAST in command show ntp association
  • HP Aruba S3500-24P - commands/hp/_aruba/inventory - Fixed parsing of serial number for Aruba switch.
  • HP Aruba switch - added parsing of the different output format of show tech buffers command
  • HP Aruba switch - fixed parsing of different output for command show spanning-tree
  • HP Aruba switch - fixed STP task mapping for RPVST for cases designated bridge ID is missing.
  • HP ArubaCX - fix parsing of show ip ospf neighbor detail command in case priority is missing
  • HP ArubaCX - fix parsing of command show ip ospf interface for cases local IP address is missing
  • HP ArubaCX - fix parsing of command show ip ospf interface from Aruba OS version 10.07 and higher
  • HP ArubaCX - fixed parsing of show interface mgmt in case mgmt interface is disabled
  • HP ArubaCX - fixed parsing of show ip ospf interface all-vrfs and show ip ospf neighbor detail to not change VRF name to lower case
  • HP ArubaCX - fixed uptime parsing (it isn't always provided)
  • HP Comware - added support for another output format of display arp command
  • HP Comware - fixed parsing of display fan command for the different output format
  • HP Comware - fixed parsing of display ip interface command
  • HP Comware - fixed parsing of display power command for the different output format
  • HP Comware - fixed parsing of display ospf interface verbose command to support multiple areas for process ID and removed false positive error emitting in case there is configured process without any area
  • HP Comware - fixed parsing of commands with large output (added cli clearing for Comware 3 format)
  • HP Comware - tasks/l2Interfaces - fixed mapping of interfaces in case trunk doesn't contain any permitted vlans
  • HP Comware 5130 - commands/hp/_comware/currentConfiguration - AAA scheme fixed parsing for test-profile in aaa server configuration
  • Juniper Junes - fixed parsing of different output for command show configuration | display set
  • Juniper Junos - added parsing for another output format of command show lldp neighbor
  • Juniper Junos - fixed false-positive error emitting in STP task for STP disabled interfaces
  • Juniper Junos - fixed mapping of stacking for cases switch is not present (disconnected)
  • Juniper Junos - fixed parsing of show chassis environment command to support different output format of fans
  • Juniper Junos - fixed parsing of show route command for discarded routes
  • Juniper Junos - fixed parsing of show vrrp detail command in case version is missing
  • Juniper Junos - Fixed parsing of LLDP neighbors.
  • Juniper Junos - fixed parsing of the routing table to parse correctly Administrative Distance and Metric
  • Juniper Junos - fixed parsing of secondary address for command show interfaces statistics detail
  • Juniper Junos - removed duplicates in the routing table
  • Mikrotik RB1100 - Fixed parsing for command ip ipsec installed-sa print detail
  • Mikrotik RouterOS - fixed parsing of IP addresses of actual-interface in command 'ip address print detail'
  • Palo Alto - fixed parsing of different output for command show routing route
  • Palo Alto, F5 clusters - Fix for establishing routing protocol edges
  • Paloalto - fixed parsing for the routing table.
  • PaloAlto 5200 - commands/paloalto/showConfigMerged - fix parsing, when vsys has no configuration
  • Pathlookup - STP edge between switch and firewall in a cluster with virtual mac fix
  • Routing table recursive lookup for VXLAN and other forwarding properties fix
  • STP topology fix for port role master
  • Versa VOS - Fixed BGP task mapping for cases total received Pfx is not available.
  • Versa VOS - fixed mapping of API endpoint /vnms/dashboard/appliance/<appliance>/live?command=ospf/interface/int-extensive
  • Wrong MAC address classification as a phone for proxy ARP fix.